Over the last three days the ERA estimator SIERA has been introduced, complete with explanations of its origins and the derivation of its formula. Now comes one of the most important aspects of building a new metric: making sure it works and testing it against its peers. Any estimator should be both realistic in its modeling and accurate in its predictive ability. These are not mutually exclusive attributes, however, as you could have a situation where a regression on sock height and induced foul balls caught by middle-aged men holding babies somehow predicts park-adjusted ERA better than anything else. Sure, it tested well, but that type of modeling is absurd and illogical; those two variables should not be assumed to have any impact whatsoever on run prevention. This regression means nothing in spite of its hypothetical test results, but situations may also arise in which the most fundamentally modeled statistic tests poorly.
Realistic modeling is based on a combination of truths and assumptions, as we’ve discussed before; the former being that walk and strikeout rates are stable with the latter suggesting that HR/FB is comprised more of luck than skill. During the course of our post yesterday, it seems safe to say that our modeling is sound as the variables used make sense as far as perceived impact on what they seek to measure. The question then becomes one of how we can test the results to determine how it compares to other estimators currently on the market. For the purposes of this study, we used root mean square error testing, a simple but effective method that informs on the average error between an actual and a predicted array of data. In terms of calculations, RMSE is simple enough to do in Excel: take the difference between the actual and predicted term, square it, and take the square root of the average of those previously squared deltas. When compared to other predictors, the lower the RMSE the better.
With the why and how out of the way, who are we testing? To gauge how SIERA fares as an estimator we must compare it to its colleagues. In this forum, that group would consist of FIP, xFIP, QERA, tRA, raw ERA, and park-adjusted ERA itself. To further ensure data integrity, each of the above statistics was calculated from the same Retrosheet dataset. For FIP, the standard +3.2 constant was dependent upon the league and year in question and not a shell figure, with the same obviously true for the xFIP mark. Additionally, as it pertains to xFIP, we spoke with Dave Studeman of The Hardball Times in order to determine that the expected number of home runs to be substituted into the FIP formula is to be calculated through home runs per outfield flies, not the sum of those and popups. Coding for tRA was the final hurdle, but a bunch of help from the invaluable Colin Wyers helped in that regard. One other note on tRA: since it calculates RA/9 instead of ERA, an adjustment needed to be made that essentially resulted in the creation of tERA, which was the normal tRA value discounted by the difference-league and year dependent-between RA and ERA.
Before getting into the results it would be prudent to discuss some assumptions and goals here. To be blunt, our goal was to beat everyone at predicting park-adjusted ERA in the following season, regardless of HR/FB treatment, and beat everyone but FIP and tRA in terms of same-year predictive value. Though it may sound counterintuitive to openly seek a third-place finish in something like this, the rationale is that both FIP and tRA treat HR/FB as skill rather than luck, meaning that no adjustment at all is made to the home run variable; if we assume that a fluky high or low HR/FB is the true skill level of the pitcher and not in line for adjustment, then of course those metrics will be better at same-year predictivity (should totally be a word, damn that red squiggly line) than one that does apply an adjustment. As we discussed earlier in the week, the intra-class correlation for HR/FB is very low, both from an overall standpoint and one in which the individuals are isolated from their respective teams.
Both tRA and FIP use extra information to retroactively guess ERA, but if we wanted to do that we could use BABIP to more precisely derive an ERA prediction. Looking at tRA, we know that it uses the same information that FIP does, but also takes GB, LD, FB, and PU totals and estimates the expected number of runs and outs that each of these batted balls leads to on average. The assumption is certainly one worth exploring-that pitchers control the rates of each of these batted balls, but that defense and luck determine whether they land in gloves or not. The problem is that this is mostly going to hinge on the assumption that line-drive rates are persistent for pitchers, because line drives are outs far less frequently. Therefore, a pitcher’s line drive rate is going to affect his tRA significantly. However, when we look at the ICC of the pitcher’s line-drive rate relative to the rest of his team, we only get .007. In this regard, tRA takes a luck-based stat used in FIP but adds another luck-laden metric in the rate of line drives and uses that as a main determinant of expected ERA.
