default search action
Berend Denkena
Person information
- affiliation: University of Hanover, Germany
Refine list
refinements active!
zoomed in on ?? of ?? records
view refined list in
export refined list as
showing all ?? records
2020 – today
- 2022
- [j77]Carolin Kellenbrink
, Nicolas Nübel, André Schnabel
A regeneration process chain with an integrated decision support system for individual regeneration processes based on a virtual twin. Int. J. Prod. Res. 60(13): 4137-4158 (2022) - [c12]Rico Ottermann
In Situ Resistance Trimming of Directly Deposited Thin-Film Strain Gauges. IEEE SENSORS 2022: 1-4 - [c11]Berend Denkena, Heinrich Klemme, Sebastian Kaiser, Maruan Shanib:
Intelligent Manufacturing Cell for Implants. IEEM 2022: 1578-1582 - [c10]Berend Denkena, Heinrich Klemme, Dennis Stoppel:
Machine Learning Based Reconstruction of Process Forces. SYSINT 2022: 23-32
2010 – 2019
- 2019
- [j76]Frederico C. Magalhães, Carlos E. H. Ventura, Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Kolja Meyer:
Prediction of surface residual stress and hardness induced by ball burnishing through neural networks. Int. J. Manuf. Res. 14(3): 295-310 (2019) - [j75]Berend Denkena
Material identification based on machine-learning algorithms for hybrid workpieces during cylindrical operations. J. Intell. Manuf. 30(6): 2449-2456 (2019) - [j74]Berend Denkena
Analysis of potentials to improve the machining of hybrid workpieces. Prod. Eng. 13(1): 11-19 (2019) - [j73]Berend Denkena
Surface integrity of turned laser-welded hybrid shafts. Prod. Eng. 13(1): 79-87 (2019) - 2018
- [j72]Jan Königsberg, Jan Reiners, Bernd Ponick
Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction. Int. J. Autom. Technol. 12(5): 669-677 (2018) - [j71]Lukas Groß, Alexander Herwig
Production-based design of a hybrid load introduction element for thin-walled CFRP Structures. Prod. Eng. 12(2): 113-120 (2018) - [j70]Berend Denkena
A new process chain for recycling of cemented carbide milling tools. Prod. Eng. 12(3-4): 547-553 (2018) - [j69]Berend Denkena
Frictionally damped tool holder for long projection cutting tools. Prod. Eng. 12(6): 715-722 (2018) - 2017
- [j68]O. Maiss
Influence of asymmetric cutting edge roundings on surface topography. Prod. Eng. 11(4-5): 383-388 (2017) - [j67]Berend Denkena
Temperature and energy partition for grinding of mixed oxide ceramics. Prod. Eng. 11(4-5): 409-417 (2017) - [j66]Berend Denkena
New tool concept for grinding a plateau-like surface for tribological applications. Prod. Eng. 11(4-5): 419-424 (2017) - [j65]Berend Denkena
Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled model. Prod. Eng. 11(4-5): 613-619 (2017) - [j64]Berend Denkena
Holistic process planning chain for robot machining. Prod. Eng. 11(6): 715-722 (2017) - [j63]Berend Denkena
Smart and energy-efficient dust suction concept for milling of fibre-reinforced plastics. Prod. Eng. 11(6): 723-729 (2017) - 2016
- [j62]Wolfgang Tillmann
Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools. Prod. Eng. 10(1): 17-24 (2016) - [j61]Bernd Breidenstein, Berend Denkena
Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti-6Al-4V. Prod. Eng. 10(2): 147-155 (2016) - [j60]Volker Böß
Repairing parts from nickel base material alloy by laser cladding and ball end milling. Prod. Eng. 10(4-5): 433-441 (2016) - [j59]Maria Löffler, Kolja Andreas, Ulf Engel, Robert Schulte, Daniel Gröbel, Eugen Krebs, Dennis Freiburg, Dirk Biermann
Tribological measures for controlling material flow in sheet-bulk metal forming. Prod. Eng. 10(4-5): 459-470 (2016) - [j58]Berend Denkena
Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems. Prod. Eng. 10(4-5): 489-496 (2016) - 2015
- [j57]Berend Denkena
Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines. Int. J. Autom. Technol. 9(4): 425-435 (2015) - [j56]Berend Denkena
