[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Skip to main content
  • Research article
  • Open access
  • Published:

Sca 1, a previously undescribed paralog from autotransporter protein-encoding genes in Rickettsia species

Abstract

Background

Among the 17 genes encoding autotransporter proteins of the "surface cell antigen" (sca) family in the currently sequenced Rickettsia genomes, ompA, sca 5 (ompB) and sca 4 (gene D), have been extensively used for identification and phylogenetic purposes for Rickettsia species. However, none of these genes is present in all 20 currently validated Rickettsia species. Of the remaining 14 sca genes, sca 1 is the only gene to be present in all nine sequenced Rickettsia genomes. To estimate whether the sca 1 gene is present in all Rickettsia species and its usefulness as an identification and phylogenetic tool, we searched for sca 1genes in the four published Rickettsia genomes and amplified and sequenced this gene in the remaining 16 validated Rickettsia species.

Results

Sca 1 is the only one of the 17 rickettsial sca genes present in all 20 Rickettsia species. R. prowazekii and R. canadensis exhibit a split sca 1 gene whereas the remaining species have a complete gene. Within the sca 1 gene, we identified a 488-bp variable sequence fragment that can be amplified using a pair of conserved primers. Sequences of this fragment are specific for each Rickettsia species. The phylogenetic organization of Rickettsia species inferred from the comparison of sca 1 sequences strengthens the classification based on the housekeeping gene gltA and is similar to those obtained from the analyses of ompA, sca 5 and sca4, thus suggesting similar evolutionary constraints. We also observed that Sca1 protein sequences have evolved under a dual selection pressure: with the exception of typhus group rickettsiae, the amino-terminal part of the protein that encompasses the predicted passenger domain, has evolved under positive selection in rickettsiae. This suggests that the Sca1 protein interacts with the host. In contrast, the C-terminal portion containing the autotransporter domain has evolved under purifying selection. In addition, sca 1 is transcribed in R. conorii, and might therefore be functional in this species.

Conclusion

The sca 1 gene, encoding an autotransporter protein that evolves under dual evolution pressure, is the only sca- family gene to be conserved by all Rickettsia species. As such, it is a valuable identification target for these bacteria, especially because rickettsial isolates can be identified by amplification and sequencing of a discriminatory gene fragment using a single primer pair. It may also be used as a phylogenetic tool. However, its current functional status remains to be determined although it was found expressed in R. conorii.

Background

Members of the genus Rickettsia are obligate intracellular, Gram-negative, bacteria. These bacteria are surrounded by a crystalline proteic layer [1], also referred to as S-layer, which represents 10 to 15 % of their total protein mass [2] and is made of immunodominant surface protein antigens (SPA) [3–5]. Prior to Rickettsia genome sequencing, two SPAs, i.e. rOmpA [6, 7] and rOmpB [8, 9], were identified in Rickettsia species. These two high molecular weight proteins are major antigenic determinants eliciting an early and dominant immune response in patients infected with rickettsiae [10]. Recent studies suggested that these two proteins are involved in adhesion to host cells [11, 12]. This assumption is supported by the presence of conserved repeated peptide motifs which are common in some adhesive proteins from other species [13].

rOmpA and rOmpB are encoded by the omp A [14] and sca 5 (or omp B) [15] genes, respectively. Sequence analyses readily identify the presence of a highly conserved autotransporter β-barrel domain (hereafter designated as "autotransporter domain") at the C-termini of the protein products. Proteins carrying this domain are collectively designated as "autotransporter proteins", and have been described in many Gram-negative bacteria [16]. The autotransporter domain forms a β-barrel pore in the bacterial outer membrane, and allows the amino-terminal part ("passenger domain") of the precursor to be exported across the outer membrane of the bacterium, and later be released following cleavage of the autotransporter domain. Theoretical molecular masses of the predicted proteins derived from omp A and omp B genes exceed those experimentally measured for rOmpA and rOmpB, respectively [3, 4, 9, 17], implying the cleavage of the autotransporter domain from their precursors. Indeed, such a post-translational processing was demonstrated for rOmpB for which a ≈30-kDa peptide is cleaved from the C-terminus of the protein [3, 4, 9, 17, 18]. Another gene, annotated as sca 4 (surface cell antigen 4), previously named gene D [19] and known to encode a 120-kDa intracytoplasmic protein, has a passenger domain similar to those of ompA and ompB. However, it lacks the autotransporter domain [18].

Based on the sequences of nine Rickettsia genomes, we have recently identified another 14 autotransporter genes exhibiting structures similar to those of ompA and ompB [18]. Members of the paralogous sca gene family are diversely degraded and distributed among Rickettsia species, with numbers of complete genes ranging from two in R. prowazekii to 10 in R. felis [18]. Among the 17 sca genes, only three are present in all nine Rickettsia genomes, i.e., sca 1, sca 4, and sca 5 (ompB). However, we have previously demonstrated that sca 5 was not amplified in R. canadensis [15] and that sca 4 was fragmented in R. prowazekii and not amplifiable in R. canadensis [19]. As a consequence, none of the previously studied sca genes, despite their demonstrated usefulness for identification of these bacteria, may serve to identify all rickettsial isolates. Likewise, no current phylogenetic study based on sca genes included all Rickettsia species.