The ideas are certainly sound, but assumptions must be tested, which is exactly what we did here with SIERA. If everything plays out the way we hoped, then tRA and FIP will best SIERA in post-dicting same year ERA but will lose at subsequent year predictive value. But the goal isn’t so much to lose to both of them in the same-year RMSEs but as much as it is to beat the other competitors that treat HR/FB similarly, which would be xFIP and QERA. With that series of disclaimers out of the way, the tables below show the same-year and subsequent-year RMSEs for the seven metrics in a variety of different categories and subsets. For starters, here is the table of overall results:
Stat YR-Same YR-Next SIERA 0.957 1.162 tRA 0.755 1.222 FIP 0.773 1.224 xFIP 1.168 1.319 QERA 1.070 1.248 ERA-Park ---- 1.430 ERA 0.094 1.434
Our goals came to fruition, as SIERA beat xFIP and QERA in the same-year RMSE test while besting everyone else in terms of predicting park-adjusted ERA in the following year. The latter is very important as a big purpose of these estimators is to base ERA around repeatable skills that would conceivably lead to better results the next time out. Next, we will break the RMSE test results down into a number of subsets to add a level of granularity to the discussion. These subsets were not chosen at random, either, with each being tested for a specific purpose. Most of these purposes involve specific interactions of skills, thus the name Skill-Interactive Earned Run Average. For starters, here are the pitchers with above average strikeout rates:
Stat YR-Same YR-Next SIERA 0.929 1.135 tRA 0.704 1.191 FIP 0.748 1.191 xFIP 1.191 1.275 QERA 1.032 1.191 ERA-Park ---- 1.401 ERA 0.084 1.404
When looking at the crop of pitchers with an above average SO/PA, the standing of SIERA relative to the overall group remains unchanged. Next up, the group with an SO/PA greater than or equal to one standard deviation from the mean, classified as really high strikeout guys:
Stat YR-Same YR-Next SIERA 0.866 1.218 tRA 0.689 1.229 FIP 0.722 1.216 xFIP 1.214 1.289 QERA 0.972 1.222 ERA-Park ---- 1.430 ERA 0.071 1.432
Here, FIP pulls ever so slightly ahead, but remains very close to SIERA in predicting park-adjusted ERA the following year. SIERA uses a quadratic term on strikeouts, which makes it particularly good at estimating ERA for medium-high levels of strikeouts but does not add anything particularly helpful for very-high levels of strikeouts. Shifting the focus to walks, how do things shake out when looking at below average walk rates (i.e. pitchers with good control)?
Stat YR-Same YR-Next SIERA 0.871 1.071 tRA 0.725 1.133 FIP 0.719 1.125 xFIP 1.105 1.168 QERA 0.915 1.073 ERA-Park ---- 1.329 ERA 0.085 1.336
Interesting results surface here, as SIERA and QERA are very similar as it pertains to walk rates below the league average. Looking at the pitchers with very low walk rates, xFIP and QERA actually predict next-year ERA better than SIERA, while the latter continues to best both of them at same-year predictions. Moving onto ground ball rates, both above average and above one standard deviation from the mean:
Stat YR-Same YR-Next SIERA 1.079 1.153 tRA 0.761 1.205 FIP 0.773 1.202 xFIP 1.071 1.216 QERA 1.088 1.234 ERA-Park ---- 1.419 ERA 0.099 1.422
Stat YR-Same YR-Next SIERA 1.003 1.193 tRA 0.844 1.203 FIP 0.823 1.226 xFIP 1.063 1.217 QERA 1.173 1.272 ERA-Park ---- 1.456 ERA 0.091 1.453
Same story, different metrics. Next up is a table looking at interactions between skills. It looks for low strikeout but high grounder and high walk pitchers, the kinds of hurlers we would expect to allow plenty of baserunners and rely on fielded grounders to wipe the slate clean:
>= AVG GB_PA, BB_PA & <= AVG SO_PA
Stat YR-Same YR-Next SIERA 1.123 1.299 tRA 0.883 1.318 FIP 0.875 1.305 xFIP 1.178 1.408 QERA 1.294 1.477 ERA-Park ---- 1.551 ERA 0.121 1.553
Stat YR-Same YR-Next SIERA 0.876 1.064 tRA 0.698 1.141 FIP 0.708 1.127 xFIP 0.982 1.090 QERA 0.912 1.065 ERA-Park ---- 1.323 ERA 0.086 1.329
In both of these tables, we see the results we would expect. SIERA, being a Skill-Interactive Earned Run Average, does exactly what it should here: beat other estimators at measuring the skill components of pitcher performance that interact with each other. Moving on to elite pitchers:
<= 3.50 ERA-Park
Stat YR-Same YR-Next SIERA 1.221 1.142 tRA 0.833 1.208 FIP 0.873 1.203 xFIP 1.601 1.235 QERA 1.439 1.180 ERA-Park ---- 1.536 ERA 0.063 1.535
With its ability to properly estimate the effects of very strong skill levels, SIERA again beats other estimators that treat HR/FB as luck neutral in predicting same-year park-adjusted ERA and leads all other estimators in predicting next-year park-adjusted ERA.
