Randomly populating Milky Way Satellite Galaxies #586

soumyodiptak · 2024-03-19T06:13:42Z

soumyodiptak
Mar 19, 2024

Dear Andrew,

I have just started to understand the Galacticus software. I am trying from scratch to populate MW satellites randomly by using Galacticus for LambdaCDM model. I am getting errors. I have shared my code and the error below. Can you please check and guide me? I tried to make the code very simple so that I can understand it first.

<!-- Galaxy Formation Physics -->
<parameters>
    <model type="diskInstability">
        <parameter name="diskInstabilityToft2002Frac" value="0.05"/> <!-- Fraction of mass in stars formed from disk instabilities -->
    </model>
</parameters>

<!-- Milky Way-like Central Galaxy Model -->
<galaxies>
    <galaxy>
        <position value="0.0, 0.0, 0.0"/> <!-- Position of the central galaxy -->
        <mass value="1.0e12"/> <!-- Mass of the central galaxy in solar masses -->
    </galaxy>
</galaxies>

<!-- Satellite Galaxy Formation Model -->
<satellites>
    <model type="subhaloAbundanceMatching">
        <parameter name="stellarMassFunction" value="Baldry2012"/> <!-- Stellar mass function to use -->
    </model>
</satellites>

<!-- Random Population of Satellite Galaxies -->
<satellitePopulation>
    <randomPopulation>
        <numberOfSatellites value="100"/> <!-- Number of satellite galaxies to generate -->
 
8000
   </randomPopulation>
</satellitePopulation>

<!-- Orbital Parameters for Satellite Galaxies -->
<satelliteOrbits>
    <!-- Satellite 1 -->
    <orbit>
        <mass value="1.0e10"/> <!-- Mass of Satellite 1 in solar masses -->
        <radius value="200.0"/> <!-- Orbital radius of Satellite 1 in kiloparsecs (kpc) -->
    </orbit>
    <!-- Satellite 2 -->
    <orbit>
        <mass value="5.0e9"/> <!-- Mass of Satellite 2 in solar masses -->
        <radius value="250.0"/> <!-- Orbital radius of Satellite 2 in kiloparsecs (kpc) -->
    </orbit>
</satelliteOrbits>

<!-- Halo Mass Function -->
<darkMatter>
    <haloMassFunction>
        <model type="Tinker2008"/> <!-- Halo mass function model -->
        <file>./static/darkMatter/Halo_Mass_Function_Parameters_Tinker_2008.xml</file> <!-- Path to the data file for halo mass function parameters -->    
    </haloMassFunction>
</darkMatter>

<!-- Dark Matter Density Profile -->
<darkMatter>
    <haloDensityProfile>
        <model type="NFW"/> <!-- Dark matter density profile model -->
    </haloDensityProfile>
</darkMatter>

<!-- Galaxy-Halo Connection Model -->
<galaxyHaloConnection>
    <model type="Behroozi2013"/> <!-- Galaxy-halo connection model -->
</galaxyHaloConnection>

<!-- Tidal Effects -->
<tidalEffects>
     <model type="satelliteTidalEffects"/> <!-- Tidal effects model on satellite galaxies -->
</tidalEffects>

<!-- Simulation Settings -->
<simulation>
    <boxSize value="50.0"/> <!-- Size of the simulation volume in Mpc/h -->
    <outputRedshifts>
        <outputRedshift value="0.0"/> <!-- Output redshifts -->
        <outputRedshift value="1.0"/>
    </outputRedshifts>
    <outputFormat>
        <outputFormat type="HDF5"/> <!-- Output format -->
    </outputFormat>
    <outputPrefix value="MW_Satellite_Galaxies_"/> <!-- Prefix for output files -->
</simulation>

I am getting the following error:

Fatal error:
orbit masses and radius must be specified
Occurred at:
function:Kepler_Orbits_Velocity_Scale
module:Kepler_Orbits
file:objects.kepler_orbits.F90 [line 920]

Best regards,
Soumyodipta Karmakar

abensonca · 2024-03-19T15:38:30Z

abensonca
Mar 19, 2024
Maintainer

Hi Soumyodipta. Your parameter file doesn't follow the syntax that Galacticus expects. All parameters in the file will be of the form:

<name value="xyz"/>

where name is the parameter name, and xyz is the value that the parameter should take.

