[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Camera location0° 00′ 00″ N, 0° 00′ 00″ E Kartographer map based on OpenStreetMap.View all coordinates using: OpenStreetMapinfo
Template documentationview · edit · history · purge ]
This documentation is transcluded from Template:Location/doc.

Syntax #1: decimal degrees

Template used for geocoding Commons images, providing camera location using decimal or degrees/minutes/seconds (DMS) syntax. See Commons:Geocoding for more information.

{{Location}} = {{Camera location}} is the main template of the {{Object location}} and {{Globe location}} family and is supposed to be used to define the coordinates and heading of the location of the camera.

The template automatically sets the following categories: Depending on namespace:

In case of errors:

Wikidata related:

Usage

{{Location |1= |2= |3= }}

Should be placed directly above or below {{Information}}, {{Artwork}} or other similar template.
Note: some users prefer to include location template(s) into the "Description" field of {{Information}} template to group all location information – objections contend that graphic design is not ideally adjusted for such use. See this and this discussion.

Template parameters

ParameterDescriptionDefaultStatus
1LatitudeDegrees of Latitude. The sign indicates hemisphere: +(North) and -(South). DMS format is also allowed, for example 50° 37′ 50.63″ N.emptyoptional
2LongitudeDegrees of Longitude. The sign indicates hemisphere: +(East) and -(West). DMS format is also allowed, for example 6° 01′ 57.61″ E.emptyoptional
3
attributes
attributesInformation attributes - used to pass to GeoHack server metadata about the coordinates. Apart from heading, this information is not used by {{Location}} template. Attributes have to be in the format field1:value1_field2:value2_field3:value3, etc. The following fields are supported:
  • region:XX-YYY specifies the political region, used to select appropriate map resources. See here for more info.
  • XX is an ISO 3166-1 alpha 2 country code abbreviation, and
  • YYY is a 1-, 2- or 3- characters ISO 3166-2 (see en:ISO 3166-2#Format for details) province/region/state code abbreviation (typically the same as a local postal code abbreviation).
  • heading: indicates the direction in which the camera was pointing. It is given as degree values 0–360 (clockwise with north as 0) or a compass point abbreviation (up to four letters) as defined in Points of the compass. (Example: heading:NW). It should be very similar for both {{Location}} and {{Object location}} templates when used in the same image. For example "heading:N" means that the camera was pointing North when the photograph was taken. In case of {{Object location}} template that might mean that we are looking at a South wall/side of the structure/object.
  • scale:N specifies the desired map scale as 1:N. Since most images are at the lowest scale, the parameter should be given only if values different from the default are desired. See here for more info.
  • dim:<width><units> specifies the width of the object in meters or kilometers (example: dim:120m or dim:10km). Since most images are at the lowest scale, the parameter should be given only if values different from the default are desired. See here for more info.
  • source: where the data come from
  • class:object is a hard-coded value which will be added automatically to all images to tag this location as the "object" location.
emptyoptional
wikidata
Wikidata
wikidataWikidata Q-code of an item with coordinate location (P625). Alternative to latitude and longitude.emptyoptional
barebare"bare=1" will show only field value without field's name ("Object location")emptyoptional
secondarysecondarysecondary=1 will tag this set of coordinates as secondary. This template calls {{#coordinates:}} parser function, one of the parameters of which is primary vs. secondary label. Primary coordinates define file's camera location and are the default, but each file can only have single primary location tag.emptyoptional
precprecisionBy default the georeference precision is about 0.3 meters or 1/100 of a second on the equator. To show less digits add parameter "prec" with a measurement precisions expressed in meters. For example 40 meter uncertainty would be expressed as "prec=40". At the moment this parameter only affects the display of the coordinates.0.3optional
langlanguagelanguage code (only needs to be provided if the language shall be fixed and independent from the user's preferences)language code of the user language ({{int:Lang}})optional

Additional information

The template is intended to be used in the following namespaces: the File namespace

The template is intended to be used by the following user groups: all users

Localization

This template is not intended to be localized.

Syntax #2: Degrees/Minutes/Seconds (DMS)

Alternative DMS syntax.

