Monochloramine

Monochloramine

Names
Other names Chloramine Chloramide[1]
Identifiers
CAS Number	10599-90-3 Y
3D model (JSmol)	Interactive image
ChEBI	CHEBI:82415
ChEMBL	ChEMBL1162370 Y
ChemSpider	23735 Y
ECHA InfoCard	100.031.095
EC Number	234-217-9
KEGG	C19359 Y
MeSH	chloramine
PubChem CID	25423
UNII	KW8K411A1P
UN number	3093
CompTox Dashboard (EPA)	DTXSID8023842
InChI InChI=1S/ClH2N/c1-2/h2H2 N Key: QDHHCQZDFGDHMP-UHFFFAOYSA-N N
SMILES NCl
Properties
Chemical formula	NH 2Cl
Molar mass	51.476 g mol−1
Appearance	Colorless gas
Melting point	−66 °C (−87 °F; 207 K)
Acidity (pKa)	14
Basicity (pKb)	15
Hazards
Occupational safety and health (OHS/OSH):
Main hazards	Corrosive acid
Ingestion hazards	Corrosive; nausea and vomiting
Inhalation hazards	Corrosive
Eye hazards	Irritation
Skin hazards	Irritation
GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H290, H314, H315, H319, H335, H372, H412
Precautionary statements	P234, P260, P261, P264, P270, P271, P273, P280, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P314, P321, P332+P313, P337+P313, P362, P363, P390, P403+P233, P404, P405, P501
NFPA 704 (fire diamond)	[2] 3 1 1 ACID
Lethal dose or concentration (LD, LC):
LD50 (median dose)	935 mg/kg (rat, oral)[2]
Related compounds
Related compounds	Ammonia Dichloramine Nitrogen trichloride Fluoroamine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references

Monochloramine, often called chloramine, is the chemical compound with the formula NH₂Cl. Together with dichloramine (NHCl₂) and nitrogen trichloride (NCl₃), it is one of the three chloramines of ammonia.^[3] It is a colorless liquid at its melting point of −66 °C (−87 °F), but it is usually handled as a dilute aqueous solution, in which form it is sometimes used as a disinfectant. Chloramine is too unstable to have its boiling point measured.^[4]

Chloramine is used as a disinfectant for water. It is less aggressive than chlorine and more stable against light than hypochlorites.^[5]

Chloramine is commonly used in low concentrations as a secondary disinfectant in municipal water distribution systems as an alternative to chlorination. This application is increasing. Chlorine (referred to in water treatment as free chlorine) is being displaced by chloramine—to be specific, monochloramine—which is much less reactive and does not dissipate as rapidly as free chlorine. Chloramine also has a much lower, but still active, tendency than free chlorine to convert organic materials into chlorocarbons such as chloroform and carbon tetrachloride. Such compounds have been identified as carcinogens and in 1979 the United States Environmental Protection Agency (EPA) began regulating their levels in US drinking water.^[6]

Some of the unregulated byproducts may possibly pose greater health risks than the regulated chemicals.^{[7][clarification needed]}

Due to its acidic nature, adding chloramine to the water supply may increase exposure to lead in drinking water, especially in areas with older housing; this exposure can result in increased lead levels in the bloodstream, which may pose a significant health risk. Fortunately, water treatment plants can add caustic chemicals at the plant which have the dual purpose of reducing the corrosivity of the water, and stabilizing the disinfectant.^[8]

In swimming pools, chloramines are formed by the reaction of free chlorine with amine groups present in organic substances, mainly those biological in origin (e.g., urea in sweat and urine). Chloramines, compared to free chlorine, are both less effective as a sanitizer and, if not managed correctly, more irritating to the eyes of swimmers. Chloramines are responsible for the distinctive "chlorine" smell of swimming pools, which is often misattributed to elemental chlorine by the public.^[9][10] Some pool test kits designed for use by homeowners do not distinguish free chlorine and chloramines, which can be misleading and lead to non-optimal levels of chloramines in the pool water.^[11] There is also evidence that exposure to chloramine can contribute to respiratory problems, including asthma, among swimmers.^[12] Respiratory problems related to chloramine exposure are common and prevalent among competitive swimmers.^[13]

Though chloramine's distinctive smell has been described by some as pleasant and even nostalgic,^[14] its formation in pool water as a result of bodily fluids being exposed to chlorine can be minimised by encouraging showering and other hygiene methods prior to entering the pool,^[15] as well as refraining from swimming while suffering from digestive illnesses and taking breaks to use the bathroom, instead of simply urinating in the pool.^[16][17]

US EPA drinking water quality standards limit chloramine concentration for public water systems to 4 parts per million (ppm) based on a running annual average of all samples in the distribution system. In order to meet EPA-regulated limits on halogenated disinfection by-products, many utilities are switching from chlorination to chloramination. While chloramination produces fewer regulated total halogenated disinfection by-products, it can produce greater concentrations of unregulated iodinated disinfection byproducts and N-nitrosodimethylamine.^[18][19] Both iodinated disinfection by-products and N-nitrosodimethylamine have been shown to be genotoxic, causing damage to the genetic information within a cell resulting in mutations which may lead to cancer.^[19]

Another newly-identified byproduct of chloramine is chloronitramide anions, whose toxicity has not yet been determined.^[20]

In the year 2000, Washington, DC, switched from chlorine to monochloramine, causing lead to leach from unreplaced pipes. The number of babies with elevated blood lead levels rose about tenfold, and by one estimate fetal deaths rose between 32% and 63%.^[21]

