Vibrations, Waves, & Sound

Presentation on theme: "Vibrations, Waves, & Sound"— Presentation transcript:

1 Vibrations, Waves, & Sound
Chapters 25 & 26

2 25.1 Vibration of a Pendulum
The period of the pendulum depends only on the length of a pendulum and the acceleration of gravity.

3 Period The time it takes for one complete cycle of motion.
Represented by the symbol T Unit of seconds

4 Frequency The number of cycles completed in a unit of time (usually seconds) Represented by the symbol f Unit of s-1 (also known as Hertz)

5 Period and Frequency f = 1/T and T = 1/f
Period and frequency are inversely related. f = 1/T and T = 1/f

6 A plucked string vibrates back and forth10 times each second.
What is the period? 1/10 s What is the frequency? 10 cycles per second (10 Hz)

7 What is a wave? A wave is an means by which energy is transferred from one place to another via periodic disturbances

8 Waves transfer energy Note that, while energy is transferred from point A to point B, the particles in the medium do not move from A to B. Individual particles of the medium merely vibrate back and forth in simple harmonic motion The rate of energy transfer is proportional to the square of the amplitude When amplitude is doubled, the energy carried increases by a factor of 4.

9 25.2 Wave Description The source of all waves is something that vibrates. The back-and-forth vibratory motion of a swinging pendulum is called simple harmonic motion.

10 25.2 Wave Description A sine curve is a pictorial representation of a wave.

11 Wave Parts Amplitude - the maximum displacement from equilibrium.
The high points on a wave are called crests. The low points on a wave are called troughs. The wavelength of a wave is the distance from one part of a wave to the next identical part.

12 25.3 Wave Motion When energy is transferred by a wave from a vibrating source to a distant receiver, no matter is transferred between the two points.

13 Mechanical Waves Waves that require a physical medium to travel through. Examples of physical media are water, air, string, slinky.

14 Electromagnetic waves
Waves that do not require a physical medium. Comprised of oscillating electric and magnetic fields Examples include x-rays, visible light, radio waves, etc.

15 25.4 Wave Speed You can calculate the speed of a wave by multiplying the wavelength by the frequency.

16 Wave speed Wave speed is determined completely by the characteristics of the medium For an unchanging medium, wave speed is constant

17 25.4 Wave Speed think! If a water wave vibrates up and down two times each second and the distance between wave crests is 1.5 m, what is the frequency of the wave? What is its wavelength? What is its speed? Answer: The frequency of the wave is 2 Hz; its wavelength is 1.5 m; and its wave speed is 3 m/s.

18 25.5 Transverse Waves Particles of the medium move perpendicular to the direction of energy transfer You should be able to identify crests, troughs, wavelength (distance traveled during one full cycle), and amplitude Crest Trough

19 25.6 Longitudinal Waves Particles of the medium move parallel to the direction of energy transfer Be able to Identify compressions, rarefactions, wavelengths Compressions Rarefactions

20 25.7 Interference The combination of two or more waves in a medium at the same time. Matter cannot occupy the same space at the same time, but energy can.

21 25.7 Interference The Superposition Principle describes what happens when waves interfere… Waves (energy) pass through each other completely unaffected The medium will be displaced an amount equal to the vector sum of what the waves would have done individually

22

23

24 Constructive Interference
-pulses to same side of equilibrium -resulting medium displacement is greater than original waves -pulses continue unaffected

25 Destructive Interference
Pulses on opposite sides of equilibrium Resulting displacement is less than at least one of the originals Pulses continue unaffected

26 Complete Destructive Interference

27 Interference patterns
Out of phase – destructive interference In phase – constructive interference

28 25.8 Standing Waves A wave pattern that results when two waves of the same frequency, wavelength, and amplitude travel in opposite directions and interfere.

29 25.8 Standing Waves Only certain frequencies produce standing wave patterns.

30 25.8 Standing Waves Nodes are areas of complete destructive interference and have no displacement Antinodes are areas of constructive interference and have maxiumum displacement

31 25.9 The Doppler Effect As a wave source approaches, an observer encounters waves with a higher frequency. As the wave source moves away, an observer encounters waves with a lower frequency.

32 25.9 The Doppler Effect The greater the speed of the source, the greater will be the Doppler effect. Family Video

33 25.9 The Doppler Effect The Doppler effect also occurs for light.
When a light source approaches, there is an increase in its measured frequency (blue shift) When it recedes, there is a decrease in its frequency (red shift)

34 26.1 The Origin of Sound All sounds originate in the vibrations of material objects. Pitch is the human perception of frequency

35 26.1 The Origin of Sound The normal range of human hearing is 20 to 20,000 hertz. Sound waves with frequencies below 20 hertz are called infrasonic. Sound waves with frequencies above 20,000 hertz are called ultrasonic.

36 26.2 Sound in Air Consider sound waves in a tube.
When the prong of a tuning fork next to the tube moves toward the tube, a compression enters the tube. When the prong swings away, in the opposite direction, a rarefaction follows the compression. As the source vibrates, a series of compressions and rarefactions is produced.

37 26.3 Media That Transmit Sound
The speed of sound differs in different materials. In general, sound is transmitted faster in liquids than in gases, and still faster in solids. Sound cannot travel in a vacuum. Bell in vacuum

38 26.4 Speed of Sound The speed of sound depends on the characteristics of the medium. A material’s temperature, mass of particles, density, and elasticity are all factors. Helium & Sulfur Hexafluoride - In room temperature air, sound travels about 340 m/s - In water, sound travels about 1200 m/s - In aluminum, sound travels about 5000 m/s

39 26.6 Natural Frequency When any object composed of an elastic material is disturbed, it vibrates at its own special set of frequencies, which together form its special sound.

40 26.7 Forced Vibration Sounding boards are an important part of all stringed musical instruments because they are forced into vibration and produce the sound.

41 26.8 Resonance If the frequency of a forced vibration matches an object’s natural frequency, resonance dramatically increases the amplitude. Resonance occurs whenever successive impulses are applied to a vibrating object in rhythm with its natural frequency.

42 Resonance Videos How to Break a Glass Jaime Vendera
Tacoma Narrows Bridge

43 Reflection The bouncing of a wave when it encounters the boundary between two different media

44 Fixed End Reflection At a fixed boundary, waves are inverted as they are reflected.

45 Free End Reflection At a free boundary, waves are reflected on the same side of equilibrium