[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Next Article in Journal
Cyber–Physical Active Distribution Networks Robustness Evaluation against Cross-Domain Cascading Failures
Next Article in Special Issue
Development of a CALPHAD Thermodynamic Database for Pu-U-Fe-Ga Alloys
Previous Article in Journal
Anti-Congestion Route Planning Scheme Based on Dijkstra Algorithm for Automatic Valet Parking System
Previous Article in Special Issue
Ground-State and Thermodynamical Properties of Uranium Mononitride from Anharmonic First-Principles Theory
You seem to have javascript disabled. Please note that many of the page functionalities won't work as expected without javascript enabled.
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Assessing Relativistic Effects and Electron Correlation in the Actinide Metals Th to Pu

1
Lawrence Livermore National Laboratory, Livermore, CA 94550, USA
2
Brookhaven National Laboratory, Upton, NY 11973, USA
*
Authors to whom correspondence should be addressed.
Appl. Sci. 2019, 9(23), 5020; https://doi.org/10.3390/app9235020
Submission received: 25 October 2019 / Revised: 13 November 2019 / Accepted: 18 November 2019 / Published: 21 November 2019

Abstract

:
Density functional theory (DFT) calculations are employed to explore and assess the effects of the relativistic spin–orbit interaction and electron correlations in the actinide elements. Specifically, we address electron correlations in terms of an intra-atomic Coulomb interaction with a Hubbard U parameter (DFT + U). Contrary to recent beliefs, we show that for the ground-state properties of the light actinide elements Th to Pu, the DFT + U makes its best predictions for U = 0. Actually, our modeling suggests that the most popular DFT + U formulation leads to the wrong ground-state phase for plutonium. Instead, extending DFT and the generalized gradient approximation (GGA) with orbital–orbital interaction (orbital polarization; OP) is the most accurate approach. We believe the confusion in the literature on the subject mostly originates from incorrectly accounting for the spin–orbit (SO) interaction for the p1/2 state, which is not treated in any of the widely used pseudopotential plane-wave codes. Here, we show that for the actinides it suffices to simply discard the SO coupling for the p states for excellent accuracy. We thus describe a formalism within the projector-augmented-wave (PAW) scheme that allows for spin–orbit coupling, orbital polarization, and non-collinear magnetism, while retaining an efficient calculation of Hellmann–Feynman forces. We present results of the ground-state phases of all the light actinide metals (Th to Pu). Furthermore, we conclude that the contribution from OP is generally small, but substantial in plutonium.

1. Introduction

In the last several decades, various computational techniques to calculate the electronic structure and ground-state properties of actinides have been suggested in the literature [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26]. In these studies, a comparison of the calculated equilibrium volumes with experiments has often served the purpose to evaluate the quality of the modeling and the underlying physics of the 5f electrons. From these works a consistent picture emerges for thorium through neptunium where the 5f electrons can be described as bonding and delocalized (band) electrons. The implication is that the actinide volumes decrease in a parabolic fashion with atomic number for Th to Pu, reminiscent of the non-magnetic d-transition metals. The physical interpretation, given by Friedel [27], is that for the first half of the series, bonding electrons contract the volumes while for the second half, anti-bonding electrons expand the lattice. The parabolic behavior is readily verified by assuming a rectangular electron density of states and the corresponding electron-energy dependence on the volume [27].
Plutonium, on the other hand, deviates slightly from this simple trend. In this case, relativistic effects [4], crystal structure [8,10], and possible electron correlation effects beyond the local density approximation [9] are suggested as explanations for some of the discrepancy noted between theory and experiments. However, a much-improved description of plutonium is obtained, still within the 5f-band picture, when magnetic effects are addressed [13]. Acknowledging these magnetic interactions and the relativistic spin–orbit coupling, that represent Hund’s three rules for an atom in the solid, results in very good atomic volumes and energetics not only for α-plutonium but also for the other phases [14,15,16,17,18].
Another important realization, directly related to the theoretical atomic volumes, is that the spin–orbit interaction requires explicit incorporation of relativistic p1/2 orbitals in the partial-wave expansion of the wave functions near the atom. This state, however, is not present in electronic-structure codes that use scalar-relativistic basis functions [19,20]. Nowadays, all-electron calculations that deal with this issue and account for magnetic effects in plutonium very nicely reproduce the expected atomic volumes for the light actinides, Th to Pu, without any ad hoc intra-atomic Coulomb interactions [24]. Furthermore, within the 5f-band model, the correct ground-state phase is predicted for the light actinide metals, Th to Pu [11,18].
Contrary to the conclusions from numerous past studies [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26], it has been proposed in recent years that one must account for Coulomb repulsion in the electronic structure of the light actinide metals [28,29,30,31,32,33,34,35,36,37,38,39]. In these reports, a variety of U parameters are chosen, but a small U has largely been favored (U~1 eV). Exceptions are investigations focused on δ-plutonium, where larger U’s have often been adopted (U > 4 eV), as has been discussed thoroughly in a recent review paper [40].
Most of these DFT + U calculations [28,29,30,31,32,33,34,35,36,37,38,39] utilize plane-wave pseudopotential methods and because the obtained atomic volumes are smaller than expected, or for other reasons, one concludes a need for stronger electron correlation and employment of a Hubbard U. In this context, the improvement of the DFT + U volumes has been misinterpreted as a need for this type of electron correlation in the modeling, when in reality the situation reflects cancellation of errors.
Although this misunderstanding that relates to spin–orbit coupling was discussed to a degree in a previous report [41], it has not been thoroughly addressed in the literature. Here, we apply a correction to the spin–orbit coupling that solves the issue of the problematic p1/2 state [20] for the actinide volumes. With this correction, and careful consideration of other approximations, we are able to assess that there is no need, and it is actually harmful, to include an intra-atomic Coulomb repulsion (DFT + U) in the electronic structure.

