Replies: 12 comments 38 replies
-
|
Can you post here what modifications did you do after cloning the repository?
This clearly shows that something was changed in configuration file which is incorrect |
Beta Was this translation helpful? Give feedback.
-
|
hi yes sorry. my mistake. for some reason the ue ipv4 addresses were wiped off! its been working since. does your solution work with dockers ok? i mean all sip services such as kamailio rtp get traffic and you have tested it with 2 phones? |
Beta Was this translation helpful? Give feedback.
-
|
What sims did you use? I think sysmocom gas to be programmed and IMS files changed prior we use VoLTE! |
Beta Was this translation helpful? Give feedback.
-
|
I typically use the below command with pySim to program the Sysmocom SIM cards
ofcourse, you need to adapt this command with appropriate ADM keys |
Beta Was this translation helpful? Give feedback.
-
|
i will try that shortly. i have got sysmoISIM-SJA5-s17 with I believe default MCC 999 and MNC 70. They also sent some k, IMSI, OP values via emails. Can we keep the MCC, MNC, IMSI, k, OP values as they send or do they need to be changed, esp MCC and MNC to 001 and 01? Thanks |
Beta Was this translation helpful? Give feedback.
-
|
You can use the default PLMN values. But 999 70 is a private network PLMN and using that may result in some restrictions on the phone to connect to certain NR bands. For example, while using 999 70 iPhones in USA are allowed to attach to limited NR bands which are reserved for private networks. On the other hand 001 01 is a test network PLMN, where the device is allowed to attach to NR bands reserved for public networks |
Beta Was this translation helpful? Give feedback.
-
|
thank you Herlesupreeth, I will try shortly. just installing ubuntu desktop on my VM to program sysmocoms! |
Beta Was this translation helpful? Give feedback.
-
|
in all of these domains, did you mean mnc01.mcc001 not mnc001.mcc001. did you have typo here mnc typing wrongly mnc001?? pdg.epc.mnc001.mcc001.pub.3gppnetwork.org --pcscf pcscf.ims.mnc001.mcc001.3gppnetwork.org --ims-hdomain ims.mnc001.mcc001.3gppnetwork.org --impi 001010123456790@ims.mnc001.mcc001.3gppnetwork.org --impu sip:001010123456790@ims.mnc001.mcc001.3gppnetwork.org |
Beta Was this translation helpful? Give feedback.
-
no, if the MNC is of two digits a zero gets appended at the start for the domain. Therefore, for MNC 01, the IMS domain is ims.mnc001.mcc001.3gppnetwork.org |
Beta Was this translation helpful? Give feedback.
-
|
can we achieve video call one way or another. if not using dialer app, can we use linphone or zoiper. if so, what can be the credentials of login.. sip needs username, password and domain. it also helps to give proxy address which is usually kamailio address. thanks |
Beta Was this translation helpful? Give feedback.
-
|
both phones are on ims during call. Are you suggesting one phone is not? from the log file, is there anything you are finding totally out of order? What i am trying to establish if we have done everything you expect for this docker solution to work. Does your solution involve UA devices to be registered in some database such as mysql which is the case when we run kamailio and rtpengine! Before call, usually registration needs to be completed from my experience. What do you think I should do as I have to show demo to my boss on Friday! |
Beta Was this translation helpful? Give feedback.
-
|
truly happiest day of my life. By selecting internet as APN on both phones and making phone call, it all went through. You are a genious and your work is truly an excellent precedent of your skills within software engineering :). I am trying now 5g and heard that there are lots of services that need to be disabled first. are you able to advise. thanks a million so far |
Beta Was this translation helpful? Give feedback.
-
|
Glad that you got the setup working.
if you want to try 5G then I would suggest giving exp_5g_ims_physs branch. It has support for VoNR calling with QoS |
Beta Was this translation helpful? Give feedback.
-
|
so i just checked out into this branch and it seems almost everything we have in master branch. Is there a sysmocom command you have that will enable all required services and disable all unnecessary services? Thanks |
Beta Was this translation helpful? Give feedback.
-
|
I would suggest to try that branch as is. If the phones dont see 5G network, then i would suggest to have a look at this - #248 |
Beta Was this translation helpful? Give feedback.
-
|
So if there is internet apn on network, can it allow WiFi devices which are not sim-enabled on open5gs to access the Internet? |
Beta Was this translation helpful? Give feedback.
-
|
No. I would suggest reading how the PDN connection in mobile networks work |
Beta Was this translation helpful? Give feedback.