Looking through all of these different tests, it is apparent not only that SIERA is the best ERA estimator currently available, but specifically that it is exceptionally strong at measuring the skill level of specialized kinds of pitchers. To make this less abstract, tomorrow’s fifth and final article in our introductory series will discuss three specific examples of pitchers who are unique in their skill sets, and are particularly troublesome for other estimators. SIERA will perform excellently with all three, which should leave you with a solid understanding of what SIERA does and why it is so important.
Thank you for reading
This is a free article. If you enjoyed it, consider subscribing to Baseball Prospectus. Subscriptions support ongoing public baseball research and analysis in an increasingly proprietary environment.
Subscribe now
That you can go out to two and three places past the decimal and get "better" numbers is all well and good. But I'm having a hard time putting the improvements of 0.0xx in RMSE in context. What is the meaningful impact of that small level of improvement?
Or perhaps better yet, are any of these improvements outside the margin of error for these various metrics?
I should note that if you do these tests separately for EACH YEAR from 2003-09, SIERA is ahead of the same estimators EVERY time. This is a large difference even if we're dealing with ERAs which are necessarily going to require some decimals.
I would like to see a correlation matrix of each against all.
IOW, if I really want to rely in a particular indicator for 2010, is there any reason, for example, to prefer SIERA to FIP -- or do they each beat the other as often as not?
Next-year ERA for
03-04, 04-05, 05-06, 06-07, 07-08, 08-09
SIERA 1.107 1.141 1.179 1.186 1.107 1.248
QERA 1.237 1.237 1.219 1.277 1.206 1.316
xFIP 1.284 1.403 1.211 1.404 1.287 1.311
FIP 1.120 1.230 1.298 1.236 1.170 1.283
tRA 1.162 1.202 1.273 1.216 1.171 1.307
ERA_pk 1.391 1.388 1.488 1.429 1.390 1.493
As you can see, it's ahead every time and offers a solid improvement if you compare the difference between the other estimators and regular ERA_pk to the difference between the other estimators and SIERA.
If I want to look at future ERA I would use TRA* instead of TRA as they advise on StatCorner. How does SIERA do against TRA* for predicting next year ERA?
I also understand if you don't want to include any metric that regress the components. But what about a SIERA*? Would this be better than SIERA at predicting next year ERA? And what about when SIERA* means an individual regression rather than regressing toward league average. So how does SIERA do at predicting 2009 ERA when you input a Marcel produced from 2006-2008 data instead of just 2008 data?
The main thing though is that tRA as a metric has a major problem in that it is affected so much by line-drive rate. Since we found that LD/Batted Ball had an ICC of 0.007-- which is pretty much the closest thing to zero I can remember seeing in sabermetrics-- it doesn't make sense to use it. I heard its inventor say once that LD/Ball in Air had a high correlation but that's because Fly Ball/Batted Ball has a high correlation and it's picking that up. If you picked (Pitcher's Birthdate)/(Pitcher's Birthdate + Fly Ball%) and checked its correlation, it would be high as well. It's just that you can't then call birthdate significant any more than you can call line drive rate significant.
In my opinion, it would be a little difficult to implement everything from Siera in PECOTA because PECOTA's system relies on matching a given player's baseline performance (last three years) with the set of all pitchers of the same age who played in the majors since 1946. But there are probably some insights to be gained in refiguring the baseline performance ERA (using SIERA instead) for the player of interest. Just my opinion.
Anyway, the main problem with this is an increased reliance on sample size; judging by how Matt/Eric were already lamenting the sample size in re: GB/BB interaction, this isn't going to be practical quite yet, even with only 3 dimensions. Although i do agree that it would be handy to take a look at the residuals along each dimension to see how the quadratic assumption is working out. Given that this metric seems to be relatively weakest when extreme skills are demonstrated, it is possible that there could be some room for improvement here.
-j
We developed the coefficients by regressing on SAME-year ERA. So the tests on NEXT-year ERA are legitimately different. Also, to check, we ran the regression on the 2003-08 ERA for same-year data and then used those coefficients to compute 2009 SIERA stats and then checked same-year ERA and it finished similarly.
Thanks for asking again, actually, because this question should be highlighted rather than obscured and have other people miss it.
Anyway, that makes me feel a lot better about the data you're reporting. I'm sure you'd still have to tune your regression differently as you move to a different era, but we're mostly interested in modern baseball anyway. :)
-j
-j
-j
http://statcorner.com/tRAabout.html
You can extract the process from it easily, and with a few massages you can do it at home. I did this in some power rankings I did last year for BtB. The correct way to do it would require play by play data, though, so you need to use retrosheet, gameday, etc, to generate your expected runs and expected outs.
-j
I don't remember any conversation about this at all.