Search Results (65)

With the growing interest in reducing CO₂ emissions to combat climate change, humanity is turning to green or renewable sources of electricity. There are numerous issues associated with the development of these sources. One of the key aspects of renewable energy sources is their problematic controllability, namely the control of energy production over time. Renewable sources are also associated with issues of recycling, utilization in different geographical zones, environmental impact within the required area, and so on. One of the most discussed issues today, however, is the question of efficient use of the energy produced from these sources. There are several different approaches to storing renewable energy, e.g., supercapacitors, flywheels, batteries, PCMs, pumped-storage hydroelectricity, and flow batteries. In the commercial sector, however, mainly due to acquisition costs, these options are narrowed down to only one concept: storing energy using an electrochemical storage device—batteries. Nowadays, lithium-ion batteries (LIBs) are the most widespread battery type. Despite many advantages of LIB technology, the availability of materials needed for the production of these batteries and the associated costs must also be considered. Thus, this battery type is not very ideal for large-scale stationary energy storage applications. Sodium-ion batteries (SIBs) are considered one of the most promising alternatives to LIBs in the field of stationary battery storage, as sodium (Na) is the most abundant alkali metal in the Earth’s crust, and the cell manufacturing process of SIBs is similar to that of LIBs. Unfortunately, considering the physical and electrochemical properties of Na, different electrode materials, electrolytes, and so on, are required. SIBs have come a long way since they were discovered. This review discusses the latest developments regarding the materials used in SIB technology. Full article

The Canary Archipelago, in general, and the island of Gran Canaria, in particular, operate with an independent energy system (SIE), which depends largely on local power generation. Today, its energy supply comes mainly from two sources: (a) Renewable energy, accounting for 19.90%, and (b) Fossil fuel combustion in thermal power plants, contributing the remaining 80.10%. The existing energy infrastructure faces challenges due to aging technology, requiring either modernization or replacement to prevent a potential energy crisis and ensure a sustainable production cycle. A transformative step to improve the system is the completion and commissioning in 2030 of the Chira-Soria pumped hydroelectric energy storage (PHES) plant. This installation will allow water to be transported to high altitudes by pumping, to be deposited until the right time and to be turbined to generate electricity in optimal conditions. To fully understand the impact of this integration, detailed analyses of annual energy production patterns, equipment performance, and real-time demand data (collected at five-minute intervals) will be conducted. These assessments will provide insights into how the Chira-Soria PHES can be seamlessly integrated into Gran Canaria’s energy network. Furthermore, they will help identify both the strengths and limitations of this storage solution, paving the way for a more resilient and efficient energy future for the island. Full article

As the penetration of renewable energy sources (RESs) in power systems continues to increase, their volatility and unpredictability have exacerbated the burden of frequency regulation (FR) on conventional generator units (CGUs). Therefore, to reduce frequency deviations caused by comprehensive disturbances and improve system frequency stability, this paper proposes an integrated strategy for hybrid energy storage systems (HESSs) to participate in primary frequency regulation (PFR) of the regional power grid. Once the power grid frequency exceeds the deadband (DB) of the HESS, the high-frequency signs of the power grid frequency are managed by the battery energy storage system (BESS) through a division strategy, while the remaining parts are allocated to pumped hydroelectric energy storage (PHES). By incorporating positive and negative virtual inertia control and adaptive droop control, the BESS effectively maintains its state of charge (SOC), reduces the steady-state frequency deviation of the system, and provides rapid frequency support. When the system frequency lies within the DB of the HESS, an SOC self-recovery strategy restores the BESS SOC to an ideal range, further enhancing its long-term frequency regulation (FR) capability. Finally, a regional power grid FR model is established in the RT-1000 real-time simulation system. Simulation validation is conducted under three scenarios: step disturbances, short-term continuous disturbances, and long-term RES disturbances. The results show that the proposed integrated strategy for HESS participation in PFR not only significantly improves system frequency stability but also enhances the FR capability of the BESS. Full article

