SJ 2835 - 1987-十字槽盘头螺钉和弹垫组合- 易紧通

会员中心 | English | 繁體中文

十字槽盘头螺钉和弹垫组合 SJ 2835 - 1987

选择规格尺寸点击↓

M2.5

尺寸单位: mm

原电子工业部SJ 2835 - 1987 SJ2835 2835SJ 十字槽盘头螺钉和弹垫组合

扫一扫分享

公差公制螺纹极限尺寸米/英制螺纹对照螺纹直径与受力截面积毛坯直径

螺纹规格
d

M2.5

P	螺距
d_k	最大值
d_k	最小值
k	最大值
k	最小值
a	最大值
槽号
M	最大值
插入深度 / 最大值
插入深度/ 最小值
h	最大值
h	最小值
d_c	最大值
H	最小值

0.45	0.5	0.7	0.8
4.5	5.5	7	9
4.1	5	6.5	8.4
1.8	2.15	2.75	3.45
1.6	1.85	2.45	3.15
0.9	1	1.4	1.6
1	2	2	2
2.6	3.5	4.1	4.8
1.42	1.43	2.03	2.73
1	0.86	1.45	2.14
0.9	0.9	1.1	1.3
0.7	0.7	0.9	1.1
4.65	5.55	6.55	8.3
1.6	1.6	2	2.4

