Differential-algebraic system of equations

This article's lead section may be too long. Please read the length guidelines and help move details into the article's body. (March 2023)

Differential equations
Scope
Fields Natural sciences Engineering Astronomy Physics Chemistry Biology Geology Applied mathematics Continuum mechanics Chaos theory Dynamical systems Social sciences Economics Population dynamics List of named differential equations
Classification
Types Ordinary Partial Differential-algebraic Integro-differential Fractional Linear Non-linear By variable type Dependent and independent variables Autonomous Coupled / Decoupled Exact Homogeneous / Nonhomogeneous Features Order Operator Notation
Relation to processes Difference (discrete analogue) Stochastic Stochastic partial Delay
Solution
Existence and uniqueness Picard–Lindelöf theorem Peano existence theorem Carathéodory's existence theorem Cauchy–Kowalevski theorem
General topics Initial conditions Boundary values Dirichlet Neumann Robin Cauchy problem Wronskian Phase portrait Lyapunov / Asymptotic / Exponential stability Rate of convergence Series / Integral solutions Numerical integration Dirac delta function
Solution methods Inspection Method of characteristics Euler Exponential response formula Finite difference (Crank–Nicolson) Finite element Infinite element Finite volume Galerkin Petrov–Galerkin Green's function Integrating factor Integral transforms Perturbation theory Runge–Kutta Separation of variables Undetermined coefficients Variation of parameters
People
List Isaac Newton Gottfried Leibniz Jacob Bernoulli Leonhard Euler Joseph-Louis Lagrange Józef Maria Hoene-Wroński Joseph Fourier Augustin-Louis Cauchy George Green Carl David Tolmé Runge Martin Kutta Rudolf Lipschitz Ernst Lindelöf Émile Picard Phyllis Nicolson John Crank
v t e

In mathematics, a differential-algebraic system of equations (DAE) is a system of equations that either contains differential equations and algebraic equations, or is equivalent to such a system.

The set of the solutions of such a system is a differential algebraic variety, and corresponds to an ideal in a differential algebra of differential polynomials.

In the univariate case, a DAE in the variable t can be written as a single equation of the form

${\displaystyle F({\dot {x}},x,t)=0,}$

where ${\displaystyle x(t)}$ is a vector of unknown functions and the overdot denotes the time derivative, i.e., ${\displaystyle {\dot {x}}={\frac {dx}{dt}}}$.

They are distinct from ordinary differential equation (ODE) in that a DAE is not completely solvable for the derivatives of all components of the function x because these may not all appear (i.e. some equations are algebraic); technically the distinction between an implicit ODE system [that may be rendered explicit] and a DAE system is that the Jacobian matrix ${\displaystyle {\frac {\partial F({\dot {x}},x,t)}{\partial {\dot {x}}}}}$ is a singular matrix for a DAE system.^[1] This distinction between ODEs and DAEs is made because DAEs have different characteristics and are generally more difficult to solve.^[2]

In practical terms, the distinction between DAEs and ODEs is often that the solution of a DAE system depends on the derivatives of the input signal and not just the signal itself as in the case of ODEs;^[3] this issue is commonly encountered in nonlinear systems with hysteresis,^[4] such as the Schmitt trigger.^[5]

This difference is more clearly visible if the system may be rewritten so that instead of x we consider a pair ${\displaystyle (x,y)}$ of vectors of dependent variables and the DAE has the form

${\displaystyle {\begin{aligned}{\dot {x}}(t)&=f(x(t),y(t),t),\\0&=g(x(t),y(t),t).\end{aligned}}}$

where ${\displaystyle x(t)\in \mathbb {R} ^{n}}$, ${\displaystyle y(t)\in \mathbb {R} ^{m}}$, ${\displaystyle f:\mathbb {R} ^{n+m+1}\to \mathbb {R} ^{n}}$ and ${\displaystyle g:\mathbb {R} ^{n+m+1}\to \mathbb {R} ^{m}.}$

A DAE system of this form is called semi-explicit.^[1] Every solution of the second half g of the equation defines a unique direction for x via the first half f of the equations, while the direction for y is arbitrary. But not every point (x,y,t) is a solution of g. The variables in x and the first half f of the equations get the attribute differential. The components of y and the second half g of the equations are called the algebraic variables or equations of the system. [The term algebraic in the context of DAEs only means free of derivatives and is not related to (abstract) algebra.]