This paper addresses the challenge of developing a cost-effective and efficient soft-starting method for doubly fed induction machines (DFIMs), a critical requirement for various industrial applications, such as pumped-storage hydropower. The research aims to improve a previously developed starting method by introducing a rotor-side synchronization technique at standstill conditions, which simplifies the starting process and eliminates the need for additional equipment such as autotransformers, resistors, or auxiliary converters. The proposed method begins with the stator winding being fed directly from the power system, while the rotor-side converter adjusts the voltage and frequency to achieve synchronization. Once synchronized, the rotor frequency is gradually reduced by the converter, resulting in a smooth acceleration of the machine. The methodology is validated through a combination of simulations and experimental testing, demonstrating the effectiveness of the proposed approach. The results reveal smooth startup dynamics, with significant reductions in electrical stress, operational complexity, and converter sizing requirements compared to existing methods. Notably, the magnetizing current is supplied directly by the power system through the stator, reducing the burden on the rotor converter by 60% compared to the previous method. The conclusions highlight the method’s robustness and its potential as a superior alternative to existing DFIM starting techniques. Full article

This study evaluated the greenhouse gas (GHG) emissions associated with hydrogen production in South Korea (hereafter referred to as Korea) using water electrolysis. Korea aims to advance hydrogen as a clean fuel for transportation and power generation. To support this goal, we employed a life cycle assessment (LCA) approach to evaluate the emissions across the hydrogen supply chain in a well-to-pump framework, using the Korean clean hydrogen certification tiers. Our assessment covered seven stages, from raw material extraction for power plant construction to hydrogen production, liquefaction, storage, and distribution to refueling stations. Our findings revealed that, among the sixteen power sources evaluated, hydroelectric and onshore wind power exhibited the lowest emissions, qualifying as the Tier 2 category of emissions between 0.11 and 1.00 kgCO₂e/kg H₂ under a well-to-pump framework and Tier 1 category of emissions below 0.10 kgCO₂e/kg H₂ under a well-to-gate framework. They were followed by photovoltaics, nuclear energy, and offshore wind, all of which are highly dependent on electrolysis efficiency and construction inputs. Additionally, the study uncovered a significant impact of electrolyzer type on GHG emissions, demonstrating that improvements in electrolyzer efficiency could substantially lower GHG outputs. We further explored the potential of future energy mixes for 2036, 2040, and 2050, as projected by Korea’s energy and environmental authorities, in supporting clean hydrogen production. The results suggested that with progressive decarbonization of the power sector, grid electricity could meet Tier 2 certification for hydrogen production through electrolysis, and potentially reach Tier 1 when considering well-to-gate GHG emissions. Full article

The present study deals with an accident analysis of the “Chaira” Bulgaria high-pressure Pumped Hydroelectric Energy Storage (PHES), especially the failures of the Francis large-scale Hydraulic Unit No. 4 (HU4). The causes of overloading and cracking of the stay vanes and their functionality are investigated. Despite many studies on the behavior of the runner and its safe operation, the complete destruction of the system due to the stay vanes failure has not been sufficiently studied and published in the scientific literature. The aim is to assess the reasons that have led to this unprecedented accident of the “Chaira” PHES of the total destruction of the stay vanes. Based on the historical data and the operating modes, as well as on the identification of the critical elements, an objective assessment of the risks of damage of the stay vanes and of the entire unit is proposed. A virtual prototype is built for the simulation of the system behavior in working and emergency conditions. The loads, stresses, and deformations are precisely calculated. The critical elements of the highly-loaded blocks are evaluated. Low-cycle material fatigue is with a high degree of confidence the dominant reason for the stay vanes complete destruction. The results of the research are used to propose measures for the possible rehabilitation and/or replacement of the unit. Full article

During the long-term operation of hydraulic structures under the action of complex loads and impacts, non-design changes occur, which lead to a decrease in the bearing capacity and safety and, accordingly, to the need for structural reinforcements. Experiments were conducted to study the strengthening of reinforced concrete models of hydraulic structures with interblock construction joints (located in two directions) and with the low longitudinal reinforcement coefficients typical of hydraulic structures (μ_s = 0.0039 and μ_s = 0.0083), using the low concrete classes B15 and B25. These structures were strengthened using external reinforcement with carbon ribbons of the FibArm 530/300 type. The results revealed an increase in the bearing capacity (by 1.355- and 1.66-fold); accordingly, the high efficiency of this strengthening method for reinforced concrete hydraulic structures was proven. Using the results of these experiments, including the obtained special characteristic of the cracking of reinforced concrete structures and the results of studies by other authors, recommendations for calculations involving reinforced concrete hydraulic engineering structures strengthened with an external reinforcement system of carbon-fibre-based composite materials were developed and proposed. Carbon-fibre-based composite materials are used as elements of external reinforcement for building structures (unidirectional—tapes, bidirectional—meshes and fabrics). The calculation recommendations proposed by the authors can be taken into account for the creation of a regulatory framework for hydropower facilities, including hydroelectric power plants and pumped-storage power plants. They justify the use of an external reinforcement system made with carbon-fibre-based composite materials to strengthen hydraulic structures in operation and provide an increased level of safety for reinforced concrete structures and constructions. Full article