-
|
Thanks Supreeth. What are possibilities of achieving call to this private network from public network? I heard of sip trunk! |
Beta Was this translation helpful? Give feedback.
-
|
I thought i will ask you as you ate the expert! Is there an antenna that I can wire directly to b210 to get at least 2 km range with your 5g solution? Don't mind wither directional or omni! |
Beta Was this translation helpful? Give feedback.
-
I dont think with just an antenna you would be able to achieve 2km range. Rather you would need some amplifiers, duplexers etc, but I am not knowledgeable in these aspects. With just antenna you could probably achieve around 200meter i think (max I tested was 50meters) |
Beta Was this translation helpful? Give feedback.
-
|
you mean power amplifiers! an engineer of mine wants to use sdr with analog 9361 to develop a repeater. so even at 200m, we pick the signal and broadcast after passing through sdr. i am not sure if it will work! is there a good telecom book on what system components are used to make up the system! |
Beta Was this translation helpful? Give feedback.
-
|
i started trying your exp_5g_ims_pyhss. it did not have grafana username and password so initially docker compose file won't start containers. then i compared with the master and added grafana settings similar to master branch. Everything works and phone connects over 5G. i dont have another 5g phone so cant test the call. but as i was streaming video on youtube, i found it will repeatedly disconnect. attached are the amf logs! any ideas? |
Beta Was this translation helpful? Give feedback.
-
No Its hard to debug with just logs, can you take a pcap (without any capture filters) on the machine running docker_open5gs and paste here? |
Beta Was this translation helpful? Give feedback.
-
|
so it turns out issue may have been with sa-deploy.yaml compose file. When i tried sa-vonr-deploy.yaml, it is not releasing gnb and videos from youtube are running ok. I will try a 5g phone to phone call in a bit. Have you tried adding another type of device such as 5g router with sysmocom sim. Not sure if it needs a different type of apn than internet and ims that we are currently configuring in webui? I use the script below to program sims. will it work for router and other devices? ./pySim-prog.py -p 0 -x 001 -y 01 -s 8988211900000000025 -i 001010123456790 -k 8baf473f2f8fd09487cccbd7097c6862 --op 11111111111111111111111111111111 -o 8E27B6AF0E692E750F32667A3B14605D -a 11111111 -n exp.test --msisdn 9076543210 --epdgid epdg.epc.mnc001.mcc001.pub.3gppnetwork.org --pcscf pcscf.ims.mnc001.mcc001.3gppnetwork.org --ims-hdomain ims.mnc001.mcc001.3gppnetwork.org --impi 001010123456790@ims.mnc001.mcc001.3gppnetwork.org --impu sip:001010123456790@ims.mnc001.mcc001.3gppnetwork.org |
Beta Was this translation helpful? Give feedback.
-
It should work on any device. On 5g router i doubt there is IMS, so just internet APN should be enough |
Beta Was this translation helpful? Give feedback.
-
|
i need to try a different APN. i am thinking MCC 234 MNC 10.. i believe it is for O2. if i configure it in .env file and then use same in mobile devices and program sims using this... will it be as stable as 001 01 that we use for testing? can you think of any issues arising |
Beta Was this translation helpful? Give feedback.
-
changing PLMN in .env and running it should get your network deployed for that PLMN and should work right out of the box. I am not sure what you mean by "as stable as 001 01" |
Beta Was this translation helpful? Give feedback.
-
|
I will try that and let you know how i get on! I do have to support a trial in an environment where 5G core server can only be accessed by one and the first gnb. Its like underground tunnel. If I attach multiple gnbs lets say 200m from each using usrp. Then will the subsequent gnbs automatically pick 5g signal from previous? I am hoping that way we can extend the range in tunnel! |
Beta Was this translation helpful? Give feedback.
-
|
I dont understand your question, what do you mean by “gnb picking up 5G signal from previous “?? |
Beta Was this translation helpful? Give feedback.
-
|
Let's picture an underground tunnel where we have a 5G core server positioned at the tunnel entrance, connected to a gNB. The challenge is to propagate the signal further down the tunnel since the first gNB will only cover a limited distance based on its line-of-sight (LOS) and range. Now, unlike conventional setups where each gNB directly connects to the 5G core, the next gNB in our tunnel scenario might be too far to establish a direct link. However, as long as any gNB remains within range of an existing 5G signal, it should still attach to the core. This suggests that if the tunnel has a continuous curve, whether left or right, placing a gNB at strategic corners where it maintains LOS with the previous gNB could effectively extend coverage. As the signal propagates further down the tunnel, each subsequent gNB essentially rebroadcasts the 5G signal, potentially creating an effect similar to amplification. This concept aligns with "base station relaying," where a secondary base station extends coverage by using the primary BS’s signal as its backhaul—essentially an integrated access and backhaul (IAB) setup. Does this approach make sense |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the explanation.