Kinematic analysis of the cutting speed for continuous generating grinding. Prod. Eng. 9(1): 35-40 (2015) - [j55]Berend Denkena
Gear profile grinding with metal bonded CBN tools. Prod. Eng. 9(1): 73-77 (2015) - [j54]Berend Denkena
Design and analysis of a 2-DOF synchronous planar drive for machine tools. Prod. Eng. 9(1): 125-132 (2015) - [j53]Berend Denkena
Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts. Prod. Eng. 9(2): 187-193 (2015) - [j52]Berend Denkena
Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine tools. Prod. Eng. 9(2): 257-267 (2015) - [j51]Berend Denkena
Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings. Prod. Eng. 9(3): 299-305 (2015) - [j50]Berend Denkena
Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel. Prod. Eng. 9(3): 337-342 (2015) - 2014
- [j49]A. Nemeti, Berend Denkena
Time-oriented pricing for the tool and mould manufacturing industry. Prod. Eng. 8(1-2): 165-173 (2014) - [j48]Bernd-Arno Behrens
Application of methods for ecological optimization of crank shaft forging process. Prod. Eng. 8(3): 253-261 (2014) - [j47]Berend Denkena
Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum. Prod. Eng. 8(3): 273-282 (2014) - [j46]Berend Denkena
Chip formation and tool wear in turning of aluminum-alloyed UHC-steels. Prod. Eng. 8(4): 415-421 (2014) - [j45]Berend Denkena
Modeling and simulation of milling processes including process damping effects. Prod. Eng. 8(4): 453-459 (2014) - [j44]Alexandre M. Abrão
Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel. Prod. Eng. 8(5): 551-558 (2014) - [j43]Berend Denkena
Dressing of vitrified bonded CBN tools for continuous generating grinding. Prod. Eng. 8(5): 585-591 (2014) - [j42]Berend Denkena
Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills. Prod. Eng. 8(5): 627-633 (2014) - [j41]Berend Denkena
Interpretation and optimization of material flow via system behavior reconstruction. Prod. Eng. 8(5): 659-668 (2014) - 2013
- [j40]Berend Denkena
Adaptive Cutting Force Control with a Hybrid Axis System. Int. J. Autom. Technol. 7(4): 378-384 (2013) - [j39]Berend Denkena
Product Identification by Machined Micro Patterns. Int. J. Autom. Technol. 7(6): 735-741 (2013) - [j38]Berend Denkena
Special issue WGP: "System-integrated intelligence: new challenges for product and production engineering". Prod. Eng. 7(1): 1 (2013) - [j37]Berend Denkena
Design and analysis of a prototypical sensory Z-slide for machine tools. Prod. Eng. 7(1): 9-14 (2013) - [j36]Berend Denkena
Competence-based process planning for the workshop production. Prod. Eng. 7(2-3): 299-308 (2013) - [j35]Berend Denkena
XY-table for desktop machine tools based on a new fluidic planar drive. Prod. Eng. 7(5): 535-539 (2013) - [c9]Christian Bartelt, Volker Böß
A Software Architecture to Synchronize Interactivity of Concurrent Simulations in Systems Engineering. CE 2013: 19-29 - 2012
- [j34]Berend Denkena
Multicriteria dimensioning of hard-finishing operations regarding cross-process interdependencies. J. Intell. Manuf. 23(6): 2333-2342 (2012) - [j33]Berend Denkena
Integrative process chain optimization using a Genetic Algorithm. Prod. Eng. 6(1): 29-37 (2012) - [j32]Berend Denkena
Adaptive process planning. Prod. Eng. 6(1): 55-67 (2012) - [j31]Berend Denkena
Chip formation in grinding: an experimental study. Prod. Eng. 6(2): 107-115 (2012) - [j30]Sabrina Pluemer, Kathrin Voges-Schwieger, Berend Denkena
Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing. Prod. Eng. 6(2): 213-218 (2012) - [j29]Berend Denkena
Condition based maintenance planning of highly productive machine tools. Prod. Eng. 6(3): 277-285 (2012) - [j28]Berend Denkena
Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature. Prod. Eng. 6(4-5): 329-338 (2012) - [j27]Berend Denkena
Flank milling of compliant workpieces with chamfered tools. Prod. Eng. 6(4-5): 403-412 (2012) - [j26]Berend Denkena