Usage

{{Location |1= |2= |3= |4= |5= |6= |7= |8= |9= }}

Template parameters

ParameterDescriptionDefaultStatus
1latitude degreesDegrees of Latitudeemptyrequired
2latitude minutesMinutes of Latitudeemptyrequired
3latitude secondsSeconds of Latitudeemptyrequired
4North/South hemisphereLatitude Direction or North/South hemisphere (N or S)emptyrequired
5longitude degreesDegrees of Longitudeemptyrequired
6longitude minutesMinutes of Longitudeemptyrequired
7longitude secondsSeconds of Longitudeemptyrequired
8East/West hemisphereLongitude Direction or East/West Hemisphere (W or E)emptyrequired
9
attributes
attributesInformation attributes - used to pass to GeoHack server metadata about the coordinates. Apart from heading, this information is not used by {{Location}} template. Attributes have to be in the format field1:value1_field2:value2_field3:value3, etc. The following fields are supported:
  • region:XX-YYY specifies the political region, used to select appropriate map resources. See here for more info.
  • XX is an ISO 3166-1 alpha 2 country code abbreviation, and
  • YYY is a 1-, 2- or 3- characters ISO 3166-2 (see en:ISO 3166-2#Format for details) province/region/state code abbreviation (typically the same as a local postal code abbreviation).
  • heading: indicates the direction in which the camera was pointing. It is given as degree values 0–360 (clockwise with north as 0) or a compass point abbreviation (up to four letters) as defined in Points of the compass. (Example: heading:NW). It should be very similar for both {{Location}} and {{Object location}} templates when used in the same image. For example "heading:N" means that the camera was pointing North when the photograph was taken. In case of {{Object location}} template that might mean that we are looking at a South wall/side of the structure/object.
  • scale:N specifies the desired map scale as 1:N. Since most images are at the lowest scale, the parameter should be given only if values different from the default are desired. See here for more info.
  • dim:<width><units> specifies the width of the object in meters or kilometers (example: dim:120m or dim:10km). Since most images are at the lowest scale, the parameter should be given only if values different from the default are desired. See here for more info.
  • source: where the data come from
  • class:object is a hard-coded value which will be added automatically to all images to tag this location as the "object" location.
emptyoptional
barebare"bare=1" will show only field value without field's name ("Camera location")emptyoptional
precprecisionBy default the georeference precision is about 0.3 meters or 1/100 of a second on the equator. To show less digits add parameter "prec" with a measurement precisions expressed in meters. For example 40 meter uncertainty would be expressed as "prec=40". At the moment this parameter only affects the display of the coordinates.0.3optional
langlanguagelanguage code (only needs to be provided if the language shall be fixed and independent from the user's preferences)language code of the user language ({{int:Lang}})optional

Additional information

The template is intended to be used in the following namespaces: all content namespaces

The template is intended to be used by the following user groups: all users

Relies on:
Module:Coordinates

See also

  • Other templates from the family:
  • Related templates

== Localization ==

All translations at Module:I18n/coordinates

Syntax #2a: Degrees/Minutes/Seconds (DMS) symbols

It is possible to use the output format (of e.g. Location, or Wikimapia) as the input for Location:
The DMS data string can be converted from the symbol format e.g. {{ Location1 = 34°01′27.37″N 116°09′29.88″W... }}
to the above DMS format; all the other parameters also like above. Additional spaces or commas won't matter.

Examples

Syntax #1 — 2 location values
Code
 {{Location|34.02427|-116.15830|region:DE-NI_scale:5000}}
Produces
Camera location34° 01′ 27.37″ N, 116° 09′ 29.88″ W Kartographer map based on OpenStreetMap.View all coordinates using: OpenStreetMapinfo
Syntax #2 — 8 location values
Code
 {{Location|34|1|27.37|N|116|9|29.88|W|region:DE-NI_scale:6000}}
Produces
Camera location34° 01′ 27.37″ N, 116° 09′ 29.88″ W  Heading=225° Kartographer map based on OpenStreetMap.View all coordinates using: OpenStreetMapinfo
Syntax #2a — 1 parameter
Code {{Location|34° 01′ 27.37″ N, 116° 09′ 29.88″ W|region:DE-NI_scale:10000_heading:SW}}
Produces
Camera location34° 01′ 27.37″ N, 116° 09′ 29.88″ W  Heading=225° Kartographer map based on OpenStreetMap.View all coordinates using: OpenStreetMapinfo
Syntax #2b — 1 parameter
Code {{Location|34 1 27.37 N 116 9 29.88 W|region:DE-NI_scale:10000_heading:SW}}
Produces
Camera location34° 01′ 27.37″ N, 116° 09′ 29.88″ W  Heading=225° Kartographer map based on OpenStreetMap.View all coordinates using: OpenStreetMapinfo

Template used for geocoding Commons images, providing camera location using decimal or degrees/minutes/seconds (DMS) syntax.

Template parameters[Edit template data]

ParameterDescriptionTypeStatus
latlat

no description

Unknownoptional
lonlon

no description

Unknownoptional