Also, many of your parameters are not things that are defined in Galacticus. For example, galaxyHaloConnection simply isn't a thing that exists in Galacticus, and constructions like:

<darkMatter>
    <haloDensityProfile>
        <model type="NFW"/> <!-- Dark matter density profile model -->
    </haloDensityProfile>
</darkMatter>

will not work because both darkMatter and haloDensityProfile are not entities that are defined in Galacticus.

Can you explain how you created this parameter file? Were you working from an example? Currently, it's just not in a form that Galacticus can understand so I'm not able to give much guidance on what you need to do to build a working model - I would first need to understand what it is that you're trying to achieve.

0 replies

soumyodiptak · 2024-03-19T15:57:31Z

soumyodiptak
Mar 19, 2024
Author

Dear Andrew,

Since I am a beginner on this, I am trying to understand by trial and error. My goal is to write a code to simulate MW satellite population along with their features based on LambdaCDM model.

0 replies

abensonca · 2024-03-19T16:21:39Z

abensonca
Mar 19, 2024
Maintainer

Hi Soumyodipta. I'd recommend starting from an existing example in that case - setting up a complete model for galaxy formation is very non-trivial. Here's an example that you could start with:

<?xml version="1.0" encoding="UTF-8"?>
<!-- Parameters of a Milky Way model. -->
<parameters>
  <formatVersion>2</formatVersion>
  <version>0.9.4</version>

  <!-- Include required parameters -->
  <xi:include href="parameters/reference/darkMatterParticleCDM.xml"       xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/cosmology.xml"                   xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/powerSpectrum.xml"               xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/structureFormation.xml"          xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/darkMatterHalosProfile.xml"      xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/darkMatterHalosTidalHeating.xml" xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/darkMatterHalosStructure.xml"    xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/subhaloOrbits.xml"               xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/mergerTrees.xml"                 xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>
  <xi:include href="parameters/reference/evolutionGalaxyFormation.xml"    xpointer="xpointer(parameters/*)" xmlns:xi="http://www.w3.org/2001/XInclude"/>

  <!-- Set verbosity to standard level. -->
  <verbosityLevel value="standard"/>

  <!-- Set up the tasks to perform. -->
  <task value="evolveForests">
    <!-- Evolve merger tree forests. -->
  </task>

  <!-- Merger tree building options -->
  <mergerTreeBuildMasses value="fixedMass">
    <!-- Halo masses fixed at a single value. -->
    <!-- The value used is the median estimate at r=262kpc from Slizewski et al. (2022; https://ui.adsabs.harvard.edu/abs/2022ApJ...924..131S) -->
    <massTree   value="1.520e12"/>
    <radiusTree value="0.262e00"/>
    <treeCount  value="1"       />
  </mergerTreeBuildMasses>

  <!-- Halo mass resolution -->
  <mergerTreeMassResolution value="fixed">
    <!-- All trees are set to have the same halo mass resolution. -->
    <!-- A relatively coarse mass resolution is used to allow the model to run in reasonable time. -->
    <massResolution value="8.0e7"/>
  </mergerTreeMassResolution>

  <!-- Output epochs -->
  <outputTimes value="list">
    <!-- Additional redshifts can be added to this list to generate more outputs. -->
    <redshifts value="0.0"/>
  </outputTimes>

  <!-- Output -->
  <mergerTreeOutputter value="standard"/>

  <!-- Output file -->
  <outputFileName value="milkyWay.hdf5"/>

</parameters>

This will run a single MW merger tree and output results at $z=0$.

Note that it has a relatively coarse resolution of 8 x 10⁷ M☉. A resolution of 10⁷ M☉ would be better but will take longer to run.

Note that this parameter file should be placed in the main Galacticus folder as it needs to read other parameter files located in parameters/reference/.

This model is the one published in Ahvazi et al. (2024).

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Randomly populating Milky Way Satellite Galaxies #586

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Replies: 3 comments

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Select a reply

Uh oh!

Randomly populating Milky Way Satellite Galaxies #586

Uh oh!

Uh oh!

soumyodiptak Mar 19, 2024

Replies: 3 comments

Uh oh!

abensonca Mar 19, 2024 Maintainer

Uh oh!

soumyodiptak Mar 19, 2024 Author

Uh oh!

abensonca Mar 19, 2024 Maintainer

soumyodiptak
Mar 19, 2024

abensonca
Mar 19, 2024
Maintainer

soumyodiptak
Mar 19, 2024
Author

abensonca
Mar 19, 2024
Maintainer