Of the 17 rickettsial autotransporter proteins putatively encoded by the 17 sca genes, only rOmpA and rOmpB have been detected by SDS-PAGE or western-blotting in R. conorii [10] as well as Sca4 in R. japonica [20]. Curiously, neither omp A nor omp B are conserved in all validated Rickettsia species, despite their seemingly important roles in adhesion to host cells [11]. No protein product has been identified yet for the other sca genes, raising the question as to whether those genes are functional. By RT-PCR, we recently observed that sca 2 was transcribed in R. conorii [21]. In this study, to further characterize the sca family of genes, we studied the sca 1 gene, the only gene together with ompB and sca 4 present in the nine Rickettsia genomes [18]. By comparing sca 1 gene sequences from all 20 validated Rickettsia species, we performed a phylogenetic analysis of Rickettsia species and analyzed more precisely the evolutionary forces that acted on sca 1. In addition, as ompB and sca 4 are expressed, we also examined the transcriptional status of the sca 1 gene in R. conorii.

Results

Sca 1 sequences

Orthologous genes of the R. conorii sca 1 gene in the genomes of R. prowazekii, R. typhi, and R. felis, were readily identified with the use of BLASTn, tBLASTn, and BLASTp homology searches. In R. prowazekii, the sca 1 gene was split into three consecutive ORFs (RP016 to RP018).

Sca 1 fragments were amplified from all tested Rickettsia species. All negative controls remained negative. The size of sca 1 genes ranged from 1,782 bp for R. bellii to 5,928 bp for R. japonica. All studied species exhibited distinct sca 1 sequences, which were deposited in GenBank under the accession numbers reported in Table 1. The global pairwise nucleotide sequence identities of sca 1 varied from 57% between R. prowazekii and R. canadensis to 99 % between R. sibirica and R. parkeri. This variation is greater than that observed for the 16 S rDNA (> 97.2%) and gltA genes (> 85 %), previously studied for all Rickettsia species [22, 23]. This variation is also greater than that observed for sca 5, which exhibits pairwise identities ranging from 70 to 99.6 % [15]. Thus sca 1 appeared to be more divergent at the nucleotide level among Rickettsia species than sca 5. The G+C% of sca 1 sequences ranged from 30.15 % for R. prowazekii to 34.68 % for R. helvetica. Differences among Rickettsia species consisted of nucleotide substitutions, insertions and deletions, but not of variations in number of repeats as observed in ompA [24]. Insertions and/or deletions were found in all studied species and varied in size and position according to the species. When translated into amino acids, sca 1 sequences were free from internal stop codons except R. prowazekii and R. canadensis. The overall pairwise amino acid sequence identities ranged from 37 % between R. canadensis and R. bellii to 97% between R. conorii and R. sibirica.

Table 1 Rickettsial strains included in this study

Using the SVARAP software, we identified a 488-bp fragment at the 3'-end of the sca 1 gene, in the autotransporter domain. With regard to the R. japonica sca 1 sequence, this fragment was located between nucleotides 4,894 and 5,930. It was flanked by conserved sequences within which it was possible to identify the primer pair F1MAX: 5'-AAGAGGTYTRTGGATGCGT-3' and RMAX: 5'-GAYAATATATTATTYTCTTTC-3'. The specificity of these primers was confirmed by comparison with sequences available in the GenBank database. Each of the 20 Rickettsia species we studied had a specific fragment sequence, with pairwise nucleotide sequence identities varying from 78.5% between R. belli and R. prowazekii to 99.8 % between R. parkeri and R. africae. Fragment sequences were deposited in GenBank under the accession numbers reported in Table 1.

Phylogenetic analysis

The phylogenetic relationships among Rickettsia species were inferred in three steps. Because the passenger domains of the Sca1 proteins could not be aligned reliably owing to a high level of divergence between distant Rickettsia species, we first reconstructed the phylogeny of the 20 species from the alignment of the autotransporter domains, which is much more conserved. The autotransporter domain alignment contained 282 amino acid sites. In this phylogenetic tree (Figure 1A), the three major recognized Rickettsia clades (spotted fever, typhus and R. bellii groups) were well separated with bootstrap value >75%. In addition, R. canadensis appeared to form a separate fourth deep branching clade. The spotted fever sub-tree was poorly resolved, with most branches having bootstrap values <75%. We realigned separately the Sca1 proteins from spotted fever group (SFG) rickettsiae, including the passenger domain, and used them for phylogenetic reconstruction. After removing gaps and ambiguous positions, the SFG alignment contained 628 amino acid sites and 16 sequences. The SFG tree (Figure 1B) was organized in three distinct clades. The first clade included R. felis, R akari, and R. australis; the second clade contained a single species, i.e., R. helvetica. The last clade contained all other SFG species, including R. conorii. This latter clade, poorly resolved, was therefore re-analysed separately. The alignment of the Sca1 proteins from the latter clade contained 12 sequences and 1,211 amino acid sites after gap removal. The resulting phylogenetic tree was entirely resolved with all branches supported with bootstrap values > 82%, except for the placement of R. honei with a boostrap support of 53% (Figure 1C). Two clusters supported by bootstrap values of 100% were observed, one including R. massiliae, R. rhipicephali, R. aeschlimannii and R. montanensis, and the other including all remaining species.

