[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Top > IJAT > Digital Tools Integration and Human Resources Development for ...

single-au.php

IJAT Vol.16 No.3 pp. 250-260
doi: 10.20965/ijat.2022.p0250
(2022)

Paper:

Views over last 60 days: 708

Digital Tools Integration and Human Resources Development for Smart Factories

Hiroyuki Sawada*,†, Yoshihiro Nakabo**, Yoshiyuki Furukawa*, Noriaki Ando**, Takashi Okuma***, Hitoshi Komoto*, and Keijiro Masui*

*Industrial Cyber-Physical Systems Research Center, National Institute of Advanced Industrial Science and Technology (AIST)
2-3-26 Aomi, Koto-ku, Tokyo 135-0064, Japan

†Corresponding author

**Industrial Cyber-Physical Systems Research Center, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan

***Human Augmentation Research Center, National Institute of Advanced Industrial Science and Technology (AIST), Kashiwa, Japan

Received:
October 25, 2021
Accepted:
February 24, 2022
Published:
May 5, 2022
Creative Commons License
Keywords:
smart manufacturing, robot system, human behavior sensing, human-machine coexistence, model factory
Abstract

Promoting digital transformation (DX) and realizing smart factories have become critical for manufacturing companies to meet increasing demands such as short-term delivery, quality assurance, and environmental, social, and corporate governance (ESG) as well as to improve productivity and quality of work (QoW). To this end, digital tools should be provided for practical application in the preparation of the environments in which the companies can learn and study how to use digital technologies and tools by trial and error, while developing human resources for utilizing them for their own problem solving. In this paper, we describe the activities we used to develop various digital tools in the fields of manufacturing, robotics, and service engineering. We integrated these into a cyber physical system (CPS) developed for our model factory and offered a course for the company workers to learn these digital technologies. We also planned to develop our activities in collaboration with companies, universities, and other research institutes.

