[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Andrews, 1995 - Google Patents

Roadmap for extending IEEE 1149.1 for hierarchical control of locally-stored, standardized command set, test programs

Andrews, 1995

Document ID
1673635052018099353
Author
Andrews J
Publication year
Publication venue
Proceedings., International Test Conference

External Links

Snippet

This paper proposes a roadmap for an embedded system test strategy that uses IEEE Standard 1149.1 as a multidrop, addressable backplane test bus to provide test access by a central diagnostic processor to local diagnostics contained in flash memory chips located on …
Continue reading at ieeexplore.ieee.org (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/3181—Functional testing
    • G01R31/3185—Reconfiguring for testing, e.g. LSSD, partitioning
    • G01R31/318533—Reconfiguring for testing, e.g. LSSD, partitioning using scanning techniques, e.g. LSSD, Boundary Scan, JTAG
    • G01R31/318558—Addressing or selecting of subparts of the device under test
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/3181—Functional testing
    • G01R31/3185—Reconfiguring for testing, e.g. LSSD, partitioning
    • G01R31/318533—Reconfiguring for testing, e.g. LSSD, partitioning using scanning techniques, e.g. LSSD, Boundary Scan, JTAG
    • G01R31/318555—Control logic
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/3181—Functional testing
    • G01R31/3185—Reconfiguring for testing, e.g. LSSD, partitioning
    • G01R31/318533—Reconfiguring for testing, e.g. LSSD, partitioning using scanning techniques, e.g. LSSD, Boundary Scan, JTAG
    • G01R31/318572—Input/Output interfaces
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/3181—Functional testing
    • G01R31/319—Tester hardware, i.e. output processing circuit
    • G01R31/31903—Tester hardware, i.e. output processing circuit tester configuration
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/3181—Functional testing
    • G01R31/319—Tester hardware, i.e. output processing circuit
    • G01R31/31917—Stimuli generation or application of test patterns to the device under test [DUT]
    • G01R31/31926—Routing signals to or from the device under test [DUT], e.g. switch matrix, pin multiplexing
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/3181—Functional testing
    • G01R31/3183—Generation of test inputs, e.g. test vectors, patterns or sequence
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F11/00—Error detection; Error correction; Monitoring
    • G06F11/22—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing
    • G06F11/26—Functional testing
    • G06F11/273—Tester hardware, i.e. output processing circuits
    • G06F11/2733—Test interface between tester and unit under test
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/317—Testing of digital circuits
    • G01R31/31712—Input or output aspects
    • G01R31/31717—Interconnect testing
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F11/00—Error detection; Error correction; Monitoring
    • G06F11/22—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing
    • G06F11/26—Functional testing
    • G06F11/273—Tester hardware, i.e. output processing circuits
    • G06F11/277—Tester hardware, i.e. output processing circuits with comparison between actual response and known fault-free response
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F11/00—Error detection; Error correction; Monitoring
    • G06F11/22—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing
    • G06F11/2205—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing using arrangements specific to the hardware being tested
    • G06F11/2236—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing using arrangements specific to the hardware being tested to test CPU or processors
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F11/00—Error detection; Error correction; Monitoring
    • G06F11/22—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing
    • G06F11/26—Functional testing
    • G06F11/27—Built-in tests
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F11/00—Error detection; Error correction; Monitoring
    • G06F11/22—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing
    • G06F11/2205—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing using arrangements specific to the hardware being tested
    • G06F11/2215—Detection or location of defective computer hardware by testing during standby operation or during idle time, e.g. start-up testing using arrangements specific to the hardware being tested to test error correction or detection circuits
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01R—MEASURING ELECTRIC VARIABLES; MEASURING MAGNETIC VARIABLES
    • G01R31/00—Arrangements for testing electric properties; Arrangements for locating electric faults; Arrangements for electrical testing characterised by what is being tested not provided for elsewhere
    • G01R31/28—Testing of electronic circuits, e.g. by signal tracer
    • G01R31/2851—Testing of integrated circuits [IC]
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F11/00—Error detection; Error correction; Monitoring
    • G06F11/36—Preventing errors by testing or debugging software
    • G06F11/362—Software debugging
    • G06F11/3648—Software debugging using additional hardware
    • G—PHYSICS
    • G11—INFORMATION STORAGE
    • G11C—STATIC STORES
    • G11C29/00—Checking stores for correct operation; Subsequent repair; Testing stores during standby or offline operation
    • G11C29/04—Detection or location of defective memory elements, e.g. cell constructio details, timing of test signals
    • G11C29/08—Functional testing, e.g. testing during refresh, power-on self testing [POST] or distributed testing
    • G11C29/12—Built-in arrangements for testing, e.g. built-in self testing [BIST] or interconnection details
    • G11C29/14—Implementation of control logic, e.g. test mode decoders
    • G—PHYSICS
    • G11—INFORMATION STORAGE
    • G11C—STATIC STORES
    • G11C29/00—Checking stores for correct operation; Subsequent repair; Testing stores during standby or offline operation
    • G11C29/04—Detection or location of defective memory elements, e.g. cell constructio details, timing of test signals
    • G11C29/08—Functional testing, e.g. testing during refresh, power-on self testing [POST] or distributed testing
    • G11C29/12—Built-in arrangements for testing, e.g. built-in self testing [BIST] or interconnection details
    • G11C29/44—Indication or identification of errors, e.g. for repair

Similar Documents

Publication Publication Date Title
CA1296109C (en) Bus executed scan testing method and apparatus
Bleeker et al. Boundary-scan test: a practical approach
US5627842A (en) Architecture for system-wide standardized intra-module and inter-module fault testing
US5828825A (en) Method and apparatus for pseudo-direct access to embedded memories of a micro-controller integrated circuit via the IEEE test access port
US6006343A (en) Method and apparatus for streamlined testing of electrical circuits
US5708773A (en) JTAG interface system for communicating with compliant and non-compliant JTAG devices
EP1402278B1 (en) Method and apparatus for optimized parallel testing and access of electronic circuits
US5568437A (en) Built-in self test for integrated circuits having read/write memory
EP1872146B1 (en) Simultaneous core testing in multi-core integrated circuits
US5428624A (en) Fault injection using boundary scan
US6000051A (en) Method and apparatus for high-speed interconnect testing
US5343478A (en) Computer system configuration via test bus
EP0640920B1 (en) Boundary-scan-based system and method for test and diagnosis
US7155370B2 (en) Reusable, built-in self-test methodology for computer systems
US5222068A (en) Processor circuit
US6826100B2 (en) Push button mode automatic pattern switching for interconnect built-in self test
EP0568132A2 (en) Test generation by environment emulation
US20040001432A1 (en) Embedding a JTAG host controller into an FPGA design
US5938779A (en) Asic control and data retrieval method and apparatus having an internal collateral test interface function
US7870448B2 (en) In system diagnostics through scan matrix
US7844867B1 (en) Combined processor access and built in self test in hierarchical memory systems
US7047458B2 (en) Testing methodology and apparatus for interconnects
US7047464B2 (en) Method and system for use of a field programmable function within an application specific integrated circuit (ASIC) to access internal signals for external observation and control
Whetsel An IEEE 1149.1 Based Logic/Signature Analyzer in a Chip.
US5068852A (en) Hardware enhancements for improved performance of memory emulation method