①,技术条件应符合 SJ 2837-87 《十字槽组合螺钉技术条件》的规定。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 9074.1 - 2018	螺栓或螺钉和平垫圈组合件 Bolt or Screw and Washer Assemblies with Plain Washers 供应商(5)
2	[国标] GB /T 9074.5 - 2004	十字槽小盘头螺钉和平垫圈组合件 Cross Recessed Small Pan Head Screw and Washer Assemblies with Plain Washers 供应商(2)
3	[国标] GB /T 9074.1 - 2002	螺栓或螺钉和平垫圈组合件 Bolt or Screw and Washer Assemblies with Plain Washers 供应商(5)
4	[国标] GB /T 9074.1 - 1988	十字槽盘头螺钉和平垫圈组合 Cross Recessed Pan Head Screws and Plain Washers Assemblies 供应商(5)
5	[国标] GB 9074.2 - 1988	十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies 供应商(3)
6	[国标] GB 9074.3 - 1988	十字槽盘头螺钉和弹簧垫圈组合件 Cross Recessed Pan Head Screws and Single Coil Spring Lock Washers Assemblies 供应商(3)
7	[国标] GB 9074.4 - 1988	十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross Recessed Pan Head Screws, Single Coil Spring Lock Washer and Plain Washers Assemblies 供应商(14)
8	[国标] GB /T 9074.5 - 1988	十字槽小盘头螺钉和平垫组合 Cross Recessed Small Pan Head Screw and Plain Washer Assemblies 供应商(2)
9	[国标] GB /T 9074.6 - 1988	十字槽小盘头螺钉和大平垫组合 Cross Recessed Small Pan Head Screw and Large Plain Washer Assemblies 供应商(2)
10	[国标] GB 9074.7 - 1988	十字槽小盘头螺钉和弹簧垫圈组合件 Cross Recessed Small Pan Head Screw and Single Coil Spring Lock Washer Assemblies 供应商(2)
11	[国标] GB 9074.8 - 1988	十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件 Cross Recessed Small Pan Head Screw, Single Coil Spring Lock Washer and Plain Washer Assemblies 供应商(11)
12	[国标] GB 9074.9 - 1988	十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross Recessed Countersunk Head Screw and Countersunk Serrated External Toothed Lock Washer Assemblies 供应商(1)
13	[国标] GB /T 9074.1 (S11)	内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws and Washer Assemblies with Plain Washers 供应商(1)
14	[国标] GB /T 9074.32 - 2017	螺栓或螺钉和锥形弹性垫圈组合件 Bolt or Screw and Washer Assemblies with Conical Spring Washers
15	[国标] GB 9074.10 - 1988	十字槽半沉头螺钉和锥形锁紧垫圈组合 Cross Recessed Raised Countersunk Head Screw and Countersunk External Toothed Lock Washer Assemblies
16	[国标] GB /T 9074.1 (S3)	十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws and Washer Assemblies with Plain Washers
17	[国标] GB /T 9074.1 (S4)	内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws and Washer Assemblies with Plain Washers
18	[国标] GB /T 9074.1 (S5)	开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws and Washer Assemblies with Plain Washers
19	[国标] GB /T 9074.1 (S6)	开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws and Washer Assemblies with Plain Washers
20	[国标] GB /T 9074.1 (S10)	内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws and Washer Assemblies with Plain Washers
21	[国标] GB /T 9074.1 (S12)	六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts and Washer Assemblies with Plain Washers
22	[国标] GB /T 9074.1 (S13)	六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread) and Washer Assemblies with Plain Washers
23	[德标] DIN 6900-1 - 1990	十字盘头螺钉和平垫圈的组合螺钉 Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer 供应商(1)
24	[德标] DIN 6900-5 - 2004	锥形弹性垫圈与螺钉组合件 Assemblies with Coarse Threaded Screws and Captive Conical Spring Washer
25	[德标] DIN 6304 (E) - 2002	带固定旋杆的卡式螺栓 E型 Tommy Screws with Fixed Clamping Bolt - Form E
26	[德标] DIN 6304 (F) - 2002	带固定旋杆的卡式螺栓 F型 Tommy Screws with Fixed Clamping Bolt - Form F
27	[德标] DIN 6306 (D) - 2002	带移动卡式螺栓的定位销钉 D型 Tommy Screws with Moveable Clamping Bolt - Type D
28	[德标] DIN 6306 (E) - 2002	带移动卡式螺栓的定位销钉 E型 Tommy Screws with Moveable Clamping Bolt - Type E
29	[德标] DIN 6900-2 - 1990	开槽螺钉和波形垫圈组合 Slotted Screws and Wave Washers Assemblies
30	[德标] DIN 6900-3 - 1990	鞍形弹簧垫圈与螺钉组合件 Screw and Washer Assemblies with Coarse Thread with Curved Spring Lock Washer
31	[德标] DIN 6900-4 - 1990	齿形弹簧垫圈与螺钉组合件 Screw and Washer Assemblies with Coarse Threaded Screws with Captive Serrated Lock Washer
32	[德标] DIN 6900-5 - 1990	锥形弹性垫圈与螺钉组合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer
33	[国际] ISO 2982-2 (Clip) - 2013	滚动轴承附件 - 锁紧卡组件 Rolling Bearings - Accessories - Locking Clip Assemblies
34	[国际] ISO 10644 - 2009	螺丝和钢制平垫圈组合件垫圈硬度200HV和300HV Screw and Washer Sssemblies Made of Steel with Plain Washers - Washer Hardness Classes 200 HV and 300 HV