2. Computational Methods

We show results derived from density functional theory that was developed in the mid-1960s [42,43]. Density functional theory is actually correct, but it relies on practical approximations. The central assumption relates to the electrons exchange and correlation interactions. For the actinide metals, we employ the generalized gradient approximation that is more proper than the previously suggested local density approximation [6]. Specifically, we are applying the Perdew–Burke–Ernzerhof (PBE) parameterization of the generalized gradient approximation (GGA) [44]. To our knowledge, there is no established, parameter-free, functional that results in larger atomic volumes in the actinides than that of the GGA. Therefore, there is no choice to replace the GGA to expand the volumes, while a +U approach can accomplish this objective and has often been applied for the actinides, as discussed in the introduction.
The actinide metals exhibit interesting crystal structures, beginning with an innocent face-centered cubic for Th with a gradual escalation of complexity to tetragonal (Pa), orthorhombic (U and Np), and finally culminating with a monoclinic structure (α-plutonium). These structures are described in the compilation by Donohue [45]. For best possible accuracy, when calculating the equilibrium volumes, we have optimized these crystal structures (not the cubic phase) so that the model gives the lowest total energy (structural relaxation). This relaxation has generally a rather weak effect on the actinide volumes, except for α-plutonium where it is significant. In this instance, a structural relaxation contracts the volume substantially relative to a calculation where the experimental (room-temperature) structure is assumed [40,46].
It has been reported that orbital–orbital interactions, absent in conventional DFT, is important for plutonium [14,40,47]. This interaction is efficiently included in an orbital-polarization scheme for some of the calculations presented in this study. In terms of the technical details of the computations, we are applying three techniques. The bulk of the calculations are performed with the pseudopotential plane-wave Vienna ab initio simulation package (VASP) code.
In VASP, the computational scheme relies on the GGA with PBE exchange and correlation functional [44] and the projector-augmented-wave (PAW) method with plane-wave basis set as implemented in VASP [48,49,50]. The computational parameters consist of an energy cut-off of 450 eV, energy convergence of 100 eV, and a Monkhorst–Pack scheme k-point mesh of typically 12 × 12 × 12 for a 1-atom cell and correspondingly less for multi-atom cells. In the cases where we perform DFT + U computations, we employ the technique suggested by Dudarev et al. [51] for the 5f electrons with an effective U = 0.4 eV.
The spin–orbit interaction and orbital polarization are included, allowing for non-collinear spins. For the spin–orbit coupling, we have introduced a correction that retains the scalar-relativistic treatment for the p states. Orbital polarization has been implemented similarly to the scheme proposed by Eriksson et al. [52]. In this approach, the DFT total-energy functional, EDFT, is amended by a quadratic term favoring orbital polarization,
  E D F T   +   O P   =   E D F T     1 2 I E I 3 [ L I , z f ] 2
where E I 3 is the Racah parameter that is a linear combination of the radial Slater integrals F2, F4, and F6 over f-electron orbitals within a muffin-tin sphere centered on site I. For consistency and simplicity, we use a constant Racah parameter that is an average of spin-decomposed values obtained from all-electron calculations (see below).   L I , z f   is   the   z component of the angular-momentum operator within the same sphere operating on the f states (5f in this case). This formulation of the orbital-polarization Hamiltonian has mainly been implemented in conjunction with spin–orbit coupling in all-electron codes within the second-variation approximation assuming collinear spin polarization.
Analogous to the conventional formulation of the orbital polarization (OP) method, while having the computational expediency of plane-wave codes and accurate Hellman–Feynman forces, we make use of a variational total-energy formulation of the OP Hamiltonian in the context of non-collinear magnetism. It is easily constructed within the PAW method following the DFT + U implementation by Bengone et al. [53]. See Appendix A for a brief technical description of the PAW method for the purpose of implementation of the orbital-polarization Hamiltonian.
As mentioned, Equation (1) is proposed for collinear magnetism with the spin moment pointing in the z direction. This formalism can be generalized to non-collinear magnetism with arbitrary spin orientations by modifying the quadratic energy functional within each muffin-tin radius to favor orbital polarization in the direction of the expectation value of the local self-consistent spin vector. It is then straightforward to propose the following total-energy functional, consistent with a non-collinear generalization of Equation (1),
E D F T   +   O P   =   E D F T     1 2 I E I 3 [ L ¯ I f · S ¯ I f ] 2 S ¯ I f · S ¯ I f
where L ¯ I f and S ¯ I f are expectation values of the angular-momentum and the spin-moment vectors of the f states inside the muffin-tin sphere centered on site I. See the Appendix A for the expressions for L ¯ I f and S ¯ I f within the PAW method.
In addition to our plane-wave calculations, we apply two all-electron methods to compare our pseudopotential results with. First, a full-potential linear muffin-tin orbital (FPLMTO) method [54] that has been detailed [55]. Here, no approximations are applied for the core electrons, unlike the pseudopotential method. The core-electron approximation made in the latter technique is computationally expedient but will cause inaccuracies that are not present in all-electron calculations.
The present implementation does not make any assumptions beyond the GGA. Basis functions, electron densities, and potentials are calculated without any geometrical approximation, and these are expanded in spherical harmonics (with a cut-off Lmax = 8) inside non-overlapping (muffin-tin, MT) spheres surrounding each atom and in Fourier series in the region between these muffin-tin spheres. One has to define an MT sphere with a radius, sMT, and here it is chosen so that sMT/sWS ~ 0.8, where sWS is the Wigner–Seitz (atomic sphere) radius. The radial parts of the basis functions inside the MT spheres are calculated from a wave equation for the L = 0 component of the potential that includes all relativistic corrections including spin–orbit coupling for d and f states, but not for the p states [20]. It should be noted that excluding the p states also removes the strong and artificial dependence of the calculated volumes on the sMT/sWS ratio [2] that is also not present in the exact relativistic treatment (see below).
The orbital polarization is only considered for d and f states. In the actinides, however, the OP contribution from the d states is minimal and ignored in the VASP calculations. The formulation is self-consistent and parameter-free and given in [52]. The self-consistent FPLMTO Racah parameters for the 5f states are employed in the VASP calculations described above. All crystal-structure geometries were relaxed and for neptunium and plutonium, that have more complex phases, we apply a scheme [56] that avoids the necessity of Hellman–Feynman forces that are troublesome to compute.
The number of k points included in the calculations depends on the particular crystal structure, but we generally use ~1000 k points or more for one atom/cell calculations and fewer for cells with many atoms. Each energy eigenvalue is broadened with a Gaussian having a width of 20 mRy.
Second, we employ a full-potential linear augmented plane-wave (FPLAPW) method as implemented in FlapwMBPT (many body perturbation theory) [57]. This approach has many similarities with the FPLMTO method introduced above. As in the FPLMTO method, the space is divided into non-overlapping MT spheres and an interstitial region. The electronic density and effective potential are expanded in spherical harmonics in the MT spheres and in plane waves in the interstitial region (exactly as in the FPLMTO method).
One conceptional difference between FLAPW and the other two methods is that orbital polarization is not applied in the FLAPW calculations. For this reason, Th, Pa, and U were studied with FLAPW, but not Np and Pu where orbital polarization is more important. Another conceptional difference is that FlapwMBPT allows for a complete inclusion of relativistic effects through the four-spinor Dirac equation. Particularly important is that the spin–orbit interaction is here formulated exactly.
Other technical differences between FLAPW and FPLMTO are mostly related to the use of different basis functions in the interstitial region (plane-waves and Hankel functions, respectively) and in the augmentation of them with the functions inside the MT spheres. Details of the implementation of the FLAPW method can be found in [58]. Specific values of the different cut-offs used in the FLAPW calculations are summarized in Table 1. The crystal-structure parameters given in Table 1 are obtained from structural relaxations using the FPLMTO method.

