Power networks

From OpenStreetMap Wiki
(Redirected from WikiProject Power networks)
Jump to navigation Jump to search

broom

This page is being considered for cleanup. Please discuss this page.
Not sure what help it is having this page and Power. I suggest merging them.
Transmission lines in Memphis, TN with some pylons

This is a project to map and document all power networks on the planet. This could be power lines, tower and substations. But also gas or oil lines.

To view guidelines regarding power generation see power generation page.

Mapping power networks is very useful for navigation, particularly for overhead lines.

If you are a power user, why not join the category:power user.

There is an IRC channel for discussing power networks and other infrastructure: irc.oftc.net #osm-infrastructure.

Electric power

Physical components

HVDC lines

An HVDC is a power line where for transmission DC instead of AC is used. As DC cannot be transformed like AC, AC has to be transformed to the desired voltage level, rectified and at the end of the line converted into AC again. As this requires expensive equipment the use of DC for power transmission is normally done only in the following case:

  • interconnecting power grids of different frequencies or phase counts or which are not synchronized
  • very long ( > 500 km) overhead lines
  • very long ( > 50 km) cables

For the first case also plants are used, in which the conversion process into DC and back again into AC is done in the same plant. One calls these plants "back-to-back stations".

HVDC transmissions are either monopolar or bipolar. At a monopolar transmission one pole is grounded and sometimes even the ground is used as second conductor while the other has a high potential against ground. At bipolar lines one pole has positive potential to ground and the other negative. The ground or a conductor grounded at a single point, which is called metallic return, is used as common return of both poles.

The location of grounding points, which can be situated on land or in the sea, must be chosen very carefully, in order to prevent electrochemical corrosion. Therefore lines, the such called electrode lines, between the grounding point and the converter stations are required. The voltage level of these lines is not constant. It is the product of line current and ground resistance plus resistance of electrode line. In ideal systems it would be o volts, but in practice it may got values until 2 kV.

Electrode lines can be realized as overhead line or as underground cable. They can be installed on separate towers or use the towers carrying the high-voltage pole(s) of the HVDC transmission where they can, as they run to ground, also serve as ground conductor, whereby they have to be fixed on insulators equipped with lightning arrestors. In some cases (HVDC Pacific-Intertie, HVDC CU, HVDC Square Butte and HVDC Vancouver Island), the electrode line is installed on towers of an AC line. The installation of conductors of the high voltage poles of DC lines on AC towers was so far only realized in the switchyard of HVDC Volgograd-Donbass at Volgograd and at HVDC Kontiskan at Stenkullen, Sweden, whereby latter towers do not exist any more. However in China HVDC Hubei - Shanghai and HVDC Gezhouba - Shanghai, use in most part of its length the same towers.

As switches for HVDC are poorly available, so far HVDC is used nearly only for point-to-point transmissions and most realized systems consist of just 2 stations interconnected by the line. There are also a few multiterminal transmissions, but at no realized scheme more than 2 HVDC lines depart.

A good list of HVDC schemes can be found on list of HVDC projects. Most of these schemes are mapped at least in overhead sections already on OpenStreetMap. However no map of all existing HVDC schemes exist in the internet as there are no detailed maps of all schemes or groups of schemes.

Tags

The full list of power-related tags can be found on the power=* page.

You may find side information regarding socket=* or power_supply=*.

Proposals

Rendering

The world on Open Infrastructure Map

Open Infrastructure Map renders electricity, telecommunications, water, petroleum, and microwave communications infrastructure, also features a similar rendering of power lines in one of its overlays, Names of substations and their highest voltage, and power plants are also indicated.

Another visualization can be seen at Flosm.de.

MapCSS style

A mapCSS stylesheet is available for josm.

Oil and gas power

Open Infrastructure Map shows man_made=pipeline and substance=* on ways and areas.

Pipelines

  • man_made=pipeline "Here is a pipeline"
  • location=* underground|underwater|overground (optional)
  • substance=value This can be <water|oil|gas|sewage|any substance> (optional)
  • operator=name <name of the company operating the pipeline> (optional)
Abkürzung Name der Pipeline Marker von - Marker bis osm data Kommentar
NWO Nord-West-Oelleitung 19,34,36,37 way 30780560
RRB [Rohrleitung Rostock Böhlen] 690-692 way 35103657 Quellen: [1]

Substations

See pipeline=substation for any facility involving pipelines for inspection, compression or storage

Proposals

Local projects

power network in Germany. Created with special Kosmos rendering rules.

Local projects intend to document practices, knowledge and mapping guidelines relevant for a particular area in the world only. Feel free to create a dedicated one for your region if missing. Such page should only cover particular area (like countries or region) but not a given infrastructure or facility for sake of consistency.

See also