Figure 1
figure 1

Dendrogram representing phylogenetic relationships between Rickettsia species inferred from comparison of Sca1 amino acid sequences. The Neighbor-Joining phylogenetic tree was inferred with the MEGA software version 2.1. The numbers at the nodes are the proportion of 100 bootstrap resamplings that support the topology shown. The scale bar indicates a 5 % sequence divergence. 1A: phylogeny of all 20 species using an alignment of the autotransporter domain; 1B: phylogeny of spotted fever group rickettsiae inferred from the comparison of full Sca1 sequences; 1C: phylogenetic resolution of members of the R. rickettsii and R. massiliae clusters.

Study of evolutionary forces

We carried out a sliding window analysis to highlight the local variations of sequence similarity along the protein sequences. Two broad regions with different levels of sequence divergence could be distinguished (Figure 2). The first region, which encompasses the majority of the alignment (from position 1 to 800), is characterized by a higher level of sequence divergence with 50 aa window not exceeding 86% of invariable positions and dropping at values as low as 60% at positions 127–186 and 325–385 (Figure 2). The second region from position 801 to the end, overlaps with the autotransporter domain and is more conserved with 50 aa window ranging from 78% to 98% of invariable positions. This heterogeneity of sequence divergence suggests different strength of selective constraints in the different domains of the Sca1 protein.

Figure 2
figure 2

Variable selective pressure along the Sca1 sequences. The x axis represents the alignments of the Sca1 sequences. The predicted passenger and autotransporter domains expand from positions 1 to 800, and from positions 801 to the end, respectively. The N-terminal signal peptide is not included in the alignment because the sequence was not determined for some of the Rickettsia species under study. The y axis represents the percent of invariable sites per window of 50 sites attributed to each amino acid position in the Sca1 protein alignment. Predicted positively selected sites and their mean of Ï– (calculated as the average of Ï– over the 11 site classes of model M8, weighted by the posterior probabilities; right axis) appear as stars. The curve represents the averages of means of Ï– calculated for sliding windows of 50 codon sites (right axis).

To further characterize the variations of selective constraints along the Sca1 protein sequence, models of codon substitutions were fitted to the aligned Sca1 codon sequences to estimate the ω ratios (Table 3). Likelihood ratio tests were applied between nested models to select the one that best described the data (Table 4). Models M1, M2 and M3, which account for variable ω ratio among codon sites are all significantly better (P < 0.0001) than model M0, which accounts for a single ω ratio for all codon sites in the alignment. This confirms that selective constraints are not homogenous along the Sca1 sequences. In addition, model M2 (selection) significantly improved the likelihood over model M1 (neutral). Interestingly, models M2 and M3 both predicted a class of codon sites with ω > 1, suggesting that some amino acid positions are under positive selection. This result was further confirmed by the model M8, which better fit the data than model M7 and predicted an additional class of codons with ω = 5.75. Note that model M2, M3 and M8 identified the same amino acid positions under positive selection. Thus, the signal for positive selection was consistent whatever the evolutionary model considered (Table 3). The predicted positively selected sites were mainly distributed within the internal passenger domain (Figure 2) except site 1049, which fall in the AT domain. Unfortunately, little is known about the Sca1 passenger domain and no information is available on the 3-dimensional proximity of the positively selected sites. The C-terminal region encompassing the autotransporter domain was globally under stronger purifying selection (Figure 2). Models M3 and M8 predicted that 44% and 45% of codon sites respectively (mostly located in the N-terminal region) belong to codon categories with ω close to or higher than 1. This suggests that a substantial fraction of amino acid sites in the passenger domain of Sca1 proteins was under weak or positive selection. When estimating the Ka/Ks ratios by branch, we observed that the ratios were > 1 among SFG rickettsiae but < 1 between R. prowazekii and R. typhi, thus suggesting a different evolutionary pressure that acted on Sca1 in SFG and typhus group rickettsiae.

Table 3 Log-likelihood values and parameter estimates for the codon-based models of nucleotide substitutions
Table 4 Likelihood Ratio Test Statistics

RT-PCR assay

An RT-PCR product of 407-bp was obtained from R. conorii. Negative controls remained negative. The sequenced RT-PCR product was 100% identical to the sca1 sequence from R. conorii.

Discussion

We studied the sca 1 gene in the 20 currently validated Rickettsia species and demonstrated that this gene, the only sca gene present in all 20 species (Figure 3), is a useful tool for the identification and phylogenetic study of these bacteria.

Figure 3
figure 3

Current knowledge on the distribution of the ompA, sca 1, sca 2, sca 4, and sca 5 genes among the 20 validated Rickettsia species. Green dots indicate complete genes, whereas blue dots indicate split genes, yellow dots indicate gene fragments, and red dots indicate absent genes.