3. Results

The formally correct way to include spin–orbit interaction in an electronic-structure calculation is to solve the four-spinor Dirac equation. Here, we have applied a FPLAPW method that indeed does this (FlapwMBPT [57]), and we regard the corresponding results as the gold standard for our comparisons. We mentioned [20] that utilizing a scalar-relativistic basis set causes inaccuracies for the p states, but it has been suggested that this problem can be circumvented for the actinides by ignoring spin–orbit interaction for these states [20]. This realization has not been widely recognized in studies using plane-wave pseudopotential techniques, and we therefore reiterate this fact by showing our results in Table 2.
Table 2 presents the effect of spin–orbit coupling on the volumes of the actinide elements. For Th, Pa, and U, FPLAW–Dirac calculations provide the reference, while for Np and Pu, that have substantially more complex and large crystal structures, we show results from VASP and FPLMTO. For VASP and FPLMTO the perturbative form of SO is included but for the p states. All three methods give essentially identical results for Th, Pa, and U, suggesting that ignoring spin–orbit interaction for the p states is a very good approximation. The same conclusion was reached in previous studies [59,60] where comparisons were made with the exact muffin-tin orbital method that also solves the four-spinor Dirac equation.
The trend is that spin–orbit coupling is of increasing importance proceeding from thorium to neptunium, causing an expansion of the volumes (Table 2). These metals are all non-magnetic and the explanation for this behavior is straightforward. As mentioned above, the atomic volumes for Th to Np decrease with atomic number in roughly a parabolic fashion that is due to a gradual population of bonding 5f states. No anti-bonding 5f electrons exist because Th to Np all have less than half-filled 5f band. Inclusion of spin–orbit interaction, however, causes some anti-bonding 5f states to be occupied, and these tend to expand the atomic volumes. The reason is that anti-bonding states mix with bonding states as the 5f band is divided into overlapping 5f5/2 and 5f7/2 sub-bands that comprise both bonding and anti-bonding states. The result of this is a reduction of the effective number of bonding electrons and an increase in the atomic volumes (Table 2).
For plutonium, on the other hand, the situation becomes more complicated because here both spin and orbital polarization play important roles as well. In addition, for α-plutonium the crystal and electronic structure correlate sensitively so that the atomic volume cannot be obtained simply from extrapolating the trend established by Th to Np. For plutonium, one must thus carry out accurate electronic-structure calculations, recognizing the magnetic interactions and relaxing the crystal structure, to predict the atomic volume accurately.
Next, we discuss the theory relative to experimental data. In order to do this, we need to establish the experimental volumes at zero temperature to enable a proper comparison with the zero-temperature modeling. Thankfully, Söderlind and Young [61] carefully determined these experimental zero-temperature volumes (V0) for Th, Pa, and U (32.55, 24.72, and 20.47 Å3, respectively). For neptunium we use the experimental linear coefficient of thermal expansion (27 × 10−6 K−1) [62] combined with the quasi-harmonic Debye–Grüneisen model [4] to back out V0 (18.9 Å3). For α-plutonium the Debye–Grüneisen procedure is inaccurate because the temperature dependence of the volume is highly anomalous at low temperatures. At temperatures close to 50 K, there is negative thermal expansion observed in dilatation experiments [63]. This anomaly was proposed to be due to magnetism [63], and this speculation is plausible because the negative thermal expansion observed in δ-plutonium is explained from first-principles theory by magnetic interactions [40]. Here, we extract V0 (19.53 Å3) for α-plutonium from a linear extrapolation, from the three lowest temperatures, to zero temperature of the dilatation data shown in Figure 1. We compare our VASP results, that include spin–orbit interaction and orbital polarization, with the experimental V0 values in Figure 2. The agreement is very good and almost as good as all-electron (FPLMTO) data that also include spin–orbit coupling and orbital polarization [24]. The small differences are likely due to the PAW method used in VASP.
We assess the pseudopotential approximation in Figure 3 where scalar-relativistic VASP and FPLMTO atomic volumes are compiled. Notice that the all-electron FPLMTO volumes are slightly larger, as are the FPLAPW volumes (not shown), but overall the agreement is quite good. For α-plutonium the difference is more significant but, in this case, when spin–orbit and orbital polarization are included, the agreement between the methods improves. In our judgement, the VASP pseudopotential is very reasonable for Th to Pu.
We thus have a model (DFT + SO + OP), that reproduces the equilibrium volumes for the actinides very accurately. The parabolic behavior of the volumes is duplicated as well as the upturn observed between Np and Pu. The upturn for plutonium is due to several effects: Crystal structure, spin–orbit coupling, orbital polarization, and formation of magnetic moments. The present model does not depend on an ad hoc Hubbard U parameter. Actually, introducing such a parameter in a DFT + U approach invokes physics that is inappropriate for these metals, unless the parameter is very small and inconsequential. To illustrate this, we performed VASP DFT + U calculations that include spin–orbit interaction with the proper exclusion of the p states, as discussed. In Figure 4 we show these results that suggest an over-estimation of all the volumes, except for thorium. Accounting for the fact that the pseudopotential approximation tends to slightly under-estimate the volume (Figure 3), the conclusion from Figure 4 is that the DFT + U volumes are decidedly too large and worse than those of the treatment without a U (Figure 2). The overall effect of the applied U is here relatively small, cf. Figure 2 and Figure 4, because we investigate a very small U (0.4 eV). Using the more common and larger value of U (~1 eV) exacerbates this over-estimation problem for the volumes, while adopting a larger U (>4 eV), often applied for δ-plutonium, causes wholly unrealistic volumes for all the actinides (including δ-plutonium).
Another very obvious sign of the improper physics that the Hubbard U parameter enforces is found in the prediction of the ground-state phases. For plutonium, DFT + U predicts the wrong ground state, even for the very small U we have adopted in this study (0.4 eV). In Figure 5 we show our fully (both structural and magnetic-configurational) relaxed DFT + U calculations for α- and δ-plutonium. Notice that the δ-phase energy is about 7 mRy (per atom) lower than the α phase. The fact that the δ phase is predicted to be the ground state when a large U (~ 4 eV) is employed has been discussed [40], but it is remarkable that even a very small U promotes the wrong ground state. Actually, the two phases are energetically degenerate for a small U ~ 0.2 eV. Here, both the α and δ volumes are significantly under-estimated (18.74 and 24.25 Å3, respectively). We find that increasing U aggravates the problem and further increases the stability of δ over α (not shown). We emphasize that a theory assuming no ad hoc Coulomb repulsion (U = 0) but orbital polarization and careful relaxation of all degrees of freedom reproduces the correct ground state in accordance with previous conclusions [18,40].