The solution of a DAE consists of two parts, first the search for consistent initial values and second the computation of a trajectory. To find consistent initial values it is often necessary to consider the derivatives of some of the component functions of the DAE. The highest order of a derivative that is necessary for this process is called the differentiation index. The equations derived in computing the index and consistent initial values may also be of use in the computation of the trajectory. A semi-explicit DAE system can be converted to an implicit one by decreasing the differentiation index by one, and vice versa.^[6]

The distinction of DAEs to ODEs becomes apparent if some of the dependent variables occur without their derivatives. The vector of dependent variables may then be written as pair ${\displaystyle (x,y)}$ and the system of differential equations of the DAE appears in the form

${\displaystyle F\left({\dot {x}},x,y,t\right)=0}$

where

• ${\displaystyle x}$, a vector in ${\displaystyle \mathbb {R} ^{n}}$, are dependent variables for which derivatives are present (differential variables),
• ${\displaystyle y}$, a vector in ${\displaystyle \mathbb {R} ^{m}}$, are dependent variables for which no derivatives are present (algebraic variables),
• ${\displaystyle t}$, a scalar (usually time) is an independent variable.
• ${\displaystyle F}$ is a vector of ${\displaystyle n+m}$ functions that involve subsets of these ${\displaystyle n+m+1}$ variables and ${\displaystyle n}$ derivatives.

As a whole, the set of DAEs is a function

${\displaystyle F:\mathbb {R} ^{(2n+m+1)}\to \mathbb {R} ^{(n+m)}.}$

Initial conditions must be a solution of the system of equations of the form

${\displaystyle F\left({\dot {x}}(t_{0}),\,x(t_{0}),y(t_{0}),t_{0}\right)=0.}$

The behaviour of a pendulum of length L with center in (0,0) in Cartesian coordinates (x,y) is described by the Euler–Lagrange equations

${\displaystyle {\begin{aligned}{\dot {x}}&=u,&{\dot {y}}&=v,\\{\dot {u}}&=\lambda x,&{\dot {v}}&=\lambda y-g,\\x^{2}+y^{2}&=L^{2},\end{aligned}}}$

where ${\displaystyle \lambda }$ is a Lagrange multiplier. The momentum variables u and v should be constrained by the law of conservation of energy and their direction should point along the circle. Neither condition is explicit in those equations. Differentiation of the last equation leads to

${\displaystyle {\begin{aligned}&&{\dot {x}}\,x+{\dot {y}}\,y&=0\\\Rightarrow &&u\,x+v\,y&=0,\end{aligned}}}$

restricting the direction of motion to the tangent of the circle. The next derivative of this equation implies

${\displaystyle {\begin{aligned}&&{\dot {u}}\,x+{\dot {v}}\,y+u\,{\dot {x}}+v\,{\dot {y}}&=0,\\\Rightarrow &&\lambda (x^{2}+y^{2})-gy+u^{2}+v^{2}&=0,\\\Rightarrow &&L^{2}\,\lambda -gy+u^{2}+v^{2}&=0,\end{aligned}}}$

and the derivative of that last identity simplifies to ${\displaystyle L^{2}{\dot {\lambda }}-3gv=0}$ which implies the conservation of energy since after integration the constant ${\displaystyle E={\tfrac {3}{2}}gy-{\tfrac {1}{2}}L^{2}\lambda ={\frac {1}{2}}(u^{2}+v^{2})+gy}$ is the sum of kinetic and potential energy.

To obtain unique derivative values for all dependent variables the last equation was three times differentiated. This gives a differentiation index of 3, which is typical for constrained mechanical systems.

If initial values ${\displaystyle (x_{0},u_{0})}$ and a sign for y are given, the other variables are determined via ${\displaystyle y=\pm {\sqrt {L^{2}-x^{2}}}}$, and if ${\displaystyle y\neq 0}$ then ${\displaystyle v=-ux/y}$ and ${\displaystyle \lambda =(gy-u^{2}-v^{2})/L^{2}}$. To proceed to the next point it is sufficient to get the derivatives of x and u, that is, the system to solve is now

${\displaystyle {\begin{aligned}{\dot {x}}&=u,\\{\dot {u}}&=\lambda x,\\[0.3em]0&=x^{2}+y^{2}-L^{2},\\0&=ux+vy,\\0&=u^{2}-gy+v^{2}+L^{2}\,\lambda .\end{aligned}}}$

This is a semi-explicit DAE of index 1. Another set of similar equations may be obtained starting from ${\displaystyle (y_{0},v_{0})}$ and a sign for x.