35	[国际] ISO 10644 - 1998	螺丝和钢制平垫圈组合件垫圈硬度200HV和300HV Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV
36	[日标] JIS B 1188 (T1A) - 1995	十字槽盘头螺钉、平垫和弹垫组合件 Cross Recessed Pan Head Screws, Spring Lock Washer and Plain Washer Assemblles 供应商(2)
37	[日标] JIS B 1554 (AL/ALL) - 2016	锁紧卡组件 Locking Clip and Applicable Bolt
38	[日标] JIS B 1130 - 2012	十字盘头螺钉和平垫圈的组合 Cross Recessed Pan Screw Assemblies with Washers
39	[日标] JIS B 1130 - 2006	十字盘头螺钉和平垫圈的组合 Cross Recessed Pan Screws and Plain Washers Assemblies
40	[日标] JIS B 1188 (T1B) - 1995	十字槽盘头螺钉和弹垫组合 Cross Recessed Pan Head Screws And Spring Lock Washer Assembiles
41	[日标] JIS B 1188 (T1C) - 1995	十字盘头螺钉和平垫圈组合 Cross Recessed Pan Head Screws And Plain Washer Assemblies
42	[日标] JIS B 1188 (T1D) - 1995	十字盘头螺钉和外齿锁紧垫圈组合 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies
43	[汽标代号] Q 230B	十字槽盘头螺钉与平垫组合 Cross Recessed Pan Head Tapping Screws and Plain Washers Assemblies 供应商(1)
44	[汽标代号] Q 232	十字槽盘头螺钉与弹垫组合 Cross Recessed Pan Head Screws and Spring Washer Assemblies 供应商(1)
45	[汽标代号] Q 234	十字槽盘头螺钉与外锯齿锁紧垫圈组合 Cross Recessed Pan Head Screws and Serrated Lock Washers External Teeth Assemblies 供应商(1)
46	[汽标代号] Q 236B	十字槽盘头螺钉与弹垫平垫组合 Cross Recessed Pan Head Screws Combine with Spring Washer and Plain Washers 供应商(2)
47	[汽标代号] Q 140B	六角头螺栓与平垫圈组合件 Hex Head and Plain Washer Combination Bolt
48	[汽标代号] Q 240	十字槽沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross Recessed Countersunk Head Screws and Serrated Lock Washers External Teeth Assemblies
49	[汽标代号] Q 242	十字槽半沉头螺钉与锥形外锯齿锁紧垫圈组合 Cross Recessed Countersunk Raised Head Screws and Serrated Lock Washers External Teeth Assemblies
50	[机械行业] JB /T 7919.3 - 1999	锁紧卡组件 Locking Clip Assemblies
51	[美标] ASME/ANSI B 18.13.1M - 2011	米制内六角圆柱头螺钉和弹垫组合 SEMS [Table 1] Metric Socket Head Cap Screw and Spring Washer Assemblies-SEMS(Machine Screw Thread Diameter) 供应商(1)
52	[美标] ASME/ANSI B 18.13.1M - 2011	米制开槽盘头螺钉和弹垫组合 SEMS[Table 1] Metric Slotted Pan Head Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter)
53	[美标] ASME/ANSI B 18.13 - 1996	内六角圆柱头螺钉和弹垫组合SEMS [Table 1] Socket Head Cap Screw and Spring Washer Assemblies - SEMS
54	[美标] ASME/ANSI B 18.13 - 1996	开槽盘头螺钉和弹垫组合 SEMS[Table 2] Slotted Pan Head Screw and Spring Washer Assemblies - SEMS
55	[原电子工业部] SJ 2834 - 1987	十字盘头螺钉和平垫圈的组合
56	[原电子工业部] SJ 2836 - 1987	十字盘头螺钉和平、弹垫组合
57	[企标] YJT 4031	皇冠螺钉供应商(1)
58	[企标] YJT 4068 (GB9074.4T)	内六角花形槽盘头平弹垫组合件 Hexalobular Socket Pan Head Screws, Single Coil Spring Lock Washer and Plain Washer Assembles 供应商(1)
59	[企标] YJT 4079 (GB 70.1 + GB 9074.13)	内六角圆柱头螺钉和平垫、弹垫组合件 Hexagon Socket Head Cap Screws with Single Coil Lock Washer and Plain Washer Assemblies 供应商(5)
60	[企标] YJT 8021	十一槽子母铆钉供应商(1)
61	[西门子] SN 60736	内六角花形盘头螺钉组合件供应商(1)
62	[德标] DIN EN ISO 10644 - 2009	螺丝和钢制平垫圈组合件垫圈硬度200HV和300HV Screw and Washer Assemblies Made of Steel with Plain Washers – Washer Hardness Classes 200 HV and 300 HV 供应商(1)
63	[德标] DIN EN ISO 10644 (S11)	内六角花形（梅花槽）盘头螺钉和平垫圈组合件 Hexagon Lobular Socket Pan Head Screws and Washer Assemblies with Plain Washers 供应商(1)
64	[德标] DIN EN ISO 10644 (S3)	十字槽盘头螺钉和平垫圈组合件 Cross Recessed Pan Head Screws and Washer Assemblies with Plain Washers
65	[德标] DIN EN ISO 10644 (S4)	内六角圆柱头螺钉和平垫圈组合件 Hexagon Socket Head Cap Screws and Washer Assemblies with Plain Washers
66	[德标] DIN EN ISO 10644 (S5)	开槽盘头螺钉和平垫圈组合件 Slotted Pan Head Screws and Washer Assemblies with Plain Washers
67	[德标] DIN EN ISO 10644 (S6)	开槽圆柱头螺钉和平垫圈组合件 Slotted Cheese Head Screws and Washer Assemblies with Plain Washers
68	[德标] DIN EN ISO 10644 (S10)	内六角花形（梅花槽）圆柱头螺钉和平垫圈组合件 Hexalobular Socket Head Cap Screws and Washer Assemblies with Plain Washers
69	[德标] DIN EN ISO 10644 (S12)	六角法兰面螺栓和平垫圈组合件 Hexagon Flange Bolts and Washer Assemblies with Plain Washers
70	[德标] DIN EN ISO 10644 (S13)	六角法兰面螺栓（细牙）和平垫圈组合件 Hexagon Flange Bolts (Fine Pitch Thread ) and Washer Assemblies with Plain Washers
71	[美标] ASME B 18.13 - 2018 (ERTA)	开槽盘头螺钉和弹垫组合SEMS [Table 2] Slotted Pan Head Screw and Spring Washer Assemblies-SEMS
72	[美标] ASME B 18.13 - 2017	内六角圆柱头螺钉和弹垫组合 SEMS[Table 1] Helical Spring Lock Washers for Socket Head Cap Screw SEMS