4. Summary and Conclusions

We conducted DFT and DFT + U calculations for the purpose of evaluating the potential need for an explicit Hubbard U intra-atomic Coulomb repulsion for the actinide metals Th to Pu. We limit our study to the α phases of these metals (except for δ-plutonium) and find that one carefully needs to address several key approximations in the theory in order to reach a definite conclusion.
First, the spin–orbit interaction has to be introduced in an appropriate fashion. Based on comparisons with Dirac–FPLAPW calculations that include spin–orbit interaction exactly, we recommend a way to accurately account for SO interaction without having to solve the spin-polarized Dirac equation. Namely, by excluding this interaction on the p states, one can accurately apply the usual scalar-relativistic Schrödinger-type equation with perturbative spin–orbit coupling [64] as implemented in VASP and other codes.
Second, one has to make sure that the pseudopotential employed in plane-wave methods is a good representation of the core electrons. We have confirmed that this is the case here by comparisons with results from all-electron codes. The most accurate result is obviously obtained from all-electron approaches, however.
Third, the crystal structures need to be relaxed (i.e., optimized so that the lowest energy is obtained). This is particularly important for α-plutonium because of the sensitive correlation between its crystal and electronic structure. The plutonium computations we have performed are thus non-trivial because forces are required for structural relaxations and these are troublesome to evaluate in the presence of strong spin–orbit and orbital–orbital coupling.
The conclusion is that DFT, with the GGA for the electron exchange and correlations, is sufficient for all studied actinide metals (no Hubbard U needed). Recently, numerous others came to the same conclusion [65,66,67,68] for uranium. For plutonium, however, treating the orbital–orbital interaction is necessary for a good electronic structure, total energy, and magnetic form factor [69]. Importantly, we show that DFT + U (U > 0.2 eV) for plutonium predicts the wrong ground-state phase. Because DFT + U defines the static limit of dynamical-mean field theory, that incorporates similar electron correlations, it seems unavoidable that it is also inappropriate for plutonium.

Author Contributions

B.S. and P.S. conceived the study. B.S., P.S., and A.K. performed electronic-structure calculations. All authors helped writing the paper.

Acknowledgments

We thank J.M. Wills and D.A. Young for helpful discussions. This work was performed under the auspices of the U.S. DOE by LLNL under Contract DE-AC52-07NA27344 and was partly funded by the Laboratory Directed Research and Development Program at LLNL under Project Tracking Code No. 17-ERD-041. The work of A.K. was supported by the U.S. DOE, Office of Science, Basic Energy Sciences as a part of the Computational Materials Science Program.

Conflicts of Interest

The authors declare no conflict of interest.

