Senior RF Engineer at Skyworks
I am a senior RF engineer at Skyworks. Previously I was a postdoctoral researcher at UCLA and UWaterloo. My research includes different aspects of wireless networks, spanning from high data rate mmWave communication to low power sensing devices. My passion is to develop innovative wireless networks with optimized power consumption and enhanced network throughput. I'm always open for a coffee chat about any thoughts or ideas on wireless systems. Let's get in touch! :)
Thinking of extending mmWave 5G by drones? It is published in Mobicom'24
Our mmPlug paper is published at Mobicom'23
I am serving as Technical Program Committee of NSDI'24
The 4th SIGCOMM paper! In SIGCOMM'23 we showed two way mmWave backscattering for communication and localization
Our mmWave metasurface for both reflective and transmissive beamforming was presented at NSDI'23
Is your 5G signal weak? check out our paper "5G in the sky" published in Hotmobile'22
Our backscattering mmWave paper is accepted for SIGCOMM'21
The results of our mmWave phased array IC for Satcom is published in MTT
"A Time Modulated Array With Polarization Diversity Capability" is published on IEEE Access
Our US patent "Wideband substrate integrated waveguide slot antenna" is published
Our paper "Sensing finger input using an rfid transmission line" is accepted in Sensys '20
The first results of our first mmWave backscatter prototype is published in HotNets'20
The initial results of our mmWave beamforming IC is published in IMS 2020
Here is a short list of recent publications. For the full list of publications please refer to my scholar page.
ACM MobiCom'24, "Enabling On-Demand Low-Power mmWave Repeaters via Passive Beamforming"
ACM MobiCom'23, "Bringing Millimeter Wave Technology to Any IoT Device"
ACM SIGCOMM'23, "A Millimeter Wave Backscatter Network for Two-Way Communication and Localization"
ACM NSDI'23, "mmWall: A Steerable, Transflective Metamaterial Surface for NextG mmWave Networks"
ACM SIGCOMM'21, "mmTag: a millimeter wave backscatter network"
IEEE MTT 2021, "A High-Efficiency 27-30-GHz 130-nm Bi-CMOS Transmitter Front End for SATCOM Phased Arrays"
ACM SIGCOMM'20, "WiTAG: Seamless WiFi Backscater Communication"
ACM Sensys'21, "Sensing finger input using an rfid transmission line"
ACM SIGCOMM'19, "A millimeter wave network for billions of things"
IEEE AWPL 2019, "A figure of merit in a time-modulated array"
IEEE TAP 2018, "Efficiency Enhancement of TMA with Optimized Switching Sequences"
A mmWave backscatter network with two way communiction and sensing capabilities
Uses a 2 port Frequency Scanning Antenna for communication and sensing
Employs a low power Env Detector for communication at the tag
A plug and play module that enables any sub 6GHz IoT to transmit and receive at mmWave band
Only uses a single LNA
Genuinely leverages coupling between elements for generating mmWave tone
A transmissive and reflective metasurface wall to boost the SNR of 5G mmWave signals
Creates and steers a beam toward a user and AP
Capable to cover multiple users
A passive backscattering tag for Gbps communication.
Completely passive beamforming at mmWave band
Enables high data rate communication with very low power consumption within 14m range
A millimeter wave network for billions of things
A low cost and low power IoT device at mmWave that fits as a add on top of a Raspberry Pi
Introduces Over The Air Modulation (OTAM)
An innovative beamforming technique that uses RF switches instead of phase shifter
Enables multiple orthogonal beams at the same time
Capable to cover multiple users with polarization diversity