Under “dual-carbon” goals and rapid renewable energy growth, increasing start-stop frequency poses new challenges to safe operations of pumped-storage power plant equipment. Ensuring equipment safety and predictive maintenance under complex conditions urgently requires vibration warnings and trend forecasting for pumped-storage units. In this study, the measured vibration-signal characteristics of pumped-storage units in a strong background-noise environment are obtained using a noise-reduction method that integrates BA-VMD and wavelet thresholding. We monitored the vibration-signal data of hydroelectric units over a long period of time, and the measured vibration-signal characteristics of pumped-storage units in a strong background-noise environment are accurately obtained using a noise-reduction method that integrates BA-VMD and wavelet thresholding. In this paper, a BP neural network prediction model, a support vector machine (SVM) prediction model, a convolutional neural network (CNN) prediction model, and a long short-term memory network (LSTM) prediction model are used to predict the trend of vibration signals of the pumped-storage unit under different operating conditions. The model prediction effect is analyzed by using the different error evaluation functions, and the prediction results are compared with the predicted results of the four different methods. By comparing the prediction effects of the four different methods, it is concluded that LSTM has higher prediction accuracy and can predict the vibration trends of hydropower units more accurately. Full article

Conventional energy storage systems, such as pumped hydroelectric storage, lead–acid batteries, and compressed air energy storage (CAES), have been widely used for energy storage. However, these systems face significant limitations, including geographic constraints, high construction costs, low energy efficiency, and environmental challenges. Among these, lead–acid batteries, despite their widespread use, suffer from issues such as heavy weight, sensitivity to temperature fluctuations, low energy density, and limited depth of discharge. Lithium-ion batteries (LIBs) have emerged as a promising alternative, offering portability, fast charging, long cycle life, and higher energy density. However, LIBs still face challenges related to limited lifespan, safety concerns (such as overheating), and environmental impact due to resource extraction and emissions. This review explores the introduction of nanotechnology as a transformative approach to enhance efficiency and overcome the limitations of LIBs. We provide an in-depth overview of various nanotechnology-based solutions for LIBs, focusing on their impact on energy density, cycle life, safety, and environmental sustainability. Additionally, we discuss advanced thermal analysis techniques used to assess and improve the performance of nanotechnology-enhanced LIBs. Finally, we examine the role of nanoparticles in the environmental remediation of LIBs, offering insights into how they can mitigate the ecological footprint of battery disposal and recycling. This review aims to highlight the potential of nanotechnology to revolutionize energy storage systems and address the growing demand for efficient and sustainable energy solutions. Full article

With the rapid development of renewable energy sources such as wind and solar, the net load characteristics of power systems have undergone fundamental changes. This paper defines quantitative analysis indicators for net load characteristics and examines how these characteristics evolve as the proportion of wind and solar energy increases. By identifying inflection points in the system’s adjustment capabilities, we categorize power systems into low, medium, and high renewable energy penetration. We then establish adjustment models that incorporate traditional coal power, hydropower, natural gas generation, adjustable loads, system interconnections, pumped-storage hydroelectricity, and new energy storage technologies. A genetic algorithm is employed to optimize and balance the net load curves under varying renewable energy proportions, analyzing the mechanism behind net load balance. A case study, based on real operational data from 2023 for a provincial power grid in western China, which is rich in renewable resources, conducts a quantitative analysis of the system’s adjustment capability inflection point and net load balancing strategies. The results demonstrate that the proposed method effectively captures the evolution of the system’s net load and reveals the mechanisms of net load balancing under different renewable energy penetration levels. Full article

As part of the initiative to achieve Singapore’s Green Plan 2030, we propose to investigate the potential of utilizing micro-pumped hydroelectric energy storage (PHES) systems in multi-level carparks (MLCP: a stacked car park that has multiple levels, may be enclosed, and can be an independent building) as a more environmentally friendly alternative to traditional battery storage for a surplus of solar energy. This study focuses on an MLCP with a surface area of 3311 m² and a height of 12 m, considering design constraints such as a floor load capacity of 5 kN/m² and the requirement for a consistent energy discharge over a 12 h period. The research identifies a Turgo turbine as the optimal choice, providing a power output of 2.9 kW at a flow rate of 0.03 m³/s with an efficiency of 85%. This system, capable of storing 1655.5 m³ of water, can supply power to 289 light bulbs (each consuming 10 W) for 15.3 h, thus having the capacity to support up to three MLCPs. These results underscore the environmental advantages of PHES over conventional batteries, highlighting its potential for integration with solar panels to decrease carbon emissions. This approach not only aligns with Singapore’s green initiatives but also promotes the development of a more sustainable energy infrastructure. Full article