Appendix A

In the PAW method, the all-electron crystal wave function | Ψ k n   is expressed in terms of a soft pseudo-wave function |   Ψ ˜ k n usually expanded in a plane-wave basis set and all-electron and pseudo-atomic partial waves | ϕ ilm   and   | ϕ ˜ ilm localized near the nuclei as follows,
| Ψ k n   =   | Ψ ˜ k n   +   i l m ( | ϕ i l m     | ϕ ˜ i l m ) p ˜ i l m | Ψ ˜ k n .
Here, the crystal wave function indices k,n refer to the Bloch wave vector and band index, while the partial wave expansion indices l,m refer to the atomic angular momentum quantum numbers, and the index i enumerates the number of l-channels used in the representation of the crystal wave function (Equation (A1)). Note that the pseudo-atomic partial wave functions are constructed such that outside the atomic muffin-tin radius r c they are equal to the all-electron partial wave functions,
  ϕ i l m ( r )   =   ϕ ˜ i l m ( r )   for   | r |   >   | r c |
The projector functions | p ˜ ilm in Equation (A1) are constructed in such a way that the following relation holds
p ˜ i l m | ϕ ˜ i l m   =   δ i , i δ l , l δ m , m .
The above integrations over the projector functions and the pseudo-partial wave functions are conducted within r c . The PAW method is exact if the projector functions and the pseudo-atomic partial wave functions constitute a complete basis expansion for the crystal wave function in the muffin-tin radius near each nucleus, i.e.,
i l m | ϕ ˜ i l m p ˜ i l m |   =   1 .
It is easy to see that the above assumption of completeness can become questionable without explicit addition of the p 1 / 2 -orbitals in the partial-wave expansion of the crystal wave function inside r c , when relativistic corrections are added to the scalar-relativistic equations.
Nevertheless, the PAW equations are derived under the assumption of Equation (A4). As a result, the expectation value of any local operator   B ^ confined to the muffin-tin sphere around a nucleus can be simply expressed as follows
Ψ k n | B ^ | Ψ k n   =   i l m , i l m Ψ ˜ k n | p ˜ i l m ϕ i l m | B ^ | ϕ i l m p ˜ i l m | Ψ ˜ k n .
Finally, when dealing with non-collinear magnetism, the crystal wave functions acquire an extra dimension and become spinor-wave functions Ψ ˜ k n τ , with τ now indexing the two spinor components.
We are now in a position to derive the expression for the expectation value of any component (α = x, y, z) of the local angular-momentum operator L α f that acts on the f electrons within an atomic sphere. It can be written as
L α f   =   i j ϕ 3 i | ϕ 3 j m , m 3 m | L ^ α | 3 m k n τ f k , n   Ψ ˜ k n τ | p ˜ 3 i m p ˜ 3 j m   Ψ ˜ k n τ
Here, ϕ 3 i | ϕ 3 j   is the radial overlap integral within the muffin-tin radius between two all-electron partial wave f-orbitals, 3 m |   L ^ α | 3 m is the spherical-harmonics representation of the angular momentum operator in the subspace of the f-orbitals, and f k n are the partial occupations of the crystal wave functions. The expectation values of the spin moment components S α f in the atomic sphere around a nucleus can also be derived similar to Equation (A6). It can be written as
S α f   =   i j , m ϕ I , 3 i | ϕ I , 3 j τ τ σ α τ τ   k n f k , n   Ψ ˜ k n τ | p ˜ 3 i m   p ˜ 3 j m   Ψ ˜ k n τ
where σ α τ τ is the Pauli spin matrix in the α direction. The corresponding self-consistent equations are constructed from functional differentiations of Equation (2) with respect to the pseudo spinor wave functions Ψ ˜ k n τ and occupations f k , n .