DAEs also naturally occur in the modelling of circuits with non-linear devices. Modified nodal analysis employing DAEs is used for example in the ubiquitous SPICE family of numeric circuit simulators.^[7] Similarly, Fraunhofer's Analog Insydes Mathematica package can be used to derive DAEs from a netlist and then simplify or even solve the equations symbolically in some cases.^[8][9] It is worth noting that the index of a DAE (of a circuit) can be made arbitrarily high by cascading/coupling via capacitors operational amplifiers with positive feedback.^[4]

DAE of the form

${\displaystyle {\begin{aligned}{\dot {x}}&=f(x,y,t),\\0&=g(x,y,t).\end{aligned}}}$

are called semi-explicit. The index-1 property requires that g is solvable for y. In other words, the differentiation index is 1 if by differentiation of the algebraic equations for t an implicit ODE system results,

${\displaystyle {\begin{aligned}{\dot {x}}&=f(x,y,t)\\0&=\partial _{x}g(x,y,t){\dot {x}}+\partial _{y}g(x,y,t){\dot {y}}+\partial _{t}g(x,y,t),\end{aligned}}}$

which is solvable for ${\displaystyle ({\dot {x}},\,{\dot {y}})}$ if ${\displaystyle \det \left(\partial _{y}g(x,y,t)\right)\neq 0.}$

Every sufficiently smooth DAE is almost everywhere reducible to this semi-explicit index-1 form.

Two major problems in solving DAEs are index reduction and consistent initial conditions. Most numerical solvers require ordinary differential equations and algebraic equations of the form

${\displaystyle {\begin{aligned}{\frac {dx}{dt}}&=f\left(x,y,t\right),\\0&=g\left(x,y,t\right).\end{aligned}}}$

It is a non-trivial task to convert arbitrary DAE systems into ODEs for solution by pure ODE solvers. Techniques which can be employed include Pantelides algorithm and dummy derivative index reduction method. Alternatively, a direct solution of high-index DAEs with inconsistent initial conditions is also possible. This solution approach involves a transformation of the derivative elements through orthogonal collocation on finite elements or direct transcription into algebraic expressions. This allows DAEs of any index to be solved without rearrangement in the open equation form

${\displaystyle {\begin{aligned}0&=f\left({\frac {dx}{dt}},x,y,t\right),\\0&=g\left(x,y,t\right).\end{aligned}}}$

Once the model has been converted to algebraic equation form, it is solvable by large-scale nonlinear programming solvers (see APMonitor).

This section needs expansion. You can help by adding to it. (December 2014)

Several measures of DAEs tractability in terms of numerical methods have developed, such as differentiation index, perturbation index, tractability index, geometric index, and the Kronecker index.^[10][11]

We use the ${\displaystyle \Sigma }$-method to analyze a DAE. We construct for the DAE a signature matrix ${\displaystyle \Sigma =(\sigma _{i,j})}$, where each row corresponds to each equation ${\displaystyle f_{i}}$ and each column corresponds to each variable ${\displaystyle x_{j}}$. The entry in position ${\displaystyle (i,j)}$ is ${\displaystyle \sigma _{i,j}}$, which denotes the highest order of derivative to which ${\displaystyle x_{j}}$ occurs in ${\displaystyle f_{i}}$, or ${\displaystyle -\infty }$ if ${\displaystyle x_{j}}$ does not occur in ${\displaystyle f_{i}}$.

For the pendulum DAE above, the variables are ${\displaystyle (x_{1},x_{2},x_{3},x_{4},x_{5})=(x,y,u,v,\lambda )}$. The corresponding signature matrix is

${\displaystyle \Sigma ={\begin{bmatrix}1&-&0^{\bullet }&-&-\\-&1^{\bullet }&-&0&-\\0&-&1&-&0^{\bullet }\\-&0&-&1^{\bullet }&0\\0^{\bullet }&0&-&-&-\end{bmatrix}}}$

• Algebraic differential equation, a different concept despite the similar name
• Delay differential equation
• Partial differential algebraic equation
• Modelica Language

• http://www.scholarpedia.org/article/Differential-algebraic_equations