8000 TX and RX Activity of Router and Switch is always 0 · Issue #77 · zachcheatham/ha-omada · GitHub
[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Skip to content

TX and RX Activity of Router and Switch is always 0 #77

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Open
natellu opened this issue Aug 17, 2023 · 4 comments
Open

TX and RX Activity of Router and Switch is always 0 #77

natellu opened this issue Aug 17, 2023 · 4 comments

Comments

@natellu
Copy link
natellu commented Aug 17, 2023 •
edited
Loading

image

title states the tx and rx of both a ER605 Router and a TL-SG2008P (8 Port) Switch are not beeing updated/read at all. I didnt found any errors in the logs. Anything else i can check/need to configure?
@compumark compumark mentioned this issue Aug 31, 2023
Open
@J4CE2
Copy link
J4CE2 commented Nov 10, 2023

Can confirm the same behavior with the ER7206.

@j-loewen
Copy link
j-loewen commented Dec 6, 2023

Why is it that I can't see most of the values that are in the screenshot?

Screenshot 2023-12-05 225320

That's everything I see. My Router is an ER605 v2.0. The Controller is OC200, and the Access Points are EAP650 and EAP610. Do I need to change any settings for this?

@jodewee
Copy link
jodewee commented Dec 6, 2023

Same over here, ER7212PC

@tensiondriven
Copy link

In my case, I have an ER605 v1 w/ Omada OC200 controller, and a few AP's.

My 605 is named "Gateway" and I see the following:

I'm not able to find any metrics about bandwidth usage. (My AP's report something called "Bandwidth" in HA but it's a frequency band, not a bit-per-second.)

If I click on "Attributes" for a wireless client, I see something like this:

Source Router
Name D0-3F-27-5A-20-0F
Hostname WyzeCam
IP 10.1.1.63
MAC d0:3f:27:5a:20:0f
Wireless true
Ssid Presence
Ap MAC 00:31:92:b5:4d:18
Ap name AP Barn
Channel 6
Radio 2.4gz
Wifi mode 11ng
Signal level 67
Rssi -63

I don't seem to have any Device or Entity matching "Router".

Firmware on the ER 605 v1 is up to date at 1.3.1
OC200 1.0 Controller is running 1.26.3 Build 20230906 Rel.36269

Controller version shows "5.12.9" with no updates available.

ER506 entity (device_tracker.gateway) shows these attributes:

Source Router
Type gateway
Model ER605 v1.0
Firmware 1.3.1 Build 20231207 Rel.61384
Status 14
Status category 1

At one point, I swear I had each port on the 605 visible as a separate entity. I expect this was when i was running the "official" (integrated) Omada integration. But even then, it didn't display bandiwdth.

Is this likely a limitation of the ER 605 v1's? Perhaps someone with a v2 could comment if they see gateway/router bandwidth? This is the only/most important data point for for me. (though i must say, all the device trackers are quite awesome too!)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
5 participants
@tensiondriven @natellu @j-loewen @jodewee @J4CE2
0