References

  1. Skriver, H.L.; Andersen, O.K.; Johansson, B. Calculated bulk properties of the actinide metals. Phys. Rev. Lett. 1978, 41, 42. [Google Scholar] [CrossRef]
  2. Johansson, B.; Skriver, H.L. Electronic structure of the actinide metals. J. Magn. Magn. Mater. 1982, 29, 217–229. [Google Scholar] [CrossRef]
  3. Brooks, M.S.S.; Johansson, B.; Skriver, H.L. Electronic Structure and Bulk Ground State Properties of the Actinides in Handbook on the Physics and Chemistry of the Actinides Vol. 1; North-Holland: Amsterdam, The Netherlands, 1984. [Google Scholar]
  4. Söderlind, P.; Nordström, L.; Yongming, L.; Johansson, B. Relativistic effects on the thermal expansion of the actinide elements. Phys. Rev. B 1990, 42, 4544. [Google Scholar] [CrossRef] [PubMed]
  5. Wills, J.M.; Eriksson, O. Crystal-structure stabilities and electronic structure for the light actinides Th, Pa, and U. Phys. Rev. B 1992, 45, 13879. [Google Scholar] [CrossRef]
  6. Söderlind, P.; Eriksson, O.; Johansson, B.; Wills, J.M. Electronic properties of f-electron metals using the generalized gradient approximation. Phys. Rev. B 1994, 50, 7291. [Google Scholar] [CrossRef]
  7. Pénicaud, M. New muffin tin orbital band calculations of equilibrium properties and electronic structure of actinide metals. J. Alloys Compd. 1994, 213–214, 410–413. [Google Scholar] [CrossRef]
  8. Söderlind, P.; Wills, J.M.; Johansson, B.; Eriksson, O. Structural properties of plutonium from first-principles theory. Phys. Rev. B 1997, 55, 1997. [Google Scholar] [CrossRef]
  9. Vitos, L.; Kollár, J.; Skriver, H.L. Ab initio full charge-density study of the α phase Fr, Ra, Ac, Th, Pa, U, Np, and Pu. Phys. Rev. B 1997, 55, 4947. [Google Scholar] [CrossRef]
  10. Kollár, J.; Vitos, L.; Skriver, H.L. Anomalous atomic volume of α-Pu. Phys. Rev. B 1997, 55, 15353. [Google Scholar] [CrossRef]
  11. Söderlind, P. Theory of the crystal structures of cerium and the light actinides. Adv. Phys. 1998, 47, 959–998. [Google Scholar] [CrossRef]
  12. Pénicaud, M. Calculated equilibrium properties, electronic structures and structural stabilities of Th, Pa, U, Np, and Pu. J. Phys. Condens. Matter 2000, 12, 5819. [Google Scholar] [CrossRef]
  13. Wang, Y.; Sun, Y. First-principles thermodynamic calculations for δ-Pu and Ɛ-Pu. J. Phys. Condens. Matter 2000, 12, L311. [Google Scholar] [CrossRef]
  14. Söderlind, P. Ambient pressure phase diagram of plutonium: A unified theory for α-Pu and δ-Pu. Europhys. Lett. 2001, 55, 525. [Google Scholar] [CrossRef]
  15. Söderlind, P.; Landa, A.; Sadigh, B. Density-functional investigation of magnetism in δ-Pu. Phys. Rev. B 2002, 66, 205109. [Google Scholar] [CrossRef]
  16. Robert, G.; Pasturel, A.; Siberchicot, B. Calculated thermodynamic properties of plutonium metal. J. Phys. Condens. Matter 2003, 15, 8377. [Google Scholar] [CrossRef]
  17. Kutepov, A.L.; Kutepova, S.G. First-principles study of electronic and magnetic structure of alpha-Pu, delta-Pu, americium, and curium. J. Magn. Magn. Mater. 2004, 272, E329–E330. [Google Scholar] [CrossRef]
  18. Söderlind, P.; Sadigh, B. Density-functional calculations for α, β, γ, δ, δ’, and Ɛ plutonium. Phys. Rev. Lett. 2004, 92, 185702. [Google Scholar] [CrossRef]
  19. Kuneš, J.; Novák, P.; Schmid, R.; Blaha, P.; Schwarz, K. Electronic structure of fcc Th: Spin-orbit calculations with 6p1/2 local orbital extension. Phys. Rev. B 2001, 64, 153102. [Google Scholar] [CrossRef]
  20. Nordström, L.; Wills, J.M.; Andersson, P.H.; Söderlind, P.; Eriksson, O. Spin-orbit coupling in the actinide elements: A critical evaluation of theoretical equilibrium volumes. Phys. Rev. B 2000, 63, 035103. [Google Scholar] [CrossRef]
  21. Bouchet, J.; Jomard, G. Lattice dynamics and thermodynamics of light actinides. J. Alloy. Compd. 2007, 444–445, 271–273. [Google Scholar] [CrossRef]
  22. Bouchet, J. Lattice dynamics of α uranium. Phys. Rev. B 2008, 77, 024113. [Google Scholar] [CrossRef]
  23. Taylor, C.D. Evaluation of first-principles techniques for obtaining materials parameters of α-uranium and the (001) α-uranium surface. Phys. Rev. B 2008, 77, 094119. [Google Scholar] [CrossRef]
  24. Söderlind, P.; Kotliar, G.; Haule, K.; Oppeneer, P.M.; Guillaumont, D. Computational modeling of actinide materials and complexes. MRS. Bull. 2010, 35, 883–888. [Google Scholar] [CrossRef]
  25. Bouchet, J.; Albers, R.C. Elastic properties of the light actinides at high pressure. J. Phys. Condens. Matter 2011, 23, 215402. [Google Scholar] [CrossRef]
  26. Bouchet, J.; Bottin, F. High-temperature and high-pressure phase transition in uranium. Phys. Rev. B 2017, 85, 054113. [Google Scholar] [CrossRef]
  27. Friedel, J. The Physics of Metals; Ziman, J.M., Ed.; Cambridge Univ. Press: New York, NY, USA, 1969. [Google Scholar]
  28. Bouchet, J.; Siberchicot, B.; Jollet, F.; Pasturel, A. Equilibrium properties of δ-Pu: LDA + U calculations (LDA ≡ local density approximation). J. Phys. Condens. Matter 2000, 12, 1723. [Google Scholar] [CrossRef]
  29. Lukoyanov, A.V.; Shorikov, A.O.; Bystrushkin, V.B.; Dyachenko, A.A.; Kabirova, L.R.; Tsiovkin, Y.Y.; Povzner, A.A.; Dremov, V.V.; Korotin, M.A.; Anisimov, V.I. Electronic structure and magnetic state of transuranium metals under pressure. J. Phys. Condens. Matter 2010, 22, 495501. [Google Scholar] [CrossRef]
  30. Xie, W.; Xiong, W.; Marianetti, C.A.; Morgan, D. Correlation and relativistic effects in U metal and U-Zr alloy: Validation of ab initio approaches. Phys. Rev. B 2013, 88, 235128. [Google Scholar] [CrossRef]
  31. Lukoyanov, A.V.; Zaminev, M.O.; Anisimov, V.I. Pressure-induced modification of the electronic structure of metallic thorium. JETP 2014, 118, 148–152. [Google Scholar] [CrossRef]
  32. Xiong, W.; Xie, W.; Morgan, D. Thermodynamic evaluation of the Np-Zr system using CALPHAD and ab initio methods. J. Nucl. Mater. 2014, 452, 569–577. [Google Scholar] [CrossRef]
  33. Xie, W.; Chang, A.Y.; Morgan, D. Ab initio energetics for modeling of phase stability of the Np-U system. J. Nucl. Mater. 2016, 479, 260–270. [Google Scholar] [CrossRef] [Green Version]