The increase in the share of renewable energy sources (RES) leads to a growing need for sources or systems/actions to stabilize the national energy grid. Such stabilizing actions include market tools, such as prices and demand-side response (DSR) tools, as well as flexible energy sources (e.g., gas). In addition, energy storage, where pumped storage hydroelectricity (PSH) accounts for 90% of global storage capacity, plays an important role. Therefore, the authors presented a detailed analysis of PSH in the context of the dynamic growth of installed capacity in renewable energy sources. They analyzed the economic viability of this type of power plant, with a particular emphasis on operational costs, energy production, and revenue. The Młoty case study and market data, including historical data on various PSH, were presented and analyzed. This study uses copulas, simulation, and statistical analysis. The authors proved that market prices and arbitrage actions alone are not sufficient to achieve profitability of the investment; however, additional benefits, such as fees for available power, enable the achievement of economic profitability. The reason for this is the fact that one of the main goals of PSH is to serve as a power reserve. In addition, this paper presents the analysis of the utilization of existing PSH in the form of full pumping and energy generation cycles (charging and discharging storage). Full article

This paper presents a quantitative assessment of the value of hydroelectric power plants (HPPs) in power systems with a significant penetration of variable renewable energy sources (VRESs). Through a capacity expansion planning (CEP) model that incorporates a detailed representation of HPP operating principles, the study investigates the construction and application of HPP rule curves essential for seasonal operation. A comparative analysis is also conducted between the proposed rule curve formulation and alternative modeling techniques from the literature. The CEP model optimizes installed capacities per technology to achieve predefined VRES penetration targets, considering hourly granularity and separate rule curves for each HPP. A case study involving twelve reservoir hydropower stations and two open-loop pumped hydro stations is examined, accounting for standalone plants and cascaded hydro systems across six river basins. The study evaluates the additional generation and storage required to replace the hydropower fleet under high VRES penetration levels, assessing the resulting increases in total system cost emanating from introducing such new investments. Furthermore, the study approximates the storage capabilities of HPPs and investigates the impact of simplified HPP modeling on system operation and investment decisions. Overall, the findings underscore the importance of reevaluating hydro rule curves for future high VRES penetration conditions and highlight the significance of HPPs in the energy transition towards carbon neutrality. Full article

This research investigates a grid with two areas interconnected by a high-voltage direct-current (DC) link. One of the areas, called the sending-end region, has intermittent renewable generation and frequency stability issues. To address the lack of frequency-regulation (FR) resources in the sending-end region of the interconnected grid, the participation of hydroelectricity–photovoltaics and pumped storage complementary systems (HPPCSs) in auxiliary frequency-regulation (AFR) services is studied in the context of the construction of the electricity market. Firstly, the HPPCS participating in AFR services considering DC modulation is modeled by combining the operational characteristics of the actual power station. Taking the purchase cost of auxiliary service as the objective function, the optimum allocation of FR scheduling demand is achieved by the proposed method. The simulations confirm that the proposed method of HPPCS participation in the AFR service of the sending-end grid can effectively maintain the frequency stability of the regional interconnected grid while ensuring optimal economic efficiency. The proposed method provides the optimal scheduling solution for multiple energy resources participating in the AFR service of the grid. Full article

Gran Canaria, due to its status as an island, has an isolated energy system (IES). This has made it dependent on itself for energy production, which is basically obtained from: (a) Wind and solar energy, which equals 19% of the total energy produced, (b) Energy obtained from the burning of fossil fuels in the energy production equipment of the existing thermal power stations, which equals 81% of the total energy produced. A solution must be found to the current production system, which is already partially obsolete and is due for renewal and/or decommissioning, in order to avoid “Energy Zero”, which means a change in the production cycle. In addition, the incorporation of a pumped hydroelectric energy storage plant “Chira-Soria” into the Gran Canaria electricity system represents another, even more important, change in the dynamics followed up to now. Basically, this plant, which is hydraulically stabilized by means of a seawater desalination plant, incorporates energy storage by storing water at high altitude to be turbined under appropriate conditions. The new situation will be analyzed with this incorporation and the option of an integrated operation in the overall energy system of Gran Canaria will be considered. Full article