We obtained unique sca 1 sequences for each of the 20 studied species. We also observed that sca 1 sequences exhibit a greater level of interspecies variablity than previously studied sca genes, thus making sca 1 a potential identification tool for rickettsiae.Sca 1 loci exhibit diverse levels of conservation among Rickettsia species. It is present as a complete gene in all studied species except in R. prowazekii and R. canadensis, in which it is present as a pseudogene. Amiri et al. have previously demonstrated that the rate of gene degradation may vary among Rickettsia species, with typhus group rickettsiae exhibiting a higher rate than spotted fever group rickettsiae [25]. In our study, we observed a higher degradation gradient in typhus group (R. prowazekii but not R. typhi) than in spotted fever group rickettsiae (none of 18 species studied). We have previously observed such variations for ompA, sca 2, sca 5, and sca 4 (Figure 3). ompA is present as a pseudogene in R. felis and R. akari, as fragments in R. bellii [18], and could not be amplified in R. helvetica, R. canadensis, and typhus group rickettsiae [14]; sca 2 is present as a pseudogene in R. helvetica and R. canadensis, and as remnants in typhus group rickettsiae [21]; sca 4 was split in R. prowazekii and could not be detected in R. canadensis [19]; and sca 5 was not found in R. canadensis [15]. All other sca genes are even less conserved among Rickettsia species [18]. Thus, sca 1 is the only sca family gene to be present in all 20 validated Rickettsia species. This specificity and the length of the gene prompted us to search for a gene fragment that could serve as an identification tool for all species. We identified a 488-bp fragment within the autotransporter domain whose sequence could distinguish all Rickettsia species. This sequence fragment has the advantage of being amplified using a single primer pair (F1MAX-RMAX), and thus may be a useful tool for both detection and identification of Rickettsia species.

Due to high levels of divergence between distant Rickettsia species in their passenger domains, we based our phylogenetic analysis on a polyphasic approach. The sca 1-based phylogenetic analysis of Rickettsia species was well supported for most species (Figure 1). Four clusters were identified and supported by elevated bootstrap values: one included the Rickettsia species previously classified within the R. rickettsii group [26]; a second was made of members of the R. massiliae group; a third incorporated members of the R. akari group; and the fourth group was made of members of the typhus group. By comparison with previous phylogenetic studies based on autotransporter genes or gltA, involved in a central metabolic pathway [14, 15, 22], we obtained similar organizations among SFG rickettsiae. Obtaining similar phylogenetic reconstructions from the analyses of different genes with different functions suggests that the true phylogenetic organization of members of the Rickettsia genus is close to that obtained in our study.

By comparing sca genes among nine Rickettsia genomes, we have previously observed that five of the 17 sca genes (ompA, sca 1, sca 2, sca 4 and sca 5) have evolved under positive selection [18]. However, this analysis was global and based on a limited number of species. Herein, we conducted a detailed study using a sliding-window approach. This method showed that sca 1 is divided into two domains undergoing different selection pressure (Figure 2). The 3'-end of the gene, highly conserved among species and encoding the autotransporter domain, was found to evolve under purifying selection. This is likely due to the complex structure of the β barrel pore, which involves numerous specific interactions between amino acids. Amino acid replacements in the autotransporter domain may be more likely to be deleterious for the protein function. In contrast, the 5'-part of the gene, highly variable among species and encoding the secreted part of the protein, has evolved under weaker or neutral selection. In addition, we have shown here that some amino acid positions within the N-terminal domain have evolved under positive selection. The immune system of the host is known to drive positive Darwinian selection for diversity of immuno-exposed proteins such as the por B gene of Neisseria gonorrhoeae [27]. To date, only the rOmpA, rOmpB, and Sca4 proteins have evidence of expression and are known to induce an immune response in humans [14, 15, 20]. The functional status of the other sca genes is still uncertain. Several features of sca 1 evolution suggest that this gene is functional in most of the Rickettsia species belonging to the spotted fever group. First, if the process of degradation started before the separation of these species, we would expect the level of divergence to be homogeneous along the protein sequences. The fact that we could distinguish two regions with different levels of sequence divergence argues against the pseudogene hypothesis. In addition, the genic region corresponding to the autotransporter domain appeared to evolve mainly under purifying selection, which is characteristic of functional coding sequences. In addition, we observed that sca 1 has evolved under distinct evolutionary patterns depending on the phylogenetic branches. In typhus group rickettsiae, Sca1 has evolved under purifying selection whereas in other species, it has evolved under positive selection. Whether this is linked to a difference in vector or host is unknown.

Although sca 1, sca 4 and sca 5 are the most conserved sca genes among Rickettsia species (Figure 3), only the latter two genes are known to be expressed. Thus, we investigated the transcription of this gene, which is currently unknown. Chao et al. could not find sca 1 in the R. prowazekii proteome [28]. However, this may be explained by the fact that sca 1 is a pseudogene in this species. Using RT-PCR, we demonstrated that sca 1 was transcribed at least in R. conorii. The molecular mass of the predicted mature Sca1 protein in R. conorii being 170 kDa, which is close to that of rOmpA, it is possible that the expression of Sca1 has not been detected previously because of the lack of resolution of SDS-PAGE analyses. Future efforts will be put to determine whether the transcription of sca 1 is followed by its translation into a protein.

Conclusion

We have demonstrated that the sca 1 gene, which encodes a putative autotransporter protein, is the only sca gene present in all Rickettsia species. We identified a 488-bp variable sca 1 fragment amplifiable using a pair of conserved primers that may be used as a detection and identification tool for Rickettsia species. Phylogenetic relationships obtained from the analysis of this gene are consistent with those obtained from the analyses of other genes, thus suggesting that this gene is undergoing similar evolutionary constraints. The sca 1 gene, which is partially degraded in certain species, is undergoing a dual selection pressure and is transcribed into mRNA in R. conorii, thus suggesting that it might be functional. However, as its putative protein product has not been detected as yet, further studies should aim at determining whether it plays a role in the immune response observed in patients with rickettsioses.

Methods

Rickettsial strains

The strains used in this study are listed in Table 1. All rickettsiae were grown on Vero cell monolayers as previously described [22]. When Gimenez staining [29] showed the cells to be heavily infected, they were harvested and centrifuged at 1,200 g for 10 min, resuspended in MEM (minimum essential medium, GIBCO) and stored at -70°C until DNA extraction was performed.

PCR amplification and DNA sequencing

Sca 1 gene sequences were retrieved from the four published Rickettsia genomes, i.e., R. conorii (NC_003103), R. prowazekii (NC_000963), R. typhi (NC_006142), and R. felis (NC_007109). Primers used for amplification and sequencing are presented in Table 2. They were designed by aligning the sca 1 sequences from R. conorii and R. felis.

Table 2 Oligonucleotide primers used for PCR amplification and sequencing of rickettsial species. The position of the 5' nucleotide of each primer is numbered with respect to the sca 1 gene sequence of R. conorii.

For PCR, genomic DNA was extracted using the Chelex method as previously described [30]. PCRs were carried out in a PTC-200 automated thermal cycler (MJ Research, Waltham, MA) using the eLONGase DNA polymerase (Gibco-BRL, Gaithersburg, USA). The 25 μl reaction mixture consisted of (final concentration): primers 12.5 pmol each, MgCl2 40 mM, dNTP 5 mM each, 2.5 μl of buffer 10×, 0.5 μl eLONGase DNA polymerase, 5 μl of DNA, and sterile water to a final volume of 25 μl. PCR amplification was performed under the following conditions: a 3-min denaturation step at 94°C followed by 40 cycles of denaturation for 30 s at 94°C, annealing for 30 s at 50°C and extension for 90 s at 68°C. Holding for 7 min at 68°C to allow complete extension of the PCR products completed the amplification. PCR products were separated by electrophoresis on 1% agarose gels, visualized by staining with ethidium bromide and then purified using the QIAquick PCR purification kit (QIAGEN, Hilden, Germany) as described by the manufacturer. PCR products were sequenced twice in both directions using the d-Rhodamine Terminator Cycle Sequencing Ready Reaction kit (PE Applied Biosystems, Warrington, UK) as proposed by the manufacturer. Sequencing primers were the same as PCR primers. Sequencing products were resolved using an ABI 3100 automated sequencer (PE Applied Biosystems) following the manufacturer's instructions. For each species the sequence of both DNA strands was determined twice.

When primers failed to amplify a gene fragment, we used GenomeWalker DNA walking method. DNA was extracted using the FastDNA kit and the FastPrep instrument (Bio101, Carlsbad, CA) according to the manufacturer's instructions. Sequencing was performed using the Universal Genome Walker Kit (CLONTECH, Palo Alto, CA) as proposed by the manufacturer. When GenomeWalker failed to provide sca 1 sequences, a mini shotgun assay was performed using the Eppendorf Perfectprep Plasmid 96 Vac Direct Bind kit (Brinkmann, Westbury, NY) as described by the manufacturer.

Sequence assembly was performed using the software package ABI Prism DNA sequencing analysis software version 3.0 (PE-Applied Biosystems). Sequences were deposited in GenBank under the accession numbers detailed in Table 1.

Identification of a molecular identification target

To identify sca 1 sequence fragments variable among Rickettsia species and useable as a PCR target, we used the Sequence Variability Analysis Program (SVARAP) software [31]. This software determines the genetic diversity among sequences using a sliding window analysis, by moving a window of 50 nucleotide positions along the alignment with a step of one. We focused on fragments of a maximum size of 500-bp flanked by conserved sequences in which selection of primers was possible.

Phylogenetic reconstruction

Sca 1 nucleic and amino acid sequences were aligned using the CLUSTALW software [32]. Neighbor-Joining (NJ) and Maximum Parsimony (MP) phylogenetic reconstructions were carried out using the MEGA2 software (version 2.1) [33]. Maximum Likelihood (ML) trees were performed using the programs PROTML (MOLPHY software package) [34] and PAUP [35] for the protein and nucleotide alignments, respectively. For the NJ and ML analyses, we used the JTT model of substitutions for proteins and the TN93 model for nucleotides. Statistical support for internal branches was assessed by bootstrap sampling for MP and NJ analyses and Resampling of Estimated Log-Likelihood (RELL) for ML analyses [36].

Analysis of evolutionary forces acting on sca 1

The G+C content statistics were obtained using FREQSQ on the Infobiogen website [37].

Alignments were manually corrected to remove gapped and ambiguous positions. The sliding-window analysis was carried out by moving a window of 50 amino acid positions along the alignment with a step of one. For each window, we recorded the percentage of positions with identical residues in all sequences. The passenger domains of the Sca1 proteins were difficult to align between distant Rickettsia owing to a high level of sequence divergence. We therefore restricted our analysis to the 12 Rickettsia species presented in Figure 1C to obtain a reliable multiple alignment.

To study the selective forces acting on sca 1 proteins, we determined the ratio ω = Ka/Ks where Ka and Ks are the rates of non-synonymous and synonymous substitution accumulations, respectively. In absence of codon utilization bias, as is the case for Rickettsia genes [38], synonymous substitutions are largely free from selection (neutral) and are accumulated at a rate similar to the mutation rate. Inversely, because natural selection mainly acts on protein sequences, non-synonymous substitution accumulation is correlated with selection. If amino acid changes are neutral, non-synonymous substitutions will be fixed at the same rate as synonymous mutations and therefore ω ≈ 1. If amino acid changes are deleterious, purifying selection will reduce their fixation rate so that ω < 1. Finally, when amino acid changes offer a selective advantage, they will be fixed at a higher rate than synonymous substitutions by positive Darwinian selection, with ω > 1. We analysed the aligned nucleotide sequences using six-codon-based models described by Yang et al. [39]. These models explore whether, given a phylogenetic tree and a codon sequence alignment, variable selective constraints among amino acid sites (ω) are present. Model M0 assumes a single ω ratio estimated for the whole alignment. Model M1 (neutral) assumes two categories of sites in the protein: the conserved sites (w = 0) and the neutral sites (w = 1) and the proportion of sites distributed in the two classes (p0 and p1 = 1 - p0) are to be estimated from the data. Model M2 (selection) adds a third class of sites, with w2 freely estimated. Model M3 assumes 3 categories of sites with corresponding ω and proportion (p). Finally model M7 and M8 assume that ω ratios are distributed among sites according to a beta, which, depending on parameters p and q, can take different shapes in the interval (0,1). M7 does not allow for positively selected sites, whereas M8 can, by allowing an additional category of site with ω as free parameter. The ω ratio and the proportion of sites were estimated for each codon category by the maximum likelihood approach implemented in the codeml program from the paml package [40]. We used the topology presented in Figure 1C as input tree for codeml. The goodness of fit of two nested models can be compared using the likelihood ratio test: twice the log-likelihood difference between the two models (2ΔlnL = 2 × [lnL1 - lnL0]) can be compared to a χ2 distribution, with the number of degrees of freedom equal to the difference in the number of free parameters between the two models. Then, to determine whether evolutionary forces acted differently on the different Rickettsia species, we compared the Ka/Ks ratios for the different branches in Figure 1A.

RT-PCR assay

In an effort to determine whether sca 1 was transcribed into mRNA, we extracted RNA from R. conorii using the Rneasy Mini kit (QIAGEN, Hilden, Germany). A one-step RT-PCR was performed using the Superscript one-step with Platinum Taq (Gibco-Brl). Within a final volume of 25 μl, we incorporated 2 μl of template RNA, 0.7 μl RT polymerase, 12.5 2-X reaction buffer, 1 μl of each of the primers s1.conoF1 and s1.conoR1 (Table 2), and 7.8 RNAse-free distilled water. On a PTC-200 thermal cycler (MJ Research), cDNA synthesis was performed by a 30-min step at 50°C, followed by a step at 95°C. Then, PCR amplification was conducted using 40 cycles made of a denaturation step at 95°C for 30 sec, an annealing step at 50°C for 30 sec, and an elongation step at 72°C for 1 min. The amplification was completed by a final 7-min elongation at 72°C. RT-PCR products were resolved on a 1% agarose gel as described above. RT-PCR products were sequenced as described above using RT-PCR primers. Distilled sterile water, processed as described above, was used as negative control. In addition, PCR performed as described above using RT-PCR primers was performed on the RNA extract to detect the presence of contaminant DNA.

References

  1. Palmer EL, Martin ML, Mallavia L: Ultrastucture of the surface of Rickettsia prowazeki and Rickettsia akari. Appl Microbiol. 1974, 28: 713-716.

    PubMed Central  CAS  PubMed  Google Scholar 

  2. Ching WM, Wang H, Jan B, Dasch GA: Identification and characterization of epitopes on the 120- kilodalton surface protein antigen of Rickettsiaprowazekii with synthetic peptides. Infect Immun. 1996, 64: 1413-1419.

    PubMed Central  CAS  PubMed  Google Scholar 

  3. Ching WM, Carl M, Dasch GA: Mapping of monoclonal antibody binding sites on CNBr fragments of the S- layerprotein antigens of Rickettsia typhi and Rickettsia prowazekii. Molecular Immunology. 1992, 29: 95-105. 10.1016/0161-5890(92)90161-P.

    Article  CAS  PubMed  Google Scholar 

  4. Ching WM, Dasch GA, Carl M, Dobson ME: Structural analyses of the 120-kDa serotype protein antigens of typhus group rickettsiae. Comparison with other S-layer proteins. Ann N Y Acad Sci. 1990, 590: 334-351.

    Article  CAS  PubMed  Google Scholar 

  5. Dasch GA: Isolation of species-specific protein antigens of Rickettsia typhi and Rickettsia prowazekii for immunodiagnosis and immunoprophylaxis. J Clin Microbiol. 1981, 14: 333-341.