I dont think "subsequent gnbs automatically pick 5g signal" functionality is there in any of the gNB software you run using B210 |
Beta Was this translation helpful? Give feedback.
-
|
or alternatively is it viable to use an sdr such as bladerf to acquire weak 5g then amplify either in 9361 or fpga and retransmit. And run this as embedded firmware in FPGA without a OS! can matlab 5g toolbox be of any use you think? a friend of mine has gone a license! |
Beta Was this translation helpful? Give feedback.
-
|
Sorry, I have no idea about it. |
Beta Was this translation helpful? Give feedback.
-
|
I am going to do something interesting now. I will reduce 5g frequency to see if i can get more range. My antennas do 2.5 to 2.7 ghz.. so i am thinking if i adjust downlink ARFCN and change to band 7 then i might get away at low frequency and still running 5G! cell_cfg: |
Beta Was this translation helpful? Give feedback.
-
|
In the srsRAN_Project repo you can find low latency settings to set - https://github.com/srsran/srsRAN_Project/blob/main/configs/low_latency.yml. This you can take as reference. I was able to achieve around 15ms of E2E latency with that |
Beta Was this translation helpful? Give feedback.
-
|
are you suggestig that i shall update my gnb.cfg by adding the additional lines given under gnb.yml within low_latency.yml? I am using your docker_open5gs so i dont have all the configs given in the project. so I dont believe there is gnb_rf_b200_tdd_n78_20mhz within the docker_open5gs. so not sure how we execute this command given in the link you provied ' sudo ./gnb -c gnb_rf_b200_tdd_n78_20mhz.yml -c low_latency.yml' |
Beta Was this translation helpful? Give feedback.
-
|
I would suggest copying the elements under cell_cfg of the ones in low_latency.yml (i posted link above) under cell_cfg section present in |
Beta Was this translation helpful? Give feedback.
-
|
thank you .. how did you measure the latency of 0.15ms that you achieved. are there ways to measure KPI. and what components limit latency. is it antenna, PA, duplexer, etc? |
Beta Was this translation helpful? Give feedback.
-
|
I measured latency using just a ping. Ping from UE to Core Network interface IP for example ogstun IP 192.168.100.1. Or the other way around from Core to UE. Ping gives E2E latency. Latency is mainly affected by time take from gNB to schedule PDSCH to UE and also getting an ACK for that PDSCH sent to UE. |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
I have been looking at your docker solution. when i start core services, as per your instructions, i get errors with configuration in SMF and UPF. see below, any suggestions?
Write out database with 1 new entries
Data Base Updated
Open5GS daemon v2.7.2
01/05 17:49:28.648: [app] INFO: Configuration: '/open5gs/install/etc/open5gs/smf.yaml' (../lib/app/ogs-init.c:133)
01/05 17:49:28.648: [app] INFO: File Logging: '/open5gs/install/var/log/open5gs/smf.log' (../lib/app/ogs-init.c:136)
01/05 17:49:28.714: [sock] ERROR: looks_like_ip(, (null)) failed (../lib/core/ogs-sockaddr.c:602)
01/05 17:49:28.714: [pfcp] FATAL: ogs_pfcp_subnet_add: Assertion `rv == OGS_OK' failed. (../lib/pfcp/context.c:2214)
01/05 17:49:28.714: [core] FATAL: backtrace() returned 8 addresses (../lib/core/ogs-abort.c:37)
/open5gs/install/lib/x86_64-linux-gnu/libogspfcp.so.2(ogs_pfcp_subnet_add+0x84a) [0x7a7b82b94881]
/open5gs/install/lib/x86_64-linux-gnu/libogspfcp.so.2(ogs_pfcp_context_parse_config+0x25cb) [0x7a7b82b8ca48]
./open5gs-smfd(+0xffc3) [0x557f0ebe1fc3]
./open5gs-smfd(+0xf45e) [0x557f0ebe145e]
./open5gs-smfd(+0xfd46) [0x557f0ebe1d46]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x7a7b82863083]
./open5gs-smfd(+0xf38e) [0x557f0ebe138e]
/open5gs_init.sh: line 102: 60 Aborted (core dumped) ./open5gs-smfd
Beta Was this translation helpful? Give feedback.
All reactions