Process stabilization with an adaptronic spindle system. Prod. Eng. 6(4-5): 485-492 (2012) - [c8]Volker Böß, Jan Brüning, Berend Denkena:
Standardized Communication in Simulation of Interacting Machine Tool Components. CE 2012: 825-836 - 2011
- [j25]Berend Denkena
Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning. Int. J. Autom. Technol. 5(3): 353-361 (2011) - [j24]Berend Denkena
Automated design of fixtures based on FEM simulations. Int. J. Comput. Aided Eng. Technol. 3(3/4): 256-269 (2011) - [j23]Berend Denkena
CAD-based cost calculation of mould cavities. Prod. Eng. 5(1): 73-79 (2011) - [j22]Berend Denkena
Topography prediction of resilient parts after flank milling with chamfered tools. Prod. Eng. 5(3): 273-281 (2011) - [j21]Berend Denkena
Linking total costs and benefits of ownership (TCBO) and process chain simulation for integrated assessment of manufacturing technologies and processes. Prod. Eng. 5(5): 557-564 (2011) - [j20]Lars Hvam
Optimizing the order processing of customized products using product configuration. Prod. Eng. 5(6): 595-604 (2011) - [j19]Christian Brecher, Berend Denkena
Identification of weak spots in the metrological investigation of dynamic machine behaviour. Prod. Eng. 5(6): 679-689 (2011) - [j18]Berend Denkena
Dynamic analysis of a motor-integrated method for a higher milling stability. Prod. Eng. 5(6): 691-699 (2011) - 2010
- [j17]Berend Denkena
Genetics and intelligence: new approaches in production engineering. Prod. Eng. 4(1): 65-73 (2010) - [j16]Berend Denkena
Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature. Prod. Eng. 4(5): 457-464 (2010)
2000 – 2009
- 2009
- [j15]Berend Denkena
Grinding of microstructured functional surfaces: a novel strategy for dressing of microprofiles. Prod. Eng. 3(1): 41-48 (2009) - [j14]Berend Denkena
Rule-based quotation costing of pressure die casting moulds. Prod. Eng. 3(1): 87-94 (2009) - [j13]Jan C. Aurich
Modelling and simulation of process: machine interaction in grinding. Prod. Eng. 3(1): 111-120 (2009) - [c7]Berend Denkena, Helge Henning, Jan Henjes:
Model-Based Dimensioning of Multistage Processes Regarding Multiple Criteria. DET 2009: 1043-1056 - 2008
- [j12]Berend Denkena
Microstructuring of functional surfaces by means of cutting processes. Prod. Eng. 2(1): 21-25 (2008) - [j11]Berend Denkena
Reduction of wear induced surface zone effects during hard turning by means of new tool geometries. Prod. Eng. 2(2): 123-132 (2008) - [j10]Berend Denkena
Computer-aided analysis of flow-characteristics of a micro-positioning system. Prod. Eng. 2(2): 185-191 (2008) - [j9]Berend Denkena
Sonic analysis in cut-off grinding of concrete. Prod. Eng. 2(2): 209-218 (2008) - [j8]Berend Denkena
Machining induced residual stress in structural aluminum parts. Prod. Eng. 2(3): 247-253 (2008) - [j7]Berend Denkena
Design of dynamic multi sensor systems. Prod. Eng. 2(3): 327-331 (2008) - [j6]Berend Denkena
Tool behavior at alternating thermo-mechanical loads during milling of compounds out of aluminum and spheroidal cast iron. Prod. Eng. 2(4): 351-356 (2008) - 2007
- [j5]Berend Denkena, Jörn Ostermann, Christian Becker, Christian Spille:
Mechanical information storage by use of an excited turning tool. Prod. Eng. 1(1): 25-30 (2007) - [j4]Berend Denkena, Martin Reichstein, Dennis Hahmann:
Dressing of filigree fine-grained metal bonded grinding wheels. Prod. Eng. 1(3): 239-243 (2007) - [j3]Berend Denkena, Carsten Schmidt:
Experimental investigation and simulation of machining thin-walled workpieces. Prod. Eng. 1(4): 343-350 (2007) - [c6]Berend Denkena, Hans-Christian Möhring
Simulationsbasierte Multisensorsystemauslegung. AMS 2007: 114-117 - [c5]Berend Denkena, P. Hesse, J. Friederichs, Armin Wedler
Schlüsselkomponenten für Roboter in der Produktion Roboterhaut und Sicherheitskonzept für die Mensch-Roboter Kooperation. AMS 2007: 158-162 - 2006
- [j2]Berend Denkena