    PubMed Central  CAS  PubMed  Google Scholar 

  6. Anacker RL, McDonald GA, List RH, Mann RE: Neutralizing activity of monoclonal antibodies to heat-sensitive and heat-resistant epitopes of Rickettsia rickettsii surface proteins. Infect immun. 1987, 55: 825-827.

    PubMed Central  CAS  PubMed  Google Scholar 

  7. Vishwanath S, McDonald GA, Watkins NG: A recombinant Rickettsia conorii vaccine protects guinea pigs from experimental boutonneuse fever and Rocky Mountain spotted fever. Infect Immun. 1990, 58: 646-653.

    PubMed Central  CAS  PubMed  Google Scholar 

  8. Gilmore RDJ, Joste N, McDonald GA: Cloning, expression and sequence analysis of the gene encoding the 120 kD surface-exposed protein of Rickettsia rickettsii. Mol Microbiol. 1989, 3: 1579-1586.

    Article  CAS  PubMed  Google Scholar 

  9. Gilmore RD, Cieplak W, Policastro PF, Hackstadt T: The 120 kilodalton outer membrane protein (rOmpB) of Rickettsia rickettsii is encoded by an unusually long open reading frame. Evidence for protein processing from a large precursor. Mol Microbiol. 1991, 5: 2361-2370.

    Article  CAS  PubMed  Google Scholar 

  10. Teysseire N, Raoult D: Comparison of Western immunoblotting and microimmunofluoresence for diagnosis of Mediterranean spotted fever. J Clin Microbiol. 1992, 30: 455-460.

    PubMed Central  CAS  PubMed  Google Scholar 

  11. Li H, Walker DH: RompA is a critical protein for the adhesion of Rickettsia rickettsii to host cells. Microbial Pathogenesis. 1998, 24: 289-298. 10.1006/mpat.1997.0197.

    Article  CAS  PubMed  Google Scholar 

  12. Uchiyama T: Role of major surface antigens of Rickettsia japonica in the attachment to host cell. Rickettsiae and rickettsial diseases. Edited by: Kazar J and Raoult D. 1999, Bratislava, Publishing house of the Slovak Academy of Sciences, 182-188.

    Google Scholar 

  13. Wren BW: A family of clostridial and streptococcal ligand-binding proteins with conserved C-terminal repeat sequences. Mol Microbiol. 1991, 5: 797-803.

    Article  CAS  PubMed  Google Scholar 

  14. Fournier PE, Roux V, Raoult D: Phylogenetic analysis of spotted fever group rickettsiae by study of the outer surface protein rOmpA. Int J Syst Bacteriol. 1998, 48: 839-849.

    Article  CAS  PubMed  Google Scholar 

  15. Roux V, Raoult D: Phylogenetic analysis of members of the genus Rickettsia using the gene encoding the outer-membrane protein rOmpB (ompB). Int J Syst Evol Microbiol. 2000, 50: 1449-1455.

    Article  CAS  PubMed  Google Scholar 

  16. Henderson IR, Navarro-Garcia F, Nataro JP: The great escape: structure and function of the autotransporter proteins. Trends Microbiol. 1998, 6: 370-378. 10.1016/S0966-842X(98)01318-3.

    Article  CAS  PubMed  Google Scholar 

  17. Hackstadt T, Messer R, Cieplak W, Peacock MG: Evidence for proteolytic cleavage of the 120-Kilodalton outer membrane protein of Rickettsiae : identification of an avirulent mutant deficient in processing. Infect Immun. 1992, 60: 159-165.

    PubMed Central  CAS  PubMed  Google Scholar 

  18. Blanc G, Ngwamidiba M, Ogata H, Fournier PE, Claverie JM, Raoult D: Molecular Evolution of Rickettsia Surface Antigens: Evidence of Positive Selection. Mol Biol Evol. 2005, 22: 2073-2083. 10.1093/molbev/msi199.

    Article  CAS  PubMed  Google Scholar 

  19. Sekeyova Z, Roux V, Raoult D: Phylogeny of Rickettsia spp. inferred by comparing sequences of 'gene D', which encodes an intracytoplasmic protein. Int J Syst Evol Microbiol. 2001, 51: 1353-1360.

    Article  CAS  PubMed  Google Scholar 

  20. Uchiyama T, Zhao LC, Uchida T: Demonstration of a heat-stable 120-kilodalton protein of Rickettsia japonica as a spotted fever group-common antigen. Microbiol Immunol. 1996, 40: 133-139.

    Article  CAS  PubMed  Google Scholar 

  21. Ngwamidiba M, Blanc G, Ogata H, Raoult D, Fournier PE: Phylogenetic study of Rickettsia species using sequences of the autotransporter protein-encoding gene sca2. Ann N Y Acad Sci. 2005, in press:

    Google Scholar 

  22. Roux V, Rydkina E, Eremeeva M, Raoult D: Citrate synthase gene comparison, a new tool for phylogenetic analysis, and its application for the rickettsiae. Int J Syst Bact. 1997, 47: 252-261.