Trenton, Missouri made the same switch, causing about one quarter of tested households to exceed EPA drinking water lead limits in the period from 2017 to 2019. 20 children tested positive for lead poisoning in 2016 alone.^[21] In 2023, Virginia Tech Professor Marc Edwards said lead spikes occur in several water utility system switchovers per year, due to lack of sufficient training and lack of removal of lead pipes.^[21] Lack of utility awareness that lead pipes are still in use is also part of the problem; the EPA has required all water utilities in the United States to prepare a complete lead pipe inventory by October 16, 2024.^[22]

Chloramine is a highly unstable compound in concentrated form. Pure chloramine decomposes violently above −40 °C (−40 °F).^[23] Gaseous chloramine at low pressures and low concentrations of chloramine in aqueous solution are thermally slightly more stable. Chloramine is readily soluble in water and ether, but less soluble in chloroform and carbon tetrachloride.^[5]

In dilute aqueous solution, chloramine is prepared by the reaction of ammonia with sodium hypochlorite:^[5]

NH₃ + NaOCl → NH₂Cl + NaOH

This reaction is also the first step of the Olin Raschig process for hydrazine synthesis. The reaction has to be carried out in a slightly alkaline medium (pH 8.5–11). The acting chlorinating agent in this reaction is hypochlorous acid (HOCl), which has to be generated by protonation of hypochlorite, and then reacts in a nucleophilic substitution of the hydroxyl against the amino group. The reaction occurs quickest at around pH 8. At higher pH values the concentration of hypochlorous acid is lower, at lower pH values ammonia is protonated to form ammonium ions (NH⁺
₄), which do not react further.

The chloramine solution can be concentrated by vacuum distillation and by passing the vapor through potassium carbonate which absorbs the water. Chloramine can be extracted with ether.

Gaseous chloramine can be obtained from the reaction of gaseous ammonia with chlorine gas (diluted with nitrogen gas):

2 NH₃ + Cl₂ ⇌ NH₂Cl + NH₄Cl

Pure chloramine can be prepared by passing fluoroamine through calcium chloride:

2 NH₂F + CaCl₂ → 2 NH₂Cl + CaF₂

The covalent N−Cl bonds of chloramines are readily hydrolyzed with release of hypochlorous acid:^[24]

RR′NCl + H₂O ⇌ RR′NH + HOCl

The quantitative hydrolysis constant (K value) is used to express the bactericidal power of chloramines, which depends on their generating hypochlorous acid in water. It is expressed by the equation below, and is generally in the range 10⁻⁴ to 10⁻¹⁰ (2.8×10⁻¹⁰ for monochloramine):

${\displaystyle K={\frac {c_{{\text{RR}}'{\text{NH}}}\cdot c_{\text{HOCl}}}{c_{{\text{RR}}'{\text{NCl}}}}}}$

In aqueous solution, chloramine slowly decomposes to dinitrogen and ammonium chloride in a neutral or mildly alkaline (pH ≤ 11) medium:

3 NH₂Cl → N₂ + NH₄Cl + 2 HCl

However, only a few percent of a 0.1 M chloramine solution in water decomposes according to the formula in several weeks. At pH values above 11, the following reaction with hydroxide ions slowly occurs:

3 NH₂Cl + 3 OH⁻ → NH₃ + N₂ + 3 Cl⁻ + 3 H₂O

In an acidic medium at pH values of around 4, chloramine disproportionates to form dichloramine, which in turn disproportionates again at pH values below 3 to form nitrogen trichloride:

2 NH₂Cl + H⁺ ⇌ NHCl₂ + NH⁺
₄

3 NHCl₂ + H⁺ ⇌ 2 NCl₃ + NH⁺
₄

At low pH values, nitrogen trichloride dominates and at pH 3–5 dichloramine dominates. These equilibria are disturbed by the irreversible decomposition of both compounds:

NHCl₂ + NCl₃ + 2 H₂O → N₂ + 3 HCl + 2 HOCl

In water, chloramine is pH-neutral. It is an oxidizing agent (acidic solution: E° = +1.48 V, in basic solution E° = +0.81 V):^[5]

NH₂Cl + 2 H⁺ + 2 e⁻ → NH⁺
₄ + Cl⁻

Reactions of chloramine include radical, nucleophilic, and electrophilic substitution of chlorine, electrophilic substitution of hydrogen, and oxidative additions.

Chloramine can, like hypochlorous acid, donate positively charged chlorine in reactions with nucleophiles (Nu⁻):

Nu⁻ + NH₃Cl⁺ → NuCl + NH₃

Examples of chlorination reactions include transformations to dichloramine and nitrogen trichloride in acidic medium, as described in the decomposition section.

Chloramine may also aminate nucleophiles (electrophilic amination):

Nu⁻ + NH₂Cl → NuNH₂ + Cl⁻

The amination of ammonia with chloramine to form hydrazine is an example of this mechanism seen in the Olin Raschig process:

NH₂Cl + NH₃ + NaOH → N₂H₄ + NaCl + H₂O

Chloramine electrophilically aminates itself in neutral and alkaline media to start its decomposition:

2 NH₂Cl → N₂H₃Cl + HCl

The chlorohydrazine (N₂H₃Cl) formed during self-decomposition is unstable and decomposes itself, which leads to the net decomposition reaction:

3 NH₂Cl → N₂ + NH₄Cl + 2 HCl

Monochloramine oxidizes sulfhydryls and disulfides in the same manner as hypochlorous acid,^[25] but only possesses 0.4% of the biocidal effect of HClO.^[26]

• Disinfection
• Disinfection by-products
• Water treatment
• Pathogen
• Chloramines

• "Chlorinated drinking water", IARC Monograph (1991)
• EPA Maximum Contaminant Levels
• WebBook page for NH₂Cl
• Chlorine and chloramines in the freshwater aquarium