Cite this article as:
H. Sawada, Y. Nakabo, Y. Furukawa, N. Ando, T. Okuma, H. Komoto, and K. Masui, “Digital Tools Integration and Human Resources Development for Smart Factories,” Int. J. Automation Technol., Vol.16 No.3, pp. 250-260, 2022.
Data files:
References
  1. [1] Ministry of Economy, Trade and Industry, Ministry of Health, Labour and Welfare, and Ministry of Education, Culture, Sports, Science and Technology, “White Paper on Monozukuri 2021,” 2021 (in Japanese).
  2. [2] I. Nishida, R. Tsuyama, K. Shirase, M. Onishi, and K. Koarashi, “Development of Innovative Intelligent Machine Tool Based on CAM-CNC Integration Concept – Adaptive Control Based on Predicted Cutting Force –,” Int. J. Automation Technol., Vol.13, No.3, pp. 373-381, doi: 10.20965/ijat.2019.p0373, 2019.
  3. [3] I. Nishida, H. Nakatsuji, and K. Shirase, “Automated Tool Path Generation for Roughing Using Flat Drill,” Int. J. Automation Technol., Vol.14, No.6, pp. 1036-1044, doi: 10.20965/ijat.2020.p1036, 2020.
  4. [4] I. Nishida and K. Shirase, “Automated Process Planning System for End-Milling Operation by CAD Model in STL Format,” Int. J. Automation Technol., Vol.15, No.2, pp. 149-157, doi: 10.20965/ijat.2021.p0149, 2021.
  5. [5] S. Tajima, S. Iwamoto, and H. Yoshioka, “Kinematic Tool-Path Smoothing for 6-Axis Industrial Machining Robots,” Int. J. Automation Technol., Vol.15, No.5, pp. 621-630, doi: 10.20965/ijat.2021.p0621, 2021.
  6. [6] T. Suzuki, K. Okamoto, and K. Morishige, “Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surfaces Using a Barrel Tool Considering Continuity of Tool Postures,” Int. J. Automation Technol., Vol.15, No.6, pp. 885-892, doi: 10.20965/ijat.2021.p0885, 2021.
  7. [7] M. Inui, D. Ishii, and N. Umezu, “Comparison of Two Parallel Offsetting Algorithms Free from Conflicts Between Threads,” Int. J. Automation Technol., Vol.15, No.6, pp. 784-793, doi: 10.20965/ijat.2021.p0784, 2021.
  8. [8] M. Inui, K. Kaba, and N. Umezu, “Fast Cutter Accessibility Analysis Using Ray Tracing Cores of GPU,” Int. J. Automation Technol., Vol.15, No.6, pp. 842-851, doi: 10.20965/ijat.2021.p0842, 2021.
  9. [9] A. Caggiano and L. Nele, “Artificial Neural Networks for Tool Wear Prediction Based on Sensor Fusion Monitoring of CFRP/CFRP Stack Drilling,” Int. J. Automation Technol., Vol.12, No.3, pp. 275-281, doi: 10.20965/ijat.2018.p0275, 2018.
  10. [10] T. Yamamoto, R. Matsuda, M. Shindou, T. Hirogaki, and E. Aoyama, “Monitoring of Vibrations in Free-Form Surface Processing Using Ball Nose End Mill Tools with Wireless Tool Holder Systems,” Int. J. Automation Technol., Vol.15, No.3, pp. 335-342, doi: 10.20965/ijat.2021.p0335, 2021.
  11. [11] Y. Yang, H. Wu, and J. Ma, “Electrical System Design and Fault Analysis of Machine Tool Based on Automatic Control,” Int. J. Automation Technol., Vol.15, No.4, pp. 547-552, doi: 10.20965/ijat.2021.p0547, 2021.
  12. [12] Y. Fukushima and N. Kawada, “Online Monitoring Method for Mold Deformation Using Mahalanobis Distance,” Int. J. Automation Technol., Vol.15, No.5, pp. 689-695, doi: 10.20965/ijat.2021.p0689, 2021.
  13. [13] A. Ishigaki and Y. Matsui, “Effective Neighborhood Generation Method in Search Algorithm for Flexible Job Shop Scheduling Problem,” Int. J. Automation Technol., Vol.13, No.3, pp. 389-396, doi: 10.20965/ijat.2019.p0389, 2019.
  14. [14] D. Kajita and N. Moronuki, “Reconfigurable Production Line Design Method for Human Workers – Robotic Cell Collaborated Line Considering Worker’s Attitude Toward Work,” Int. J. Automation Technol., Vol.15, No.6, pp. 754-763, doi: 10.20965/ijat.2021.p0754, 2021.
  15. [15] T. Shimada and H. Suwa, “Optimization of Cutting Tool Allocation to Enhance Workload Balance and Total Completion Time in Parallel-Type FMS,” Int. J. Automation Technol., Vol.15, No.6, pp. 804-812, doi: 10.20965/ijat.2021.p0804, 2021.
  16. [16] M. G. Antonelli and P. B. Zobel, “Automated Screwing of Fittings in Pneumatic Manifolds,” Int. J. Automation Technol., Vol.15, No.2, pp. 140-148, doi: 10.20965/ijat.2021.p0140, 2021.
  17. [17] D. Kato, K. Yoshitsugu, T. Hirogaki, E. Aoyama, and K. Takahashi, “Predicting Positioning Error and Finding Features for Large Industrial Robots Based on Deep Learning,” Int. J. Automation Technol., Vol.15, No.2, pp. 206-214, doi: 10.20965/ijat.2021.p0206, 2021.
  18. [18] A. Hayashi, H. Tanaka, M. Ueki, H. Yamaoka, N. Fujiki, and Y. Morimoto, “Forward Kinematics Model for Evaluation of Machining Performance of Robot Type Machine Tool,” Int. J. Automation Technol., Vol.15, No.2, pp. 215-223, doi: 10.20965/ijat.2021.p0215, 2021.
  19. [19] D. Kato, K. Yoshitsugu, N. Maeda, T. Hirogaki, E. Aoyama, and K. Takahashi, “Positioning Error Calibration of Industrial Robots Based on Random Forest,” Int. J. Automation Technol., Vol.15, No.5, pp. 581-589, doi: 10.20965/ijat.2021.p0581, 2021.
  20. [20] K. Nagao, N. Fujiki, H. Tanaka, A. Hayashi, H. Yamaoka, and Y. Morimoto, “Machining Performance of Robot-Type Machine Tool Consisted of Parallel and Serial Link Based on Calibration of Kinematics Parameters,” Int. J. Automation Technol., Vol.15, No.5, pp. 611-620, doi: 10.20965/ijat.2021.p0611, 2021.