  34. Noordhoek, M.J.; Besmann, T.M.; Anderson, D.; Middleburgh, S.C.; Chernatynskiy, A. Phase equilibria in the U-Si system from first-principles calculations. J. Nucl. Mater. 2016, 479, 216–223. [Google Scholar] [CrossRef] [Green Version]
  35. Amadon, B. First-principles DFT+DMFT calculations of structural properties of actinides: Role of Hund’s exchange, spin-orbit coupling, and crystal structure. Phys. Rev. B 2016, 94, 115148, Erratum in 2018, 97, 039903(E). [Google Scholar] [CrossRef]
  36. Dorado, B.; Bottin, F.; Bouchet, J. Phonon spectra of plutonium at high temperatures. Phys. Rev. B 2017, 95, 104303. [Google Scholar] [CrossRef]
  37. Zhang, C.B.; Li, X.P.; Li, W.D.; Zhang, P.; Yin, W.; Wang, F.; Bao-Tian Wang, B.T. Structural, electronic, and elastic properties of equiatomic UZr alloys from first-principles. J. Nucl. Mater. 2017, 496, 333–342. [Google Scholar] [CrossRef]
  38. Amadon, B.; Dorado, B. A unified and efficient theory for the structural properties of actinides and phases of plutonium. J. Phys. Condens. Matter 2018, 30, 405603. [Google Scholar] [CrossRef]
  39. Qiu, R.; Ao, B.; Huang, L. Effective Coulomb interaction in actinides from linear response approach. Comput. Mater. Sci. 2020, 171, 109270. [Google Scholar] [CrossRef]
  40. Söderlind, P.; Landa, A.; Sadigh, B. Density-functional theory for plutonium. Adv. Phys. 2019, 68, 1. [Google Scholar] [CrossRef]
  41. Söderlind, P.; Sadigh, B.; Lordi, V.; Landa, A.; Turchi, P.E.A. Electron correlation and relativity of the 5f electrons in the U-Zr alloy system. J. Nucl. Mater. 2014, 444, 356–358. [Google Scholar] [CrossRef] [Green Version]
  42. Hohenberg, P.; Kohn, W. Inhomogeneous electron gas. Phys. Rev. 1964, 136, B864–B871. [Google Scholar] [CrossRef] [Green Version]
  43. Kohn, W.; Sham, L. Self-consistent equations including exchange and correlation effects. Phys. Rev. 1965, 140, A1133–A1138. [Google Scholar] [CrossRef] [Green Version]
  44. Perdew, J.P.; Burke, K.; Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 1996, 77, 3865. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  45. Donohue, J. The Structures of the Elements; John Wiley & Sons: New York, NY, USA, 1974. [Google Scholar]
  46. Söderlind, P.; Yang, L.H. Phonon density of states for α-plutonium from density-functional theory. Sci. Rep. 2019. accepted. [Google Scholar]
  47. Söderlind, P. Quantifying the importance of orbital over spin correlations in δ-Pu from density functional theory. Phys. Rev. B 2008, 77, 085101. [Google Scholar] [CrossRef]
  48. Blöchl, P.E. Projector augmented-wave method. Phys. Rev. B 1994, 50, 17953. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  49. Kresse, G.; Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 1996, 54, 11169. [Google Scholar] [CrossRef] [PubMed]
  50. Kresse, G.; Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 1999, 59, 1758. [Google Scholar] [CrossRef]
  51. Dudarev, S.; Botton, G. Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study. Phys. Rev. B 1998, 57, 1505. [Google Scholar] [CrossRef]
  52. Eriksson, O.; Brooks, M.S.S.; Johansson, B. Orbital polarization in narrow-band systems: Application to volume collapses in light lanthanides. Phys. Rev. B 1990, 41, 7311–7314. [Google Scholar] [CrossRef]
  53. Bengone, O.; Alouani, M.; Blöchl, P.; Hugel, J. Implementation of the projector augmented-wave LDA+U method: Application to the electronic structure of NiO. Phys. Rev. B 2000, 62, 16392. [Google Scholar] [CrossRef] [Green Version]
  54. Lejaeghere, K.; Bihlmayer, G.; Björkman, T.; Blaha, P.; Blügel, S.; Blum, V.; Caliste, D.; Castelli, I.E.; Clark, S.J.; Dal Corso, A. Reproducibility in density functional theory calculations for solids. Science 2016, 351, 3000. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  55. Wills, J.M.; Alouani, M.; Andersson, P.; Delin, A.; Eriksson, O.; Grechnyev, O. Full-Potential Electronic Structure Method; Springer Series in Solid-State Science; Springer: Berlin/Heidelberg, Germany, 2010; Volume 167. [Google Scholar]
  56. Söderlind, P.; Grabowski, B.; Yang, L.; Björkman, T.; Souvatzis, P.; Eriksson, O. High-temperature phonon stabilization of γ-uranium from relativistic first-principles theory. Phys. Rev. B 2012, 85, 060301. [Google Scholar] [CrossRef] [Green Version]
  57. FlapwMBPT. Available online: https://www.bnl.gov/cmpmsd/flapwmbpt/ (accessed on 1 November 2019).
  58. Kutepov, A.L.; Kutepova, S.G. The ab initio ground state properties and magnetic structure of plutonium. J. Phys. Condens. Matter 2003, 15, 2607. [Google Scholar] [CrossRef]
  59. Landa, A.; Söderlind, P. Relativistic effects on the equation of state of the light actinides. In MRS Online Proceedings Library Archive, Proceedings of the Actinides 2005—Basic Science, Application and Technology, Boston, MA, USA, 28 November–1 December 2005; Sarrao, J.L., Schwartz, A.J., Antonio, M.R., Burns, P.C., Haire, R.G., Nitsche, N., Eds.; 0893-JJ01-09; Materials Research Society: Warrendale, PA, USA, 2006; Volume 893, pp. 51–56. [Google Scholar]
  60. Landa, A.; Söderlind, P.; Turchi, P.E.A.; Vitos, L.; Ruban, A. Density-functional study of Zr-based actinide alloys: 2. U-Pu-Zr system. J. Nucl. Mater. 2009, 393, 141–145. [Google Scholar] [CrossRef]
  61. Söderlind, P.; Young, D.A. Assessing density-functional theory for equation-of-state. Computation 2018, 6, 13. [Google Scholar] [CrossRef] [Green Version]
  62. Cort, B. Thermal expansion of neptunium. J. Less Comm. Met. 1987, 135, L13. [Google Scholar] [CrossRef]
  63. Lallement, R. Dilatation et pouvoir thermoelectrique du plutonium α basse temperature. J. Phys. Chem. Solids 1963, 24, 1617–1624. [Google Scholar] [CrossRef]
  64. Andersen, O.K. Linear methods in band theory. Phys. Rev. B 1975, 12, 3060. [Google Scholar] [CrossRef] [Green Version]
  65. Migdal, K.P.; Yanilkin, A.V. Polymorph transitions in uranium at low temperatures: First-principles investigation. Model. Simul. Mater. Sci. Eng. 2018, 26, 025009. [Google Scholar] [CrossRef]