    Article  CAS  Google Scholar 

  23. Roux V, Raoult D: Phylogenetic analysis of the genusRickettsia by 16S rDNA sequencing. Res Microbiol. 1995, 146: 385-396. 10.1016/0923-2508(96)80284-1.

    Article  CAS  PubMed  Google Scholar 

  24. Crocquet-Valdes PA, Weiss K, Walker DH: Sequence analysis of the 190 kDa antigen encoding gene of Rickettsia conorii (Malish 7 strain). Gene. 1994, 140: 115-119. 10.1016/0378-1119(94)90740-4.

    Article  CAS  PubMed  Google Scholar 

  25. Amiri H, Davids W, Andersson SG: Birth and death of orphan genes in Rickettsia. Mol Biol Evol. 2003, 20: 1575-1587. 10.1093/molbev/msg175.

    Article  CAS  PubMed  Google Scholar 

  26. Roux V: Phylogenetic analysis and taxonomic relationships among the genus Rickettsia. Rickettsiae and Rickettsial diseases at the turn of the third millinium. Edited by: Raoult D and Brouqui P. 1999, Marseille, Elsevier, 52-66.

    Google Scholar 

  27. Smith NH, Maynard Smith J, Spratt BG: Sequence evolution of the porB gene of Neisseria gonorrhoeae and Neisseria meningitidis : evidence of positive Darwinian selection. Mol Biol Evol. 1995, 12: 363-376.

    CAS  PubMed  Google Scholar 

  28. Chao CC, Chelius D, Zhang T, Daggle L, Ching WM: Proteome analysis of Madrid E strain of Rickettsia prowazekii. Proteomics. 2004, 4: 1280-1292. 10.1002/pmic.200300775.

    Article  CAS  PubMed  Google Scholar 

  29. Gimenez DF: Staining rickettsiae in yolk-sac cultures. Stain Technol. 1964, 39: 135-140.

    CAS  PubMed  Google Scholar 

  30. De Lamballerie X, Zandotti C, Vignoli C, Bollet C, de Micco P: A rare step microbial DNA extraction method using Chelex 100 suitable for gene amplification. Res Microbiol. 1992, 143: 785-790. 10.1016/0923-2508(92)90107-Y.

    Article  CAS  PubMed  Google Scholar 

  31. Colson P, Tamalet C, Raoult D: SVARAP and aSVARAP: simple tools for quantitative analysis of nucleotide and amino acid variability and primer selection for Clinical Microbiology. BMC Microbiol. 2006, In press:

    Google Scholar 

  32. Thompson JD, Higgins DG, Gibson TJ: CLUSTAL W: improving the sensitivity of progressive multiple sequence alignment through sequence weighting, position-specific gap penalties and weight matrix choice. Nucleic Acids Res. 1994, 22: 4673-4680.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  33. Kumar S, Tamura K, Jakobsen IB, Nei M: MEGA2: molecular evolutionary genetics analysis software. Bioinformatics. 2001, 17: 1244-1245. 10.1093/bioinformatics/17.12.1244.

    Article  CAS  PubMed  Google Scholar 

  34. Adachi J, Hasegawa M: MOLPHY version 2.3: programs for molecular phylogenetics based on maximum likelihood. Computer Science Monographs 28. 1996, Tokyo, Institute of Statistical Mathematics

    Google Scholar 

  35. PAUP*. Phylogenetic analysis using parsimony (* and other methods). 1998, Sunderland, MA, Sinauer

  36. Hasegawa M, Kishino H: Accuracies of the simple methods for estimating the bootstrap probability of a maximum-likelihood tree. Mol Biol Evol. 1994, 11: 142-145.

    CAS  Google Scholar 

  37. FREQSQ: [http://www.infobiogen.fr/services/analyseq/cgi-bin/freqsq_in.pl]. 2006

    Google Scholar 

  38. Andersson SGM, Sharp PM: Codon usage and base composition in Rickettsia prowazekii. J Mol Evol. 1996, 42: 525-536.

    Article  CAS  PubMed  Google Scholar 

  39. Yang Z, Nielsen R, Goldman N, Pedersen AM: Codon-substitution models for heterogeneous selection pressure at amino acid sites. Genetics. 2000, 155: 431-449.

    PubMed Central  CAS  PubMed  Google Scholar 

  40. Yang Z: PAML: a program package for phylogenetic analysis by maximum likelihood. Comput Appl Biosci. 1997, 13: 555-556.

    CAS  PubMed  Google Scholar 

Download references

Acknowledgements

The authors are grateful to Deborah Byrne for reviewing the manuscript.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Pierre-Edouard Fournier.

Additional information

Authors' contributions

The individual parts of the work presented in the paper were conducted as follows: MN carried out the molecular genetic studies, analyzed the sequences and drafted the manuscript. GB analyzed the sequences and drafted the manuscript. PEF participated in the study design, coordinated the study, and drafted the manuscript. DR conceived the study, and helped to draft the manuscript. All authors read and approved the final manuscript.

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Ngwamidiba, M., Blanc, G., Raoult, D. et al. Sca 1, a previously undescribed paralog from autotransporter protein-encoding genes in Rickettsia species. BMC Microbiol 6, 12 (2006). https://doi.org/10.1186/1471-2180-6-12

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1471-2180-6-12

Keywords