  21. [21] H. Sasatake, R. Tasaki, T. Yamashita, and N. Uchiyama, “Imitation Learning System Design with Small Training Data for Flexible Tool Manipulation,” Int. J. Automation Technol., Vol.15, No.5, pp. 669-677, doi: 10.20965/ijat.2021.p0669, 2021.
  22. [22] K. Tabata, H. Seki, T. Tsuji, and T. Hiramitsu, “Realization of Swing Manipulation by 3-DOF Robot Arm for Unknown String via Parameter Estimation and Motion Generation,” Int. J. Automation Technol., Vol.15, No.6, pp. 774-783, doi: 10.20965/ijat.2021.p0774, 2021.
  23. [23] H. Seki, K. Kawai, and M. Hikizu, “Localization System for Indoor Mobile Robot Using Large Square-Shaped Reflective Marker,” Int. J. Automation Technol., Vol.15, No.2, pp. 182-190, doi: 10.20965/ijat.2021.p0182, 2021.
  24. [24] S. Inoue, A. Urata, T. Kodama, T. Huwer, Y. Maruyama, S. Fujita, H. Shinno, and H. Yoshioka, “High-Precision Mobile Robotic Manipulator for Reconfigurable Manufacturing Systems,” Int. J. Automation Technol., Vol.15, No.5, pp. 651-660, doi: 10.20965/ijat.2021.p0651, 2021.
  25. [25] H. Sawada, H. Tokunaga, and Y. Furukawa, “An IT system development framework utilizable without expert knowledge: MZ Platform,” Synthesiology – English Edition, Vol.8, No.3, pp. 147-157, 2015.
  26. [26] I. Crnkovic and M. Larsson, “Building Reliable Component-Based Software Systems,” Artech House, 2002.
  27. [27] MZ Platform User Group (in Japanese). http://www.monozukuri.org/mzplatform [Accessed February 28, 2022]
  28. [28] Y. Furukawa, “Visualization of workers’ actual achievements in manufacturing site by using IoT,” Instrumentation and Automation, Vol.46, No.13, pp. 6-10, 2018 (in Japanese).
  29. [29] N. Ando, “Introduction to RT-Middleware for Beginners,” J. of Robotics Society of Japan, Vol.28, No.5, pp. 550-555, 2010 (in Japanese).
  30. [30] N. Ando, S. Kurihara, G. Biggs, T. Sakamoto, H. Nakamoto, and T. Kotoku, “Software Deployment Infrastructure for Component Based RT-Systems,” J. Robot. Mechatron., Vol.23, No.3, pp. 350-359, 2011.
  31. [31] Object Management Group. http://omg.org [Accessed February 28, 2022]
  32. [32] OpenRTM-aist. https://openrtm.org [Accessed February 28, 2022]
  33. [33] M. Kourogi, T. Ishikawa, and T. Kurata, “A Method of Pedestrian Dead Reckoning Using Action Recognition,” Proc. of the IEEE/ION Position Location and Navigation Symp. 2010, pp. 85-89, 2010.
  34. [34] T. Okuma, T. Fukuhara, R. Ichikari, C.-T. Chang, L. C. M. Ruiz, T. Shinmura, and T. Kurata, “Role of Servicing Activity Visualization in Quality Control Circle,” Proc. of the 3rd Int. Conf. on Serviceology (ICServ2015), 2015.
  35. [35] PDR Benchmark Standardization Committee (in Japanese). https://unit.aist.go.jp/harc/pdr-bms [Accessed February 28, 2022]
  36. [36] M. Kourogi and T. Kurata, “Personal positioning based on walking locomotion analysis with self-contained sensors and a wearable camera,” Proc. of the 2nd IEEE and ACM Int. Symp. on Mixed and Augmented Reality, pp. 103-112, 2003.
  37. [37] T. Ishikawa, M. Kourogi, T. Okuma, and T. Kurata, “Economic and Synergistic Pedestrian Tracking System for Indoor Environments,” Proc. of 2009 Int. Conf. of Soft Computing and Pattern Recognition, pp. 522-527, 2009.
  38. [38] M. Kourogi and T. Kurata, “A method of pedestrian dead reckoning for smartphones using frequency domain analysis on patterns of acceleration and angular velocity,” Proc. of IEEE/ION Position, Location and Navigation Symp. 2014, pp. 164-168, 2014.
  39. [39] C. Combettes and V. Renaudin, “Comparison of Misalignment Estimation Techniques Between Handheld Device and Walking Directions,” Proc. of Int. Conf. on Indoor Positioning and Indoor Navigation 2015, pp. 13-16, 2015.
  40. [40] R. Ueoka, T. Shinmura, R. Tenmoku, T. Okuma, and T. Kurata, “Introduction of Computer Supported Quality Control Circle in a Japanese Cuisine Restaurant,” Proc. of 4th Int. Conf. on Applied Human Factors and Ergonomics (AHFE), pp. 6632-6641, 2012.
  41. [41] International Electrotechnical Commission, “Safety in the future: 2020,” IEC White Paper, 2020.
  42. [42] G. Herrera-Granados, H. Komoto, and Y. Furukawa, “Recording of machine tool operation plan for the generation of the CNC programs of a parametric CAD model,” Proc. of the 10th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), pp. 615-619, 2021.
  43. [43] L. Monostori, B. Kadar, T. Bauernhansl, S. Kondoh, S. Kumar, G. Reinhart, O. Sauer, G. Schuh, W. Sihn, and K. Ueda, “Cyber-physical systems in manufacturing,” CIRP Annals, Vol.65, No.2, pp. 621-641, doi: 10.1016/j.cirp.2016.06.005, 2016.
  44. [44] G. Herrera-Granados, H. Komoto, and Y. Furukawa, “Analyzing information flow collected across planning and execution stages of machine tools operations,” Proc. of the 10th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), pp. 585-588, 2021.
  45. [45] Node-RED. https://nodered.org [Accessed February 28, 2022]
  46. [46] OPC Foundation. https://opcfoundation.org [Accessed February 28, 2022]
  47. [47] Arduino. https://www.arduiNo.cc [Accessed October 25, 2021]
  48. [48] HCMI Consortium (in Japanese). https://www.hcmi.cons.aist.go.jp [Accessed February 28, 2022]

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 13, 2024