8000 Cisco EPC3010 boot process locked · Issue #40 · jclehner/bcm2-utils · GitHub
[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Skip to content

Cisco EPC3010 boot process locked #40

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Open
mediotex opened this issue Nov 26, 2021 · 8 comments
Open

Cisco EPC3010 boot process locked #40

mediotex opened this issue Nov 26, 2021 · 8 comments

Comments

@mediotex
Copy link

I tried to access serial interface on Cisco EPC3010 model: the bootloader is locked, and there's no access to bootloader menu. Console output just stops print at some point, and further output is hidden from display.
output:
In that case, the only way is to get a full dump from the flash chip?
@jclehner
Copy link
Owner

Disconnect the coax, reset the modem to factory defaults. Then check if you have got SNMP access to either 192.168.0.1 or 192.168.100.1. If so, you might be able to enable the serial console via SNMP!

@mediotex
Copy link
Author

I always checked without a coax. Tried to reset, SNMP access is available, MIB tree is limited to 467 objects. Not sure what MIB can enable it.

@jclehner
Copy link
Owner

Try bfcSerialConsoleMode (1.3.6.1.4.1.4413.2.2.2.1.9.1.2.1.0) first. First set it to 2, then 0, then 2 again, and check your serial output while you're doing so.

@mediotex
Copy link
Author 
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.4413.2.2.2.1.9.1.2.1.0

@jclehner
Copy link
Owner

How about cmConsoleMode (1.3.6.1.4.1.1429.77.1.4.7.0)?

@mediotex
Copy link
Author
mediotex commented Nov 26, 2021 •
edited
Loading

Same error. The MIB tree contains only one enterprises group.

...
SNMPv2-SMI::enterprises.4491.2.1.20.1.1.1.1.2 = INTEGER: 3
SNMPv2-SMI::enterprises.4491.2.1.20.1.1.1.1.2 = No more variables left in this MIB View (It is past the end of the MIB tree)

@jclehner
Copy link
Owner

Does this modem support saving and restoring a config file?

@mediotex
Copy link
Author
643E mediotex commented Feb 14, 2022 •
edited
Loading

No, its simple data modem, not EMTA. I tried to check if I can use the 'Cable Haunt' exploit to enable shell, but this modem seems not affected. I didn't find the spectrum analyzer on 8080 port, nor on other ports, only http port 80 is open.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@jclehner @mediotex
0