Model-based control of a hexapod with linear direct drives. Int. J. Comput. Integr. Manuf. 19(5): 463-472 (2006) - [p1]Leif-Erik Lorenzen, Peer-Oliver Woelk, Berend Denkena, Thorsten Scholz, Ingo J. Timm, Otthein Herzog
Integrated Process Planning and Production Control. Multiagent Engineering 2006: 91-113 - 2005
- [j1]Xiaoli Li
Tool breakage monitoring using motor current signals for machine tools with linear motors. IEEE Trans. Ind. Electron. 52(5): 1403-1408 (2005) - [c4]Heinz Wörn, Björn Hein, Detlef Mages, Berend Denkena, Rene Apitz, Pawel Kowalski, Niels Reimer:
Combining manual haptic path planning of industrial robots with automatic path smoothing. ICINCO 2005: 387-390 - 2003
- [c3]Berend Denkena, Michael Zwick, Peer-Oliver Woelk:
Multiagent-Based Process Planning and Scheduling in Context of Supply Chains. HoloMAS 2003: 100-109 - [c2]Berend Denkena, Stephan Scherger, Martin Lünemann:
Mass Customized Shoe Lasts. MCPC 2003: 83:1-83:16 - 2002
- [c1]Berend Denkena, Hans Kurt Tönshoff, Michael Zwick, Peer-Oliver Woelk:
Process Planning and Scheduling with Multiagent Systems. BASYS 2002: 339-348
Coauthor Index
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
Unpaywalled article links
Add open access links from to the list of external document links (if available).
Privacy notice: By enabling the option above, your browser will contact the API of unpaywall.org to load hyperlinks to open access articles. Although we do not have any reason to believe that your call will be tracked, we do not have any control over how the remote server uses your data. So please proceed with care and consider checking the Unpaywall privacy policy.
Archived links via Wayback Machine
For web page which are no longer available, try to retrieve content from the of the Internet Archive (if available).
Privacy notice: By enabling the option above, your browser will contact the API of archive.org to check for archived content of web pages that are no longer available. Although we do not have any reason to believe that your call will be tracked, we do not have any control over how the remote server uses your data. So please proceed with care and consider checking the Internet Archive privacy policy.
Reference lists
Add a list of references from ,
, and
to record detail pages.
load references from crossref.org and opencitations.net
Privacy notice: By enabling the option above, your browser will contact the APIs of crossref.org, opencitations.net, and semanticscholar.org to load article reference information. Although we do not have any reason to believe that your call will be tracked, we do not have any control over how the remote server uses your data. So please proceed with care and consider checking the Crossref privacy policy and the OpenCitations privacy policy, as well as the AI2 Privacy Policy covering Semantic Scholar.
Citation data
Add a list of citing articles from and
to record detail pages.
load citations from opencitations.net
Privacy notice: By enabling the option above, your browser will contact the API of opencitations.net and semanticscholar.org to load citation information. Although we do not have any reason to believe that your call will be tracked, we do not have any control over how the remote server uses your data. So please proceed with care and consider checking the OpenCitations privacy policy as well as the AI2 Privacy Policy covering Semantic Scholar.
OpenAlex data
Load additional information about publications from .
Privacy notice: By enabling the option above, your browser will contact the API of openalex.org to load additional information. Although we do not have any reason to believe that your call will be tracked, we do not have any control over how the remote server uses your data. So please proceed with care and consider checking the information given by OpenAlex.
last updated on 2024-10-07 21:24 CEST by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: