Research Status of Four-wheel Alignment Parameters on Handling Stability and Interval Mileage Prediction
Authors: 
Man Qiu, Qian Wang, Wanzhen Wang, Jie Wang, Jian HuangAuthors Info & Claims
Pages 265 - 267
Abstract
The correct four-wheel alignment parameters of the vehicle are an important prerequisite for ensuring the good handling stability, fuel economy, safety and other performance. It mainly analyzes the research status of four-wheel alignment parameters on handling stability at home and abroad, expounds the relationship between four-wheel alignment parameters and vehicle performance, analyzes the research progress of four-wheel alignment parameters based on different types of vehicles, and the influence of camber angle and kingpin inclination on steering reversal torque and wheel resistance torque. At the same time, the common optimization direction, optimization content and optimization method of four-wheel alignment parameters based on suspension structure are summarized,then analyzes the general detection method of four-wheel positioning parameters, and the change trend of positioning parameters and interval mileage is predicted by the method of regression equation.
References
[1]
Quanbing Long,Jiaohua Cai,Hannian Zhang,Jingyi Zhao,Jun Liu,Zuobing Wang.Evaluation of Vehicle Four-wheel Positioning Measurement Ability and Analysis and Control of Measurement Variation[J].Automobile Industry,2020(11):52-54.
[2]
Xiangli Wang.The influence of vehicle four-wheel positioning on vehicle performance[C]. Proceedings of the 18th Henan Automobile Engineering Science and Technology Symposium.2021:275-276.
[3]
Guohui Xu.The Influence of Position Parameters of Kingpin on Vehicle Handling Stability[D].Shandong University of Technology,2019.
[4]
Haitao Pan,Leiming Shi.Analysis and Design of Back Dip Angle of Front Wheel Positioning Kingpin of Light Vehicle [J]. Scientific and Technological Information2009(03)::487+529.
[5]
Gang Ju,Kaifeng Wang,Xinghua Chen.Suspension Parameters Optimization of A Heavy-duty OFF-road Vehicle Based on Ride Comfort and Operating Stability [J]. Automobile Applied Technology,2018(13):68-70+75.
[6]
Jin Gao.Quantitative research of influence wheel alignment angle on handling index[J].Journal of Engineering Design,2014,21(03):251-258.
[7]
Hongyu Shu,Cheng Zhou,Fusen Zhang.Motion Analysis and Parameter Optimization of Multi-link McPherson Suspension [J]. Mechanical Science and Technology.2018,37(10):1477-1482.
[8]
Yin Liu.Research on Kinematics of McPherson Steering Suspension and Its Secondary Spiral [D].Chongqing University,2016.
[9]
Yanchao Bai,Zilong Shao.Dimension Analysis and Robustness Optimization of Automobile Four-wheel Alignment Parameters[J].Automobile practical technology.2019(07):41-43.
[10]
Jie Bao,Yu Hou,Wei Wang,Tang Chen,Jingjie Wu.Research on Optimization Method of Suspension based on Parameter Matching of Wheel Alignment[J].Vehicle and power technology,2015(02):49-52.
[11]
Jun Ma.Optimization of Alignment Parameter and Steering system Base on Reducing Tyre Wear[D].Hefei University of Technology.2012.
[12]
Dongmei Liu,Wulin Wang,Dayi Qu.Xirui Yang,Yanfeng Jia.Optimization analysis of four-wheel alignment parameters based on suspension system[J].Journal of Qingdao Technological University,2017,38(06):102-107.
[13]
Mengyao Pan,Shaowei Chen,Shisheng Lin,Ruitie Huang,Feng Wang,Yuqing Liu.Research on attitude measurement method of vehicle fourwheel alignment parameters[J].China Measurement & Test,2021,47(05):129-135.
[14]
Feng Sun. Research on Measurement Uncertainty and Calibration Technology of Automobile Four-wheel Alignment Parameters[D].Jiangsu University,2019.
[15]
Pan Fan.Regression Analysis Method on Change of Wheel Alignment Parameters [D].Automation technology and application.2017.,36(07):92-95.
[16]
Hailin Fan. Study on The Influence of Four-Wheel Positioning Parameters Variation on Handling Stability of In-service Vehicle [D]. Chongqing Jiaotong University,2008.
Recommendations
A Technical Research on Parameters Acquisition of Automotive Four-wheel Alignment
AIAM2020: Proceedings of the 2nd International Conference on Artificial Intelligence and Advanced ManufactureFour-wheel alignment parameters are important indexes to promise handling stability when automobile drives in straight line. Aiming at the problems of traditional four-wheel alignment measurement - kingpin inclination angle and kingpin caster angle are ...
Development of a Four Wheel Independent Drive and Four Wheel Independent Steer Electric Vehicle
ISDEA '15: Proceedings of the 2015 Sixth International Conference on Intelligent Systems Design and Engineering ApplicationsA four wheel independent driving four wheel independent steering electric vehicle was developed. Chassis assembly and electrical system assembly about the vehicle are made thorough introduction of in this paper. Identity power control module is taken as ...
Control Strategy for Four-Wheel Steering Vehicle Handling Stability Based on Partial Decoupling Design
CSO '10: Proceedings of the 2010 Third International Joint Conference on Computational Science and Optimization - Volume 01In order to obtain a new steering control structure for vehicles equipped with four-wheel steering system, a linear model of the lateral dynamics is used in this paper. By introducing vehicle sideslip control and yaw rate control decoupling, a more ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
June 2022
905 pages
ISBN:9781450397179
DOI:10.1145/3548608
Copyright © 2022 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 14 October 2022
Check for updates
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
ICCIR 2022
ICCIR 2022: 2022 2nd International Conference on Control and Intelligent Robot
June 24 - 26, 2022
Nanjing, China
Acceptance Rates
Overall Acceptance Rate 131 of 239 submissions, 55%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 24Total Downloads
- Downloads (Last 12 months)4
- Downloads (Last 6 weeks)0
Reflects downloads up to 28 Jan 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format