  66. Mei, Z.-G.; Yacout, A.M. First-principles study of structural, elastic, electronic, vibrational and thermodynamic properties of uranium aluminides. Comput. Mater. Sci. 2019, 158, 26–31. [Google Scholar] [CrossRef]
  67. Rafi, M.; Iasir, M.; Hammond, K.D. Pseudopotential for plane-wave density functional theory studies of metallic uranium. Comput. Mater. Sci. 2020, 171, 109221. [Google Scholar]
  68. Mei, Z.-G.; Yacout, A.M. First-principles study of surface properties of crystalline and amorphous uranium aluminides. Appl. Surf. Sci. 2020, 502, 144132. [Google Scholar] [CrossRef]
  69. Söderlind, P.; Zhou, F.; Landa, A.; Klepeis, J.E. Phonon and magnetic structure in δ-plutonium from density-functional theory. Sci. Rep. 2015, 5, 15958. [Google Scholar] [CrossRef] [PubMed]
Figure 1. Experimental temperature dependence of the atomic volume for α-plutonium. Redrawn from [63] and assuming that the room-temperature (300 K) atomic volume is 20.0 Å3. The 0 K value is obtained from a linear extrapolation from the three lowest temperatures (red line).
Figure 1. Experimental temperature dependence of the atomic volume for α-plutonium. Redrawn from [63] and assuming that the room-temperature (300 K) atomic volume is 20.0 Å3. The 0 K value is obtained from a linear extrapolation from the three lowest temperatures (red line).
Applsci 09 05020 g001
Figure 2. Experimental (T = 0, see main text) and DFT (VASP) atomic volumes (Å3). The calculations include spin–orbit coupling (not on p states) and for Pu also orbital polarization.
Figure 2. Experimental (T = 0, see main text) and DFT (VASP) atomic volumes (Å3). The calculations include spin–orbit coupling (not on p states) and for Pu also orbital polarization.
Applsci 09 05020 g002
Figure 3. Scalar-relativistic (no spin–orbit coupling) atomic volumes for Th to Pu calculated with VASP and FPLMTO.
Figure 3. Scalar-relativistic (no spin–orbit coupling) atomic volumes for Th to Pu calculated with VASP and FPLMTO.
Applsci 09 05020 g003
Figure 4. Experimental (T = 0, see main text) and DFT + U (VASP) atomic volumes (Å3) for the actinides. The calculations include a Hubbard U = 0.4 eV and spin–orbit coupling (not on p states) but no orbital polarization.
Figure 4. Experimental (T = 0, see main text) and DFT + U (VASP) atomic volumes (Å3) for the actinides. The calculations include a Hubbard U = 0.4 eV and spin–orbit coupling (not on p states) but no orbital polarization.
Applsci 09 05020 g004
Figure 5. DFT + U (VASP) total energies for α- and δ-plutonium. The calculations include a Hubbard U = 0.4 eV and spin–orbit coupling (not on p states) but no orbital polarization. The dashed lines are guides to the eye only.
Figure 5. DFT + U (VASP) total energies for α- and δ-plutonium. The calculations include a Hubbard U = 0.4 eV and spin–orbit coupling (not on p states) but no orbital polarization. The dashed lines are guides to the eye only.
Applsci 09 05020 g005
Table 1. Structural parameters and cut-offs for the calculations with FlapwMBPT. Ψ represents the wave function, ρ the electronic density, and VKS the Kohn–Sham potential. Basis-set size corresponds to the fully relativistic calculations. For the scalar-relativistic approach, the size is half.
Table 1. Structural parameters and cut-offs for the calculations with FlapwMBPT. Ψ represents the wave function, ρ the electronic density, and VKS the Kohn–Sham potential. Basis-set size corresponds to the fully relativistic calculations. For the scalar-relativistic approach, the size is half.
ElementThPaU
StructureFace-Centered CubicBody-Centered TetragonalOrthorhombic
b/aN/AN/A2.068
c/aN/A0.821.74
yN/AN/A0.1017
Basis set for Ψ 596–642404–4601000–1048
Plane waves in the interstitial for ρ/VKS96512631541
Lmax in MT for Ψ101010
Lmax in MT for ρ/VKS666
k-point mesh12 × 12 × 1212 × 12 × 1212 × 12 × 8
Table 2. Density-functional-theory relative expansion (%) of the atomic volume due to inclusion of spin–orbit (SO) coupling, (VSO-VNo-SO)/VSO. For full-potential linear augmented plane-wave (FPLAPW), SO is included exactly via the Dirac equation, while for full-potential linear muffin-tin orbital (FPLMTO) and Vienna ab initio simulation package (VASP), a scalar-relativistic basis set is used with perturbative SO that is ignored for the p states. For plutonium, orbital polarization is important and therefore included.
Table 2. Density-functional-theory relative expansion (%) of the atomic volume due to inclusion of spin–orbit (SO) coupling, (VSO-VNo-SO)/VSO. For full-potential linear augmented plane-wave (FPLAPW), SO is included exactly via the Dirac equation, while for full-potential linear muffin-tin orbital (FPLMTO) and Vienna ab initio simulation package (VASP), a scalar-relativistic basis set is used with perturbative SO that is ignored for the p states. For plutonium, orbital polarization is important and therefore included.
ElementFPLAPWFPLMTOVASP
Th0.120.020.02
Pa0.530.500.57
U1.401.331.40
NpN/A2.302.16
PuN/A3.55 *5.50 *
Note: * includes spin–orbit coupling and orbital polarization.

Share and Cite

MDPI and ACS Style

Sadigh, B.; Kutepov, A.; Landa, A.; Söderlind, P. Assessing Relativistic Effects and Electron Correlation in the Actinide Metals Th to Pu. Appl. Sci. 2019, 9, 5020. https://doi.org/10.3390/app9235020

AMA Style

Sadigh B, Kutepov A, Landa A, Söderlind P. Assessing Relativistic Effects and Electron Correlation in the Actinide Metals Th to Pu. Applied Sciences. 2019; 9(23):5020. https://doi.org/10.3390/app9235020

Chicago/Turabian Style

Sadigh, Babak, Andrey Kutepov, Alexander Landa, and Per Söderlind. 2019. "Assessing Relativistic Effects and Electron Correlation in the Actinide Metals Th to Pu" Applied Sciences 9, no. 23: 5020. https://doi.org/10.3390/app9235020

APA Style

Sadigh, B., Kutepov, A., Landa, A., & Söderlind, P. (2019). Assessing Relativistic Effects and Electron Correlation in the Actinide Metals Th to Pu. Applied Sciences, 9(23), 5020. https://doi.org